Abstract:Polyvinyl chloride (PVC) is the most widely used general flame-retardant plastic worldwide; however, the large number of plasticizers added during processing significantly reduces its flame-retardant property. To prepare a new type of PVC material with highly efficient flame retardancy and smoke suppression, antimony trioxide (Sb2O3), talc powder, hydromagnesite, and zinc borate were added in different proportions to PVC to explore the flame-retardant properties, thermal weight, smoke density (Ds), and mechanical properties of the composite materials. Results showed that the limiting oxygen index value of each group was higher than 27% after adding talc powder, magnesite, and zinc borate to replace part of the Sb2O3. This value was within the refractory-grade level and indicated a good flame retardancy performance. The replacement effect was in line with the experimental expectation. The lowest Ds peak value was 656.4 when the flame retardants were added with 10 wt% Sb2O3, 50 wt% hydromagnesite, 20 wt% talc, and 20 wt% Zn3BO6. Compared with pure Sb2O3 as a flame retardant, the Ds peak value decreased by 46.7%. The thermogravimetric decomposition temperature of the composites in each group was generally higher than that of the group with pure Sb2O3 as a flame retardant, increasing by 45.3 °C. The thermal stability of the composites was improved, and the elongation at the break and tensile strength were 234.9% and 25.8 MPa, respectively, indicating good mechanical properties. The results showed that using compound flame retardants to replace most of the Sb2O3 is an effective technique for obtaining good flame retardancy and mechanical properties of PVC. This study, not only reduced the manufacturing cost of flame-retardant PVC, but also effectively reduced its smoke density and the time to reach the highest smoke density, which provided a research reference for the application and promotion of flame-retardant PVC.

Achieving Enhanced Fire Safety of Polyvinyl Chloride Through Rapid Catalytic Carbonization Using a Triple-effect Flame Retardant of Mg(OH)2-ZnO-TiO2

Hybridization of the Zinc-Based Organic Framework with Diphenylfenosundinyl Chloride and Its Combination with Hexaphenoxycyclotriphosphazene for Flame Retardancy of Epoxy Resin

Improving the flame retardancy and mechanical properties of high-density polyethylene-g-maleic anhydride with a novel organic metal phosphonate

A Novel Zinc Chelate Complex Containing Both Phosphorus and Nitrogen for Improving the Flame Retardancy of Low Density Polyethylene

The Flame Retardancy and Smoke Suppression Performance of Polyvinyl Chloride Composites with an Efficient Flame Retardant System

Synergistic Flame Retardant Properties of Polyoxymethylene with Surface Modified Intumescent Flame Retardant and Calcium Carbonate

Boosting Flame Retardancy of Polypropylene/Calcium Carbonate Composites with Inorganic Flame Retardants

Simultaneously enhanced flame retardancy and smoke suppression properties of flexible polyvinyl chloride with the incorporation of modified Mg(OH) 2 and Sb 2 O 3

Chitosan-regulated inorganic oxyacid salt flame retardants: preparation and application in PVC composites

RETRACTED ARTICLE: Preparation of Multilayers Zinc Hydroxystannate Microcapsules and its Application in Flame-Retardant PVC Composites

Synergistic Flame Retardancy of Linear Low-Density Polyethylene with Surface Modified Intumescent Flame Retardant and Zinc Borate

Enhanced Thermal Stability and Flame Retardancy of Poly(Vinyl Chloride) Based Composites by Magnesium Borate Hydrate-Mechanically Activated Lignin

Development of a UiO-66 Based Waterborne Flame-Retardant Coating for PC/ABS Material

Fabrication of highly hydrophobic layered double hydroxide decorated with tannic acid cross-linked phosphazene as a novel flame retardant for polypropylene

Effects of Modified Layered Double Hydroxides on the Thermal Degradation and Combustion Behaviors of Intumescent Flame Retardant Polyethylene Nanocomposites

Development of a Zr-Based Metal-Organic Framework (UiO-66) for a Cooperative Flame Retardant in the PC/ABS

Combustion Properties of Poly(vinyl Chloride)/nano Hydrotalcite/ZnO/MgO Composites

Utilizing the Oxidation Defects of Black Phosphorus to Reduce and Stabilize Copper(i) Molybdate to Achieve Flame Retardancy and Smoke Suppression in Polycarbonate Composites

Effect of Metallic Oxides in Polypropylene Composites Containing Melamine Phosphate and Pentaerythritol

CO2 Induced Synthesis of Zn-Al Layered Double Hydroxide Nanostructures Towards Efficiently Reducing Fire Hazards of Polymeric Materials

A Simple and Efficient Magnesium Hydroxide Modification Strategy for Flame-Retardancy Epoxy Resin