Abstract:In the past work, few study considers an effect of nanoparticle as a synergistic flame retardant on the interfacial interaction between flame retardants and polymer matrix, as well as further influence on the flame retardancy and mechanical properties of flame-retarding polymers. In this work, the electrostatic action was used to prepare a novel ammonium polyphosphate@layered double hydroxide (APP@LDH) in which the LDH nanoparticles accumulated at the surface of APP to achieve the highly-efficient synergistic action of LDH in thermoplastic polyurethane/APP (TPU/APP) and reduce the deterioration of APP to mechanical properties of TPU. Scanning electron microscope, etc., demonstrated that the APP@LDH was prepared successfully. Combustion tests results showed that the APP@LDH had much higher flame retarding efficiency than the APP/LDH which was prepared through a simple physical blending process. Only 1.0 wt% LDH made the TPU pass the V-0 rating with no dripping in the UL-94 test and a limiting oxygen index (LOI) of 29.2% in the case of 7.0 wt% APP@LDH. However, the TPU/APP/LDH with 1.0 wt% LDH did not pass the V-0 rating, and a dripping behavior also existed at 7.0 wt% APP/LDH. In cone calorimeter test, the heat release and smoke production of TPU/APP@LDH were also lower than the corresponding values of TPU/APP/LDH under equal amount of LDH. The analysis of flame-retardant mechanism proved that an enhanced condensed action induced by the interfacial LDH dominated the better flame retardance of APP@LDH system than that of APP/LDH system. Another important aspect is that the mechanical properties of APP@LDH system showed remarkable improvements in comparison with those of APP/LDH system. The tensile strength of TPU with 7.0 wt% APP@LDH was 32.5% higher than that of TPU with 7.0 wt% APP/LDH under equal 1.0 wt% LDH. Meanwhile, the elongation at break for the former was maintained at 863.0%, almost equal to that of TPU. This work illustrates that the interfacial accumulation of LDH may enhance its synergistic flame-retarding efficiency and meanwhile achieve the mechanical enhancement for TPU/APP. (C) 2019 Elsevier Ltd. All rights reserved.

Fabrication of highly hydrophobic layered double hydroxide decorated with tannic acid cross-linked phosphazene as a novel flame retardant for polypropylene

A Novel Halogen‐free Intumescent Flame Retardant Containing Phosphorus and Nitrogen and Its Application in Polypropylene Systems

The preparation of layered double hydroxide wrapped with triazine-based organic framework to enhance the flame retardancy for polypropylene

Construction of hydrophobic core-shell flame retardant: A novel strategy towards reducing fire hazards and reinforcing mechanical properties of polypropylene

Novel Bio-Based Lignosulfonate and Ni(OH)2 Nanosheets Dual Modified Layered Double Hydroxide As an Eco-Friendly Flame Retardant for Polypropylene

Fabrication of green alginate-based and layered double hydroxides flame retardant for enhancing the fire retardancy properties of polypropylene

Renewable lignin-based surfactant modified layered double hydroxide and its application in polypropylene as flame retardant and smoke suppression

Effect of phytic acid-modified layered double hydroxide on flammability and mechanical properties of intumescent flame retardant polypropylene system

Electrostatic Action Induced Interfacial Accumulation of Layered Double Hydroxides Towards Highly Efficient Flame Retardance and Mechanical Enhancement of Thermoplastic Polyurethane/ammonium Polyphosphate

Effect of modified layered double hydroxide on the flammability of intumescent flame retardant PP nanocomposites

Construction of a hydrophobicity, phosphorus‐ and nitrogen‐containing layered double hydroxides‐based synergistic effect flame retardant for poly (lactic acid)

Intercalation of a Novel Containing Nitrogen and Sulfur Anion into Hydrotalcite and Its Highly Efficient Flame Retardant Performance for Polypropylene

In-situ co-precipitation synthesis of Zn/Fe-LDH modified melamine polyphosphate for enhanced flame retardancy in polypropylene

Synergistic Effects of Layered Double Hydroxide with Phosphorus-Nitrogen Intumescent Flame Retardant in PP/EPDM/IFR/LDH Nanocomposites

Effects of Modified Layered Double Hydroxides on the Thermal Degradation and Combustion Behaviors of Intumescent Flame Retardant Polyethylene Nanocomposites

Hyperbranched Phosphorus/nitrogen-Containing Polymer in Combination with Ammonium Polyphosphate As a Novel Flame Retardant System for Polypropylene

Novel Ultrathin Layered Double Hydroxide Nanosheets with In Situ Formed Oxidized Phosphorus as Anions for Simultaneous Fire Resistance and Mechanical Enhancement of Thermoplastic Polyurethane

Synthesis of Organo Cobalt-Aluminum Layered Double Hydroxide Via a Novel Single-Step Self-Assembling Method and Its Use As Flame Retardant Nanofiller in PP.

Preparation and Properties of Multilayer Core-Shell Structure Ammonium Polyphosphate Synergistic with THEIC for Flame Retardant LDPE

Nickel‐Aluminum Hydrotalcite for Improving Flame Retardancy and Smoke Suppression of Intumescent Flame Retardant Polypropylene: Preparation, Synergy, and Mechanism Study

Bio-based adenosine triphosphate pillared layered double hydroxide for enhancing flame retardancy of polypropylene