Abstract:Adsorption process of water on activated carbon is experimentally investigated. A heat and mass transfer model coupled with a simplified DO adsorption equilibrium equation for the adsorption of water vapor on activated carbon are developed. Numerical simulations exhibit closely align with experimental outcomes demonstrating the model's predicting applicability. In order to investigate the dynamic process of the heat and mass transfer phenomenon of water vapor on activated carbon, a fixed‐column adsorption unit and two kinds of activated carbon were used as adsorbent for water vapor adsorption under the adsorption temperature 293.15 K, 303.15 K and 313.15 K, respectively. A coupled model was developed by mass and energy balance, mass transfer and simplified DO adsorption equilibrium equation. The effects of physical parameters on heat and mass transfer were theoretically investigated. Results show that the numerical model match well with the experimental data (R2>0.993). The axial diffusion coefficient (DL) increases from 1.226×10−6 m2 s−1 to 4.062×10−6 m2 s−1 for RAC and 1.425×10−6 m2 s−1 to 4.030×10−6 m2 s−1 for MAC, mass transfer coefficient (k) increases from 8.171 s−1 to 27.083 s−1 for RAC and 9.499 s−1 to 26.864 s−1 for MAC. Concurrently, the breakthrough time of adsorption water vapor gradually shorten from 1000 s to 780 s with temperature increasing from 293.15 K to 313.15 K. The effect of axial diffusion coefficient (DL) on mass transfer is not obvious. Furthermore, the influence of the mass transfer coefficient (k) on temperature variation rate surpasses that of the internal heat transfer coefficient (h).

Study of the Performance of Activated Carbon–methanol Adsorption Systems Concerning Heat and Mass Transfer

Performance Analysis on Open Thermochemical Sorption Heat Storage from a Real Mass Transfer Perspective

DETERMINATION OF THE EFFECTIVE DIFFUSIVITIES OF ACTIVATED CARBON/METHANOL AND ACTIVATED CARBON/ETHANOL

Heat and Mass Transfer of Water During Activated Carbon Adsorption

Simulation of Heat and Mass Transfer Performance with Consolidated Composite Activated Carbon

Experimental and Numerical Investigation of Enhancement of Heat and Mass Transfer in Adsorbent Beds

Performances research on adsorption air conditioning system

Performance Study of Heat and Mass Transfer in an Adsorption Process by Numerical Simulation

The Separation of Chloromethane Mixtures and the Recovery of Dichloromethane, Chloroform and Carbon Tetrachloride by Activated Carbon Fibre

THERMODYNAMIC STUDY OF HIGH-PRESSURE ADSORPTION OF METHANE AND HEATS OF METHANE ADSORPTION ON MICROPOROUS CARBONS

Mass transfer behavior of methane in porous carbon materials

Design Principles for Synthesizing High Grade Activated Carbons for Adsorption Heat Pumps

Influence of Adsorption and Desorption Capacity on Operating Process for Adsorption Heat Pump

Experimental and Numerical Investigation into the Heat- and Mass-Transfer Processes of n -Butane Adsorption on Activated Carbon

Dynamic Simulation and Experiments of a Heat Regenerative Adsorption Heat Pump

Study of the Effects of Mass and Heat Recovery on the Performances of Activated, Carbon/Ammonia Adsorption Refrigeration Cycles

Study on the Adsorption Performance of Composite Adsorbent of Cacl2 and Expanded Graphite with Ammonia As Adsorbate

Pilot Scale Study For The Effect Of Molar Heat On So(2) Removal At High Concentrations By An Activated Carbon

Study On Heat And Mass Transfer Of Adsorbent Beds In Adsorption Refrigeration System

Thermodynamics and Regeneration Studies of CO2 Adsorption on Activated Carbon

Heat and mass transfer during H2O/CO2 adsorption separation using activated alumina