Abstract:The red clay is widely distributed in Guizhou province, which is characterized by high natural moisture content, difficult compaction and serious shrinkage and crackingin, and phosphogypsum is discharged for 5 million tons every year in Guizhou province. For the sake of effectively reducing the accumulation of phosphogypsum, mixtures were prepared with cement as a curing agent and mass ratios of cement to phosphogypsum of 1:1, 1:2 and 1:3 (low content phosphogypsum group) and phosphogypsum to red clay of 1:1, 1:2 and 1:3 (high content phosphogypsum group). Unconfined compressive strength, expansion, shrinkage and dynamic characteristic tests were conducted to analyze the behavior and mechanical properties of the mixtures. The modification mechanism of the mixtures by phosphogypsum was further explored by XRD (X-ray diffraction) and SEM (scanning electron microscopy). which provided a theoretical basis for the application of phosphogypsum in highway engineering and improved the engineering properties of red clay. The results show that the unconfined compressive strength of the phosphogypsum stabilized soil in the low content phosphogypsum group is greater than that in the high content phosphogypsum group. When cement:phosphogypsum = 1:2.2–1:3, the unconfined compressive strength of the mixture is maximum. When cement:phosphogypsum = 1:3, the maximum dynamic shear modulus of phosphogypsum stabilized soil is the largest. The absolute expansion rate and linear shrinkage rate of phosphogypsum stabilized soil in the low content phosphogypsum group are greater than those in the high content phosphogypsum group. When cement: phosphogypsum = 1:1–1:3, the absolute expansion rate is 6.5–12.3%, and the linear shrinkage rate is 1.3–2%. When red clay:Phosphogypsum = 1:1–1:3, the absolute expansion rate is 0.2–4%, and the linear shrinkage rate is 1–1.5%. The more phosphogypsum content, the smaller the expansion deformation and shrinkage deformation of the mixture. It is suggested that mass ratios of phosphogypsum to red clay is 1:1, and the cement content is 5%. Which can not only make full use of phosphogypsum solid waste, but also improve the engineering properties of red clay.

Study on the physical properties of red clay cured by different external admixtures combined with enzyme induced carbonate precipitation technology

Fundamental Mechanical Behavior of CMMOSC-S-C Composite Stabilized Marine Soft Clay

Study on Mixing Cement-Waste By-Product to Stabilize Soft Marine Clay

Study on Mechanism of Muddy Soil Stabilization

Experimental Study on Mechanical Properties of Soft Clay Stabilized by Industrial By-Products

Study on the Effects and Mechanism of the Reinforcement of Soft Clay Via Microbially Induced Carbonate Precipitation

Study on microscopic pores and physico-mechanical properties of red clay modified by calcium carbonate

Stabilization/solidification characteristics of organic clay contaminated by lead when using cement.

Performance evaluation and stabilization mechanism of red clay treated with polyurethane

Research on Road Characteristics and the Microscopic Mechanism of Lime–Phosphogypsum-Stabilized Red Clay

LABORATORY TEST STUDY ON MECHANICAL PROPERTIES OF ADDITIVE TO ORGANIC CEMENT RED CLAY IN GUILIN REGION

Mechanical properties and modification mechanism of phosphogypsum stabilized soil

Experimental Study on the Mechanical Properties and Microstructure of Metakaolin-Based Geopolymer Modified Clay

Multiscale Study of the Influence of Promoters on Low-Plasticity Clay Stabilized with Cement-Based Composites

Experimental Study on the Curing Mechanism of Red Mud-Based Stabilized Soil Co-Modified by Nano-SiO2 and Gypsum

Mechanical Properties and Microstructure of Lime-Treated Red Clay

Microstructural Mechanism of Reactive Magnesia Carbonated and Stabilized Silty Clays

Synergetic Effects of Alkaline and Sulfate-Based Waste Binders on Undrained Triaxial Behavior of Cement-Admixed Soft Clay

Multiscale experimental analysis of marine clay stabilized with coal gangue–calcium carbide residue geopolymer

Performance Evaluation and Modification Mechanism of Red Clay Treated with Lignosulfonate

Experimental Study On Mechanical Properties Of Cement-Treated Red Clay In Guilin