Abstract:In the conducted experiment, a transformative change in heat transfer rate and productivity was observed when copper oxide nanoparticles were mixed with petroleum jelly and stored in a copper cylinder within the solar still. The heat transfer rate increased by 20 %, and the daily productivity of the system seen a significant improvement, with a 20 % increase compared to a phase change material (PCM) system and 40 % simple solar still (SS). The dispersed nanoparticle created a modified internal microstructure, forming a network or aggregate structure depending on their concentration and dispersion quality. This modified microstructure significantly improved the efficiency of heat transfer pathways, leading to 20 % faster heat transfer. The novel approach employed in this experiment distinguished itself from traditional solar stills and PCM based system. The exceptional thermal conductivity of the nanoparticles facilitated rapid absorption of solar radiation, resulting in increased energy input to the system and accelerated evaporation processes. The simulation result obtained using Comsol Multiphysics 5.6 indicated that even under solar radiation condition equivalent to zero, the temperature distribution of the nanoparticles enhanced phase change material based solar still system favourable, and heat transfer was efficient. Under zero solar radiation conditions, the phase change material with nanoparticle in solar still system (NPCM) exhibited a temperature 56.9 °C at 19.00 PM in the experimental condition and, in the simulation it has been found 56.1 °C respectively. The simulation results closely aligned with the experimental results. The daily productivity of the PCM and NPCM based homogeneous systems have been found to be 2945 and 4075 mL/m 2 -day higher, respectively, compared to simple solar still (SS) productivity 2120 mL/m 2 -day. Based on these experimental findings, it can be concluded that the NPCM system is more effective than the PCM based and simple solar still system. This can be attributed to the increased thermal conductivity, enhanced heat transfer rate, and improved evaporation rate achieved through the integration of copper oxide nanoparticles. Therefore, in regions with limited access to portable water, the NPCM system proves to be a highly useful and economically viable solution.

Exergoenvironmental assessment of a solar still modified with the evacuated tube heat pipe using paraffin wax

Experimental investigation of a solar still system with a preheater and nanophase change materials

Development of a vacuum double-slope solar still for enhanced freshwater productivity

Exergo-enviro-economic and yearly productivity analyses of conical passive solar still for sustainable solar distillation

Enhancing solar distillation through beeswax-infused tubular solar still with a heat exchanger using parabolic trough collector

Improving single-slope passive solar still efficiency through integration of phase change materials and Al2O3 nanoparticles

Improved Thermal Performance and Distillate of Conventional Solar Still via Copper Plate, Phase Change Material and CuO Nanoparticles

Improving solar still performance with heat pipe/pulsating heat pipe evacuated tube solar collectors and PCM: An experimental and environmental analysis

Comparative Study of Tubular Solar Stills with Phase Change Material and Nano-Enhanced Phase Change Material

Optimizing cord pyramid solar distillers: A comprehensive study on square baffles, reflectors, and phase transition materials

Enhancing the performance of double-slope solar still using nano-enhanced eutectic phase change materials and steel wool fibre as wick material

Thermodynamic and economic analysis of heat pump-assisted solar still using paraffin wax as phase change material

A comprehensive 4E (energy, exergy, economic, environmental) analysis of novel pyramid solar still coupled with pulsating heat pipe: An experimental study

Thermoenviroeconomic performance augmentation of solar desalination unit integrated with wick, nanofluid, and different nano-based energy storage materials

Parametric analysis of evacuated annular parabolic solar receiver integrated solar stills: a relative optimization approach

Performance Enhancement of Solar Still Unit Using v-Corrugated Basin, Internal Reflecting Mirror, Flat-Plate Solar Collector and Nanofluids

Theoretical assessment of a solar still system equipped with Nano-phase change materials

Performance assessment of single slope solar still by the incorporation of palm flower powder and micro phase change material for the augmentation of productivity

Improving solar still performance: A comparative analysis of conventional and honeycomb pad augmented solar stills

A novel numerical model for solar still combined with collector and reflector

Improving solar still efficiency with nanoparticles – Infused copper cylinders and latent heat storage: An experimental and simulation study