Abstract:Red mud (RM) cementitious materials were prepared with the thermally, thermoalkali- or thermocalcium-activated RM, steel slag (SS), and other additives. The effects of different thermal RM activation methods on the cementitious material hydration mechanisms, mechanical properties, and environmental risks were discussed and analyzed. The results showed that the hydration products of different thermally activated RM samples were similar with the main products being C-S–H, tobermorite, and Ca(OH) 2 . Ca(OH) 2 was mainly present in thermally activated RM samples, and the tobermorite was mainly produced by samples prepared with thermoalkali- and the thermocalcium-activated RM. The mechanical properties of the samples prepared by thermally and thermocalcium-activated RM had early-strength properties, while the thermoalkali-activated RM samples were similar to the late-strength type of cement properties. The average flexural strength of thermally and the thermocalcium-activated RM samples at 14 days were 3.75 MPa and 3.87 MPa respectively, whereas, the 1000 °C thermoalkali-activated RM samples only at 28 days was 3.26 MPa; the above data could reach the single flexural strength (3.0 MPa) of the first-grade pavement blocks of the building materials industry standard of the People's Republic of China-concrete pavement blocks (JC/T446-2000). The optimal preactivated temperature for different thermally activated RM was different; the optimal preactivated temperature for both thermally and thermocalcium-activated RM was 900 °C, and the flexural strength was 4.46 MPa and 4.35 MPa, respectively. However, the optimal preactivated temperature of thermoalkali activated RM at 1000 °C. The 900 °C thermally activated RM samples had better solidified effects for heavy metal elements and alkali substances. 600~800°C thermoalkali activated RM samples had better solidified effects for heavy metal elements. Different temperatures of thermocalcium-activated RM samples showed different solidified effects on different heavy metal elements, which may be due to the influence of thermocalcium activation temperature on the structural changes of the hydration products of the cementitious samples. In this study, three thermal RM activation methods were proposed, and the co-hydration mechanism and environmental risk study of different thermally activated RM and SS were further elucidated. This not only provides an effective method for the pretreatment and safe utilization of RM, but also facilitates the synergistic resource treatment of solid waste and further promotes the research process of replacing part of traditional cement with solid waste.

The Effect of Incorporation of Red Mud on the Properties of Clay Ceramic Bodies

Effects of Red Mud on Workability and Mechanical Properties of Autoclaved Aerated Concrete (AAC)

The Effects of Mineral Composition and Sintering Temperature on Synthetic Mullite

Effect of Red Mud on Mechanical Properties of Loess–Containing Aluminosilicate Based Cementitious Materials

Preparation of lightweight high-strength thermal insulation and decoration integration porous ceramics using red mud

Solidification Mechanism of Bayer Red Mud under the Action of Calcium Hydroxide

Effects of thermal treatments on the characterisation and utilisation of red mud with sawdust additive

Characterization and properties of Chinese red clay for use as ceramic and construction materials

Preparation mechanism and properties of thermal activated red mud and its geopolymer repair mortar

Mechanical Properties and Microstructure of Lime-Treated Red Clay

Preparation and Mechanism of the Sintered Bricks Produced from Yellow River Silt and Red Mud.

Effects of Different Aluminum Sources on Morphologies and Properties of Ceramic Floor Tiles from Red Mud

Toughening Mechanism of CaAl12O19 in Red Mud–Al2O3 Composite Ceramics

Study on microscopic pores and physico-mechanical properties of red clay modified by calcium carbonate

Numerical Simulations of the Impact of CaO/Al2O3 on the Structure and Crystallization Behavior of Red Mud

Influence of Solid Waste Material Content on the Properties of Steel Slag-Waste Clay Brick Ceramic Bricks

Study on hydration mechanism and environmental safety of thermal activated red mud-based cementitious materials

Study on the physical properties of red clay cured by different external admixtures combined with enzyme induced carbonate precipitation technology

The synergistic hydration mechanism and environmental safety of multiple solid wastes in red mud-based cementitious materials

Structural investigation relating to the cementitious activity of bauxite residue — Red mud

Preparation and characterization of porous anorthite ceramics from red mud and fly ash