Abstract:Phenolic resins occupy an important position in industrial applications, but phenol, one of the raw materials for synthesis, is a non-renewable resource. Lignin, as a natural polymer containing phenolic hydroxyl groups, alcohol hydroxyl groups and other reactive groups, can replace some of the phenol in the synthesis of phenolic resins, which can reduce the amount of phenol, thus reducing the cost of phenolic resins, while effectively promoting the high value-added use of renewable biomass resources. Due to its low reactivity, alkaline lignin is usually discharged as production waste, unaware that lignin macromolecules can be modified. In this paper, the phenolic monomers were obtained by acid-catalyzed depolymerization of DES (choline chloride/p-toluenesulfonic acid or choline chloride/lactic acid) from waste alkaline lignin, and the recovery rate of the DES solution during the catalytic treatment was more than 85 %, in which the main monomer was 2-methoxy-4-(1-propyl) phenol. The degradation of alkaline lignin is still favorable after five times of DES solvent recovery. The depolymerized lignin monomer replaced phenol by 50 wt% and then ternary co-polymerized with phenol and formaldehyde to form a biomass phenol-based phenolic resin, providing a green route for phenolic resin production. The cost of resin preparation was economically calculated, and it was found that the cost of resin after accumulating 4 cycles of DES treatment was only 51.1 % of that of pure phenolic resin. The density functional theory (DFT) was used to simulate the possible radical reactions in the intermediate process of phenolic resin reaction, to explore the microscopic mechanism and competition, to provide theoretical reference for further experimental realization of resin structure control and optimization, and to improve the theoretical system of resin synthesis.

Synthesis and Property of Solid Resol Phenolic Resins with High Molecular Weight

Novel Silicon-Modified Phenolic Novolac Resins: Non-isothermal Curing Kinetics, and Mechanical and Thermal Properties of Their Biofiber-Reinforced Composites

Synthesis and Characterization of N-phenyl Maleimide Modified Novolac Resin

Effect of molecular weight and molecular weight distribution on cure reaction of novolac with hexamethylenetetramine and properties of related composites

Progress in Kinetic Study and Process Development for Synthesis of Novolac Phenolic Resins

Synthesis of CNSL Modified Novalac Phenolic Resin and Properties of Its Molding Composite

New Insights into High-Ortho Phenolic Novolac: Elucidating Dependence Between Molecular Structure, Curing Kinetics and Thermal Stability

Preparation of glass fiber reinforced phenolic injection molding materials and its properties

Acetylene-Grafted Resins Derived from Phenolics Via Azo Coupling Reaction

The synthesis and characterization of phenolic resin with a high content of dimethylene ether bridges

The Effect of Introducing B and N on Pyrolysis Process of High Ortho Novolac Resin

Novolac/Phenol-Containing Phthalonitrile Blends: Curing Characteristics and Composite Mechanical Properties.

Preparation of high molecular weight thermoplastic bio-based phenolic resin and fiber based on lignin liquefaction

Reactivity and Property of Phenolic Resin Synthesized by Phenol and Paraformaldehyde

Optimization of preparation techniques for high-temperature resistant waterborne phenolic-epoxy resin emulsion under low carbon background

Synthesis of a water‐soluble high hydroxymethyl content phenolic resin crosslinker and the associated polyacrylamide weak gel property investigation

Study on Epoxy Resin with Phenolic Novolac Hardeners Synthesized by a Novel Process with Environmental Protection

Fast Curing Bio-Based Phenolic Resins via Lignin Demethylated under Mild Reaction Condition

Characterization and properties of phenolic resin doped modified lignin

Structure–properties relationship for resols with different formaldehyde/phenol molar ratio

The Effect of Free Dihydroxydiphenylmethanes on the Thermal Stability of Novolac Resin