Abstract:Electrospinning as a cost-effective process to synthesize nanofiber with controlled morphology and structure has regained attention in the last decade as result of rapid advancements in nanoscale science and engineering and their applications. Although there are a few works demonstrated the ability to fabricate nano gas sensor using electrospun nanofibers as sensing materials, there are limited works to show the optimization of the sensing performance by understanding the electron transport properties and their sensing mechanism. The overall objective of this work is to electrospun conducting polymer/insulating polymer composite nanofibers (i.e., (+)- camphor-10-sulfonic acid (HCSA) doped polyanline PANI (conductive) blended with PEO (non-conductive)) with different compositions (i.e., 12 to 68 wt.%) and apply them as chemiresistive sensing material to detect ammonia at room temperature. The diameter, defects, and morphology of nanofibers were adjusted by controlling solution composition, processing parameters and their effect toward the sensing performance were also investigated. Viscosity of electrospinning solutions was found to have a pronounced impact on fiber diameter and morphology of PANI/PEO nanofibers. Diameters around 350nm of different compositions of PANI/PEO nanofibers were achieved, where decreasing solution viscosity by increasing the PANI content resulted in a morphology changing from individual fibers to junctions. Although all the compositions of PANI/PEO nanofibers show semiconducting behavior and fit a three dimensional variable hopping range model, the activation energy and hopping distance increased as the PANI content decreased. The PANI/PEO nanofibers exhibited excellent sensitivity towards NH3 with fast response and recovery times where a low detection limit of 0.5 ppm with the sensitivity of 5.6 %/ppm of NH3 was achieved from 26 wt.% PANI/PEO nanofibers. Additionally, the PANI/PEO nanofibers response toward water vapor changed from positive to negative indicating the humidity independent ammonia gas sensor can be fabricated by controlling the composition of PANI/PEO nanofibers.

Fabrication and characterization of polycrystalline WO3 nanofibers and their application for ammonia sensing

O2 plasma-functionalized SWCNTs and PEDOT/PSS composite film assembled by dielectrophoresis for ultrasensitive trimethylamine gas sensor.

The fabrication of In2O3 nanowire and nanotube by single nozzle electrospinning and their gas sensing property

Au-WO 3 Nanowire-Based Electrodes for NO 2 Sensing

Tungsten Sulfide Nanoflakes: Synthesis by Electrospinning and Their Gas Sensing Properties

Electrospinning Route for Α-Fe2o3 Ceramic Nanofibers and Their Gas Sensing Properties

Preparation of In_2O_3 Nanwires by Sol-gel Template Technology and Their Gas Sensing Property

Synthesis and Characterization of Tungsten Oxide Nanoscaled Fibers

WO3 Nanosheet/W18O49 Nanowire Composites for NO2 Sensing

Electrospun Polyaniline/Poly(ethylene oxide) Composite Nanofibers Based Gas Sensor

Electrospinning – A Candidate for Fabrication of Semiconducting Tungsten Oxide Nanofibers

Nanoporous Functionalized WS2/MWCNTs Nanocomposite for Trimethylamine Detection Based on Quartz Crystal Microbalance Gas Sensor

Preparation of Hexagonal Wo3 Nanowires and Nh3 Sensing Characteristics

Fabrication of Tungsten Oxide Nanowalls through HFCVD for Improved Electrochemical Detection of Methylamine

Synthesis and in-situ noble metal modification of WO3·0.33H2O nanorods from a tungsten-containing mineral for enhancing NH3 sensing performance

Large-Scale Hydrothermal Synthesis of Tungsten Trioxide Nanowires and Their Gas Sensing Properties

Polypyrrole–Tungsten Oxide Nanocomposite Fabrication through Laser-Based Techniques for an Ammonia Sensor: Achieving Room Temperature Operation

Electrospun copper-doped tungsten oxide nanowires for triethylamine gas sensing

Ammonia sensing by closely packed WO 3 microspheres with oxygen vacancies.

Controllably Fabricated Single Microwires from Pd-WO3•xH2O Nanoparticles by Femtosecond Laser for Faster Response Ammonia Sensors at Room Temperature

Electrospinning Preparation of Pd@Co3O4-ZnO Composite Nanofibers and Their Highly Enhanced VOC Sensing Properties