Abstract:The effects of nanosized reinforcement particles on precipitation reactions in age-hardenable Al alloy matrix composites have been largely unknown. In this work, an Al-Zn-Mg-Cu matrix composite reinforced with uniformly distributed TiB2 nanoparticles was successfully produced. The solid-soluted, peak-aged and overaged materials were then characterized, at the atomic scale using (high-resolution) scanning transmission electron microscopy, to provide a fundamental insight into the interface precipitation. Our results demonstrated that the facetted TiB2 nanoparticles have a significant impact on the precipitation in matrix areas adjacent to the TiB2/Al interfaces. The interfaces after solid-solution treatment are tightly-bonded and oxide-free, and display two orientation relationships (ORs): the well-reported [21¯1¯0]TiB2//[101]Al, (0001)TiB2//(1¯11)Al (OR1) and the new [21¯1¯0]TiB2//[101]Al, (011¯0)TiB2//(111¯)Al (OR2). The interface precipitates (i.e. interphase) having the size of several tens of nanometers were formed after ageing and were determined to be (Zn1.5Cu0.5)Mg phase. Their formations were only related to the initial OR1 and OR2 where the mutual ORs between the TiB2, interphase and Al matrix were further developed. Periodically spaced misfit dislocations were revealed at the semi-coherent TiB2/Al interfaces, which are generally considered beneficial to the heterogeneous precipitation. They not only reduced nucleation energy barrier, but also acted as short-circuit diffusion paths for transporting solute atoms and vacancies, accelerating growth rate. However, the growth of interphase at the interface parallel to close-packed {111} Al planes was suppressed by the ultra-low accommodation factor. In addition, such an interface precipitation reduced the mismatch of the TiB2/Al interface, increasing the overall coherency and being potential for effective interface strengthening.

Precipitation Behaviour of Al3Zr Precipitate in Al–Cu–Zr and Al–Cu–Zr–Ti–V Alloys

Evolution of Precipitate and Precipitate/matrix Interface in Al-Zn-Mg-Cu(-Ag)alloys

Atomic-scale computer simulation of mixture precipitation mechanism for Ni75AlxV25-x alloy

Early Stages of Precipitation in Γ' Phase of a Ni–Al–Ti Model Alloy: Phase-Field and First-Principles Study

New insight into precipitation of Al3Zr and correlative effect on recrystallization behavior in a rapidly-solidified Al-Zn-Mg-Cu-Zr alloy

Precipitation Sequence of Middle Al Concentration Alloy Using the Inversion Algorithm and Microscopic Phase Field Model

First-Principles study on the nucleation of precipitates in ternary Al alloys doped with Sc, Li, Zr, and Ti elements

Precipitation in Al-Zr-Sc alloys: a comparison between kinetic Monte Carlo, cluster dynamics and classical nucleation theory

Unraveling L1 2 Al 3 X (X=Ti, Zr, Hf) Nano-Precipitate Evolution in Aluminum Alloys via Multi-scale Diffusion Simulation

COMPUTER SIMULATION FOR PRECIPITATION PROCESSO Ni_<75>Al_<2.5>V_<22.5> ALLOY WITH THE MICROSCOPIC PHASE-FIELD METHOD

Fine precipitation scenarios of AlZnMg(Cu) alloys revealed by advanced atomic-resolution electron microscopy study Part I: Structure determination of the precipitates in AlZnMg(Cu) alloys

Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al–Zn–Mg–Cu matrix composite

On the formation of anti-phase boundaries and interphase boundaries in Al3Zr precipitates of Al-Cu-Zr alloy studied at atomic scale

TEM characterization of the precipitation reaction in Ti–48Al–10Nb alloy

Effect of Ag addition on the age hardening and precipitation behavior in an Al-Cu-Li-Mg-Zn-Mn-Zr alloy

In-situ TEM study on the precipitation behavior of an Al-Mn-Mg-Sc-Zr alloy formed by SLM

Microstructure and Precipitates in Mg-Zn-Y Alloys

Composite precipitates in a commercial Al–Li–Cu–Mg–Zr alloy

Precipitation and crystallographic relationships of nanosized η/η’ precipitates at S-Al interface in Al-Zn-Mg-Cu alloy

Precipitation Thermodynamics in an Al–Zn–Mg Alloy with Different Grain Sizes

Investigation on formation mechanism of T1 precipitate in an Al-Cu-Li alloy