Abstract:Over 50 million tons of copper slag are produced worldwide annually. Stacking is currently the primary method used to treat copper slag, resulting in resource wastage and environmental issues. Using slag as a raw material in the steel industry is areasonablesolution. However, the presence of nonferrous metals degrades steel performance and corrodes smelting equipment, and the remaining slag poses environmental and sustainable challenges. Thus, this study focused on removal of nonferrous metals from copper slag and subsequent reduction of iron oxide. The experimental results showed that increasing the percentage of the chlorinating agent (calcium chloride), temperature, and duration, the removal percentage of copper initially increased linearly, then plateaued. The acidity coefficient had a marginal effect on copper removal percentage. The optimum chlorination roasting conditions were 13 % calcium chloride, 1373 K, and 0.5 h, resulting in removal percentages of 90.3 %, 81.9 %, and 82.7 % for copper, zinc, and lead, respectively. The appropriate oxygen partial pressure for chlorination roasting was 10-5-0.7 atm. The reduction percentage of iron oxide was approximately 82 % under roasting conditions of 1.5 h at 1373 K. Based on these results, a novel scheme for copper slag utilization is proposed that involves chlorination roasting for nonferrous metal removal, reduction roasting for iron oxide reduction, and melting to obtain molten iron and separate molten slag. The iron and slag are used for steel manufacturing and rock wool preparation, respectively. This scheme provides apromisingway to efficiently use copper slag, which will reduce primary resource consumption and pollution.

Breaking the Fe3O4-wrapped copper microstructure to enhance copper–slag separation

Density Tuning in Conjunction with Pelletizing of Reductants for Enhanced Recovery from Copper Smelting Slag

Reduction of Copper Smelting Slag by Carbon for Smelting Cu-Fe Alloy

Recovery of Cu-Fe Alloy from Copper Smelting Slag

An efficient approach to utilize copper smelting slag: Separating nonferrous metals and reducing iron oxide at high temperature

A green method to clean copper slag and rapidly recover copper resources via reduction-sulfurizing smelting and super-gravity separation at low temperature

Recovery of high-grade copper matte by selective sulfurization of CuO–Fe2O3–SiO2–CaO system

Effect of Iron Phase Evolution on Copper Separation from Slag Via Coal-Based Reduction

Thermodynamic Phase Conversion Mechanism on Copper–Cobalt Slag Cleaning Process Using Gypsum Wastes as Sulfurizing Agent

Quantitative characterization and magnetic separation of copper pyrometallurgical tailing for molybdenum and copper pre-concentration and cleaning of environmentally hazardous elements

Separation of silicon and iron in copper slag by carbothermic reduction-alkaline leaching process

Iron and copper recovery from copper slags through smelting with waste cathode carbon from aluminium electrolysis

Multiphase Equilibrium Relationships between Copper Matte and CaO-Al2O3-Bearing Iron Silicate Slags in Combined Smelting of WEEE and Copper Concentrates

Characterization, Concentration, and Speciation of Metal Elements in Copper Slag: Implications for Secondary Metal Recovery

Phase Transformation of Impurity Elements and High-efficiency Impurity Removal in Complex Copper Concentrate Smelting Process

An unconventional approach for the efficient recovery of iron, cobalt, copper and silicon from copper slag

Direct-to-blister smelting of copper concentrate based on a calcium ferrite slag system

A novel strategy for harmlessness and reduction of copper smelting slags by alkali disaggregation of fayalite (Fe2SiO4) coupling with acid leaching

Efficient recovery of zinc and copper from copper smelting slag (CSS) by cooperative modification with a composite medium of FeS-O2

Recovery of valuable elements from pyrite pyrolysis slag using magnetic separation-flotation technique

Element Distribution and Migration Behavior in the Copper Slag Reduction and Separation Process