Abstract:The Ural region has a large number of metallurgical companies. The extraction of metals from ore is always accompanied by the accumulation of wastes. Currently, most of the wastes are stored in dumps and storage facilities forming technogenic deposits. One such that occupies huge areas is copper slag from the copper-smelting production. According to current estimations, about 2.2 tons of slag is formed for each ton of copper produced and about 24 million tons are produced annually [1]. In general, a copper slag contains about 35-45% iron and 0.4-0.5 copper, which indicates that this is a valuable secondary resource for recycling and utilization [33]. However, more than 80% of copper slag is not utilized, which makes it possible to consider this waste not only as a valuable material, but also as a potential hazard for the environment; it contaminates the soil and water with heavy elements [8]. Currently, only small amounts of the waste are recycled. In addition, technologies do not allow the complete extraction of valuable elements. This offers potential for the development of new highly efficient technologies for processing copper smelting wastes with extraction of valuable elements such as iron (Fe). Improvement of Fe quality requires a decrease in non-ferrous metal content, especially Cu. In recent years, extensive research was directed at the extraction of valuable materials from copper slags by high-temperature firing of copper conglomerates with subsequent magnetic separation or leaching of non-ferrous metals. However, these studies do not allow the complete processing of copper smelting slags. This work studies the production of iron-containing briquettes from copper-smelting slags, and their subsequent processing to obtain valuable products for metallurgical and oil companies. Keywords: briquette, reduction, cast iron, proppants

‘One Step’ Technology to Separate Copper, Zinc, Lead from Iron in Metallurgical Slag and Pyrite Cinder Part 1 – Laboratory Scale Test

Recovery of valuable elements from pyrite pyrolysis slag using magnetic separation-flotation technique

Innovative methodology for the utilization of low-grade pyrite cinder containing heavy metals via hydrothermal alkali melting followed by chlorination roasting

Recovery of Copper, Lead and Zinc from Copper Flash Converting Slag by the Sulfurization-Reduction Process

A Thermodynamic and Experimental Assessment of the Recovery of Copper, Iron, Zinc, and Lead from Copper Slag

An efficient approach to utilize copper smelting slag: Separating nonferrous metals and reducing iron oxide at high temperature

Study on Separation of Iron from Waste Slag of Pyrite Processing

Stepwise Utilization Process to Recover Valuable Components from Copper Slag

A novel approach for the resource utilization of zinc-bearing dust and sludge via the blast furnace main trough

Preparation of Direct Reduction Sponge Iron (DRI) Using Pyrite Cinder Containing Nonferrous Metals

Effect of Iron Phase Evolution on Copper Separation from Slag Via Coal-Based Reduction

Breaking the Fe3O4-wrapped copper microstructure to enhance copper–slag separation

A green method to clean copper slag and rapidly recover copper resources via reduction-sulfurizing smelting and super-gravity separation at low temperature

A new eco-friendly approach for recovery of iron from copper smelting slag: Using CO2 and Cl2 recycling strategies

Complex Processing of Copper Smelting Slags with Obtaining of Cast Iron Grinding Media and Proppants

Thermodynamic Phase Conversion Mechanism on Copper–Cobalt Slag Cleaning Process Using Gypsum Wastes as Sulfurizing Agent

A Novel Method of Extracting Iron from High-Iron Red Mud and Preparing Low-Carbon Cement Clinker from Tailings

An approach of cobalt recovery from waste copper converter slags using pig iron as capturing agent and simultaneous recovery of copper and tin

Ferrous low alloy making from Jinchuan flash smelting slag by smelting reduction

Eco-friendly iron extraction from fe-containing copper smelting slag via reduction roasting with coal and magnetic separation: Experimental and mechanism insights

Reduction of Copper Smelting Slag by Carbon for Smelting Cu-Fe Alloy