Abstract:Electrospinning as a cost-effective process to synthesize nanofiber with controlled morphology and structure has regained attention in the last decade as result of rapid advancements in nanoscale science and engineering and their applications. Although there are a few works demonstrated the ability to fabricate nano gas sensor using electrospun nanofibers as sensing materials, there are limited works to show the optimization of the sensing performance by understanding the electron transport properties and their sensing mechanism. The overall objective of this work is to electrospun conducting polymer/insulating polymer composite nanofibers (i.e., (+)- camphor-10-sulfonic acid (HCSA) doped polyanline PANI (conductive) blended with PEO (non-conductive)) with different compositions (i.e., 12 to 68 wt.%) and apply them as chemiresistive sensing material to detect ammonia at room temperature. The diameter, defects, and morphology of nanofibers were adjusted by controlling solution composition, processing parameters and their effect toward the sensing performance were also investigated. Viscosity of electrospinning solutions was found to have a pronounced impact on fiber diameter and morphology of PANI/PEO nanofibers. Diameters around 350nm of different compositions of PANI/PEO nanofibers were achieved, where decreasing solution viscosity by increasing the PANI content resulted in a morphology changing from individual fibers to junctions. Although all the compositions of PANI/PEO nanofibers show semiconducting behavior and fit a three dimensional variable hopping range model, the activation energy and hopping distance increased as the PANI content decreased. The PANI/PEO nanofibers exhibited excellent sensitivity towards NH3 with fast response and recovery times where a low detection limit of 0.5 ppm with the sensitivity of 5.6 %/ppm of NH3 was achieved from 26 wt.% PANI/PEO nanofibers. Additionally, the PANI/PEO nanofibers response toward water vapor changed from positive to negative indicating the humidity independent ammonia gas sensor can be fabricated by controlling the composition of PANI/PEO nanofibers.

Synthesis and Gas-Sensing Characteristics of Wo3 Nanofibers Via Electrospinning

Fabrication and characterization of polycrystalline WO3 nanofibers and their application for ammonia sensing

NiWO 4 Microflowers on Multi-Walled Carbon Nanotubes for High-Performance NH 3 Detection

Au-WO 3 Nanowire-Based Electrodes for NO 2 Sensing

Preparation of Hexagonal Wo3 Nanowires and Nh3 Sensing Characteristics

Synthesis of WO3 Nanorods and Their Excellent Ethanol Gas-Sensing Performance

A selective NH3 gas sensor based on Fe2O3–ZnO nanocomposites at room temperature

Pt-Cr2O3-WO3 composite nanofibers as gas sensors for ultra-high sensitive and selective xylene detection

Nanoporous Functionalized WS2/MWCNTs Nanocomposite for Trimethylamine Detection Based on Quartz Crystal Microbalance Gas Sensor

WO3 Nanosheet/W18O49 Nanowire Composites for NO2 Sensing

Synthesis and in-situ noble metal modification of WO3·0.33H2O nanorods from a tungsten-containing mineral for enhancing NH3 sensing performance

Preparation of In_2O_3 Nanwires by Sol-gel Template Technology and Their Gas Sensing Property

Preparation of Wo3 Gas Sensor and H-2-Sensing Properties

Large-Scale Hydrothermal Synthesis of Tungsten Trioxide Nanowires and Their Gas Sensing Properties

Electrospun copper-doped tungsten oxide nanowires for triethylamine gas sensing

The fabrication of In2O3 nanowire and nanotube by single nozzle electrospinning and their gas sensing property

Synthesis and Characterization of WO3 Thin Film by Spray Pyrolysis for Gas Sensing Application

Tungsten Sulfide Nanoflakes: Synthesis by Electrospinning and Their Gas Sensing Properties

Electrospun Polyaniline/Poly(ethylene oxide) Composite Nanofibers Based Gas Sensor

Self-heated WO3 nanowires for selective and sensitive detection of NO2 gas at room temperature

Effect of au doped WO3 gas sensors for NO2 detection