Abstract:In this work, the formation of laser-induced periodic surface structures (LIPSS) on the surfaces of thin films of poly(ethylene terephthalate) (PET) and PET reinforced with expanded graphite (EG) was studied. Laser irradiation was carried out by ultraviolet (265 nm) and near-infrared (795 nm) femtosecond laser pulses, and LIPSS were formed in both materials. In all cases, LIPSS had a period close to the irradiation wavelength and were formed parallel to the polarization of the laser beam, although, in the case of UV irradiation, differences in the formation range were observed due to the different thermal properties of the neat polymer in comparison to the composite. To monitor the modification of the physicochemical properties of the surfaces after irradiation as a function of the laser wavelength and of the presence of the filler, different techniques were used. Contact angle measurements were carried out using different reference liquids to measure the wettability and the solid surface free energies. The initially hydrophilic surfaces became more hydrophilic after ultraviolet irradiation, while they evolved to become hydrophobic under near-infrared laser irradiation. The values of the surface free energy components showed changes after nanostructuring, mainly in the polar component. Additionally, for UV-irradiated surfaces, adhesion, determined by the colloidal probe technique, increased, while, for NIR irradiation, adhesion decreased. Finally, nanomechanical properties were measured by the PeakForce Quantitative Nanomechanical Mapping method, obtaining maps of elastic modulus, adhesion, and deformation. The results showed an increase in the elastic modulus in the PET/EG, confirming the reinforcing action of the EG in the polymer matrix. Additionally, an increase in the elastic modulus was observed after LIPSS formation.

Effect of irradiation history on the preparation of laser induced periodic microstructure on polyimide surface

Laser ablation behavior and mechanism of polyimide by UV irradiation

Preparation and Characterization of Anisotropic Chain Structures in Polyimide Films

Thermal Influence on Excimer-Laser-induced Electrical Conductivity on Polyimide Film Surfaces

Study on the ultraviolet nanosecond laser ablation and heat-affected zone of polydimethylsiloxane films based on comprehensive surface analysis

Mechanism for self-formation of periodic structures on a plastic polymer surface using a nanosecond and femtosecond laser pulses

Physicochemical Modifications on Thin Films of Poly(Ethylene Terephthalate) and Its Nanocomposite with Expanded Graphite Nanostructured by Ultraviolet and Infrared Femtosecond Laser Irradiation

Mechanism and Behavior of Laser Irradiation on Carbon Fiber Reinforced Polyetheretherketone (CF/PEEK) During the Laser-Assisted In-Situ Consolidation Additive Manufacturing Process

Infrared Pulsed Picosecond Laser-Induced Plasma-Assisted Ablation of Micro-textures on Quartz Surface

Laser-induced surface structures at polymer surfaces irradiated by ns-UV-laser in water confinement and in air

Laser‐Induced Reversible and Irreversible Surface Nanostructuring

Structural Studies of Excimer Laser-Induced Percolative Phase Transition on Polyimide Thin Film Surfaces

Laser induced thermal effect on the polymerization behavior in up-conversion particle assisted near-infrared photopolymerization.

Modification and activation of the surface of medical-grade PDMS after irradiation by ultrashort laser pulses

The ablation threshold and incubation effect in picosecond laser surface treatment of CFRP

Fabrication of microstructures by picosecond laser

Formation of Deep-Subwavelength Structures on Organic Materials by Femtosecond Laser Ablation

Effects of Electron Irradiation and Temperature on Mechanical Properties of Polyimide Film

Polymer surface reactivity enhancement by ultraviolet ArF laser irradiation: An x‐ray photoelectron spectroscopy study of polytetrafluoroethylene and polyethyleneterepthalate ultraviolet treated surfaces

Tailoring Sub-micrometer Periodic Surface Structures via Ultrashort Pulsed Direct Laser Interference Patterning

Laser lift-off of polyimide thin-film from glass carrier using DPSS laser pulses of top-hat square profiles