Abstract:Polyvinyl chloride (PVC) is the most widely used general flame-retardant plastic worldwide; however, the large number of plasticizers added during processing significantly reduces its flame-retardant property. To prepare a new type of PVC material with highly efficient flame retardancy and smoke suppression, antimony trioxide (Sb2O3), talc powder, hydromagnesite, and zinc borate were added in different proportions to PVC to explore the flame-retardant properties, thermal weight, smoke density (Ds), and mechanical properties of the composite materials. Results showed that the limiting oxygen index value of each group was higher than 27% after adding talc powder, magnesite, and zinc borate to replace part of the Sb2O3. This value was within the refractory-grade level and indicated a good flame retardancy performance. The replacement effect was in line with the experimental expectation. The lowest Ds peak value was 656.4 when the flame retardants were added with 10 wt% Sb2O3, 50 wt% hydromagnesite, 20 wt% talc, and 20 wt% Zn3BO6. Compared with pure Sb2O3 as a flame retardant, the Ds peak value decreased by 46.7%. The thermogravimetric decomposition temperature of the composites in each group was generally higher than that of the group with pure Sb2O3 as a flame retardant, increasing by 45.3 °C. The thermal stability of the composites was improved, and the elongation at the break and tensile strength were 234.9% and 25.8 MPa, respectively, indicating good mechanical properties. The results showed that using compound flame retardants to replace most of the Sb2O3 is an effective technique for obtaining good flame retardancy and mechanical properties of PVC. This study, not only reduced the manufacturing cost of flame-retardant PVC, but also effectively reduced its smoke density and the time to reach the highest smoke density, which provided a research reference for the application and promotion of flame-retardant PVC.

A Cone Calorimetric Study of Flame Retardance and Smoke Emission of PVC. I. the Effect of Cuprous and Molybdic Oxides*

Flame Retardation and Thermal Degradation of Intumescent Flame‐retarded Polypropylene Composites Containing Spirophosphoryldicyandiamide and Ammonium Polyphosphate

The Flame Retardancy and Smoke Suppression Performance of Polyvinyl Chloride Composites with an Efficient Flame Retardant System

Simultaneously enhanced flame retardancy and smoke suppression properties of flexible polyvinyl chloride with the incorporation of modified Mg(OH) 2 and Sb 2 O 3

Research Progress in the Fire Retardation and Smoke Inhibition of PVC

An Overview of the Flame Retardants for Poly(vinyl chloride): Recent States and Perspective †

Thermal Stability, Smoke Emission and Mechanical Properties of Poly(vinyl Chloride)/hydrotalcite Nanocomposites

Research on Fire-Retardant and Smoke-Inhibition PVC-U Formula

Influence of Nano-hydrotalcite on Thermal Stability and Smoke Density of Poly(vinyl chloride)

Study on the Suppression Mechanism of Water Mist on Poly(Methyl Methacrylate) and Poly(Vinyl Chloride) Flames

The Progress on the Study of Hydrotalcite-Modified PVC

Achieving Enhanced Fire Safety of Polyvinyl Chloride Through Rapid Catalytic Carbonization Using a Triple-effect Flame Retardant of Mg(OH)2-ZnO-TiO2

Application of cone calorimeter on TEOS/phosphoric acid flame retardant system

Correlation analysis of heat flux and cone calorimeter test data of commercial flame-retardant ethylene-propylene-diene monomer (EPDM) rubber

The Application of Transition Metal Molybdates (amoo4, A = Co, Ni, Cu) As Additives in Acrylonitrile-Butadiene-styrene with Improved Flame Retardant and Smoke Suppression Properties

Spatial-confinement Combustion Strategy Enabling Free Radicals Chemiluminescence Direct-Measurement in Flame-Retardant Mechanism

Combustion Properties of Poly(vinyl Chloride)/nano Hydrotalcite/ZnO/MgO Composites

Fire Safety Assessment of Halogen-Free Flame Retardant Polypropylene Based on Cone Calorimeter

Making polycarbonate flame retardant: Flame retardant selection and calorimetric analyses

Study on combustion property and synergistic effect of intumescent flame retardant styrene butadiene rubber with metallic oxides

Significantly suppressing CO release achieved by the catalysis effect of nanostructured rare earth/manganese oxides: Application in flame retardant thermoplastic polyurethane