Abstract:This study examines the impact of varying Sn content on the microstructure, electrochemical performance, and discharge characteristics of the Al-0.2 Mg-0.02In-xSn-0.02Bi aluminum anode in an alkaline electrolyte. The purpose of this study is to examine the best quantity of Sn element addition to enhance the discharge performance of aluminum alloy anodes. The study utilized scanning electron microscopy (SEM), EPMA to analyze the characteristics of the alloy's secondary phase and the morphology of corrosion. In addition, the electrochemical performance and discharge properties of the alloy anode were assessed using various methods, including self-corrosion rate, open-circuit potential, potentiodynamic polarization, alternating current impedance, and constant current discharge tests. Incorporating Sn elements, where Sn atoms are dissolved in the aluminum matrix, results in a significant increase in the overpotential for hydrogen evolution. This leads to a reduction in self-corrosion rates and an improvement in discharge performance. Nevertheless, as the tin (Sn) content rises, the greater amount and larger size of tin-rich phases create galvanic cells with the aluminum matrix, resulting in higher rates of self-corrosion and reduced discharge performance. When the Sn content in the alloy anode is 0.03%, the overall performance is optimal. Its anode utilization rate and energy density are 91% and 4213 mWh g −1 (at 50 mA cm −2 ), respectively. Compared to the Sn-free aluminum alloy anode, they have been improved by 33.6% and 1626 mWh g −1 , respectively.

Effects of Alloying Elements on Electrochemical Performance of Aluminum Anodes

Influence of Alloying Elements on Electrochemical Behavior and Microstructure of Al Anode Materials

Exploring the Effect of Magnesium Content on the Electrochemical Performance of Aluminum Anodes in Alkaline Batteries

Revealing the Effect of Aluminum Content on the Electrochemical Performance of Magnesium Anodes for Aqueous Batteries

Effects of Alloying Elements on the Electrochemical Behaviors of Al-Mg-Ga-In Based Anode Alloys

Effects of Solid-Solute Magnesium and Stannate Ion on the Electrochemical Characteristics of a High-Performance Aluminum Anode/electrolyte System

Electrochemical Performance of Al-Mg Based Sacrificial Anodes

Effect of Microstructure Evolution on the Discharge Characteristics of Al-Mg-Sn-based Anodes for Al-air Batteries

Effect of Sn on Microstructure and Electrochemical Properties of Mg Alloy Anode Materials

Effects of Al and Sn on Microstructure, Corrosion Behavior and Electrochemical Performance of Mg–Al-based Anodes for Magnesium-Air Batteries

The Effect of Annealing on Electrochemical Performances of an Al–Sn–Ga–Mg Alloy as an Anode for Al–air Batteries in Alkaline Electrolytes

Effects of Electrolyte Additives on Behavior of Al-In-Ga-Pb Alloy Anode

Electrochemical Behavior of Anodes Based on Al-In-Mg Alloys in NaOH Solution

Studies On The Anodic Behavior Of Aluminum Electrodes In Alkaline-Solution

Electrochemical Performance of Pure Al, Al–Sn, Al–Mg and Al–Mg–Sn Anodes for Al-air Batteries

Effects of Al and Sn on Electrochemical Properties of Mg-6%Al-1%Sn （mass Fraction） Magnesium Alloy As Anode in 3.5%nacl Solution

Effects of Alloying Elements on the Corrosion Behavior and Discharge Performance of Al-Zn-Mg-In-Ti-Sn Sacrificial Anode

Performance of an Al–0.08Sn–0.08Ga–xMg Alloy As an Anode for Al–air Batteries in Alkaline Electrolytes

Establishment of electrode potential-composition plot of Al-Mg-Zn alloys and sacrificial anode protection tests

Effect of Ga on Microstructure and Electrochemical Performance of Al–0.4Mg–0.05Sn–0.03Hg Alloy As Anode for Al–air Batteries

The influence of Sn content on the electrochemical performance and discharge characteristics of Al-0.2Mg-0.02In-xSn-0.02Bi alloy anodes in aluminum-air batteries