Abstract:The tensile strain dependences of the critical current (Ic) in YBa2Cu3O7?? (YBCO) coated conductors fabricated by using the rolling-assisted biaxially textured Ni?W substrates (RABiTS)?pulsed laser deposition (PLD) method were examined at 77?K and in self magnetic field. Cu and stainless steel layers were used as stabilizers to the YBCO coated conductor, and the effects of stabilizing layers on the strain tolerance of Ic were investigated, compared with the case without a stabilizing layer. The lamination of stabilizer produced an increase in the yield strength and strain tolerance of Ic in coated conductors. All YBCO coated conductors tested showed a reversible strain effect and a peak in the relation between Ic and applied strain. The peak strain of Ic and the irreversible strains for Ic degradation were enhanced when the YBCO coated conductor was laminated with a stabilizing layer. For the case laminated with a stainless steel layer, Ic recovered reversibly until the applied strain reached to about 0.5% and showed its peak at a strain of 0.42%, comparing to the case without a stabilizing layer, which were 0.21% and 0.18%, respectively. It can be predicted that the lamination of a stabilizing layer produced a significant residual compressive strain to the YBCO film during cooling to 77?K, which influenced the axial strain tolerance of YBCO coated conductors. Therefore, the Ic?tensile strain relation in YBCO coated conductors could be explained by a two-stage deformation; stage I is the region where YBCO film behaves elastically and Ic recovers when the stress is released. Stage II is the region where Ic decreases irreversibly attributable to the cracking induced in the YBCO film due to the significant plastic deformation of the substrate or the stabilizing layer.

Effect of processing conditions and methods on residual stress in CeO2 buffer layers and YBCO superconducting films

Surface characterization of as-grown CeO2 cap layer morphology evolution and critical current density of post-deposited YBCO films

Interaction of YBCO Thin Film and Substrates and Its Effects on the Quality of the Film

Strain Evolution and Morphological Transition of Magnetron-Sputtered CeO2 Thin Films Induced by Deposition Parameters

Properties of YBa$_2$Cu$_3$O$_{7-δ}$ films grown by pulsed laser deposition on CeO$_2$-buffered sapphire

Preparation of high crystalline YBCO superconducting thin films by PLD

Studies of high temperature superconducting thin films by transmission electron microscopy

The Effect Of Laser Energy Density And Target-Substrate Distance On The Quality Of Ybalcu3o7-X Thin-Films

Surface Morphology Evolution of CeO2/YSZ (001) Buffer Layers Fabricated Via Magnetron Sputtering

Enhancing Superconductivity of Ultrathin YBa2Cu3O7-δ Films by Capping Non-Superconducting Oxides*

Enhancing superconductivity of ultrathin YBa<sub>2</sub>Cu<sub>3</sub>O<sub>7-δ</sub> films by capping non-superconducting oxides*

Substrate effect on thermal stability of superconductor thin films in the peritectic melting

Substrate temperature dependence of the texture quality in YBCO thin films fabricated by on-axis pulsed-laser ablation

Epitaxial growth of YBCO thin films on LaAlO3 substrate with CeO2 buffer layer

The strain effect on critical current in YBCO coated conductors with different stabilizing layers

Preparation and Critical-Current Measurements of Laser-Ablated Ybco Superconducting Thin-Films

Effect of Fired Temperature on Microstructure and Superconductivity of MOD-YBCO Thin Films

Preparation and Texture Evolution of Epitaxially Grown CeO2 Buffer Layers Using Inorganic Salts As Starting Materials for YBCO Coated Conductors

Preparation and Crystalline Qualities of SrTiO3 and CeO2 Buffer Layers Fabricated on Ni Substrates Via a Sol–gel Method for YBCO Coated Conductors

Fabrication And Analysis Of Tri-Layer Yba2cu3 O (7-Delta) Thick Films By Low-Fluorine Mod Method

Fabrication and Analysis of Tri-layer YBa 2 Cu 3 O 7− δ Thick Films by Low-Fluorine MOD Method