Abstract:Due to its high bonding energy and low self-diffusion coefficient, silicon nitride (Si3N4) ceramics cannot form a dense structure with prolonged high-temperature insulation or by raising the sintering temperature. To improve the density of the sintered Si3N4 ceramics, additives are added to promote the rearrangement–dissolution–precipitation process of the crystal grains. However, the liquid phase formation temperature of different sintering aid chemical compositions varies, making it challenging to isolate the mechanism and the effect of liquid phase formation temperatures on sintering. Hence, we developed three sintering aids, namely Y2O3-Al2O3 (YA), Y2Si2O7 (Y2S), and Y2Si2O7-Al6Si2O13 (Y2SM), with homologous elements and different liquid phase formation temperatures. These sintering aids can form a liquid phase with SiO2 on the surface of Si3N4 at varying temperatures. We analyzed the sintered Si3N4 ceramic's density, volume shrinkage rate, and microstructure to verify the YA's lower liquid phase formation temperature effect, providing more rearrangement time and increasing sintering density. Conversely, sintering aids with too low liquid phase formation temperatures are more prone to volatilize during high-temperature sintering stages, thereby reducing sintering density. This research found that different liquid phase formation temperatures do not affect the α→β phase transition temperature of Si3N4 ceramics. We also evaluated the Y2S sintering aid contents' effect on Si3N4 ceramics sintering. The results revealed that aiding sintering with too little Y2S content is insufficient for liquid phase production, and hence does not improve sintering density. Conversely, excessive liquid phase can improve density and refine grain size but increases weight loss rate during sintering due to volatilization.

Internal Friction Study of Sialon Ceramics

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Sintering Behavior, Microstructure and Mechanical Properties of Various Fluorine-Containing Y-SiAlON Glass-Ceramics

Abrasive wear behavior of Sialon ceramic

Influence of Stabilizing Ions and Sintering Process on the Thermal Conductivity of Α‐sialon Ceramics

Sintering And Mechanical Properties Of Aln-Rich Ceramics In The Sic-Aln System

Study Of The Comparative Effect Of Sintering Methods And Sintering Additives On The Microstructure And Performance Of Si3n4 Ceramic

Tribological Behavior of Liquid Phase Sintered SiC Ceramics Under Dry Condition

Effect of atmosphere and sintering time on the microstructure and mechanical properties at high temperatures of $α$-SiC sintered with liquid phase Y$_2$O$_3$ and Al$_2$O$_3$

Effects of additives to Si3N4 matrix on microstructure and properties of laminated Si3N4/BN ceramics

Effect of annealing treatments on microstructure and mechanical properties of liquid-phase-sintered silicon carbide

RESEARCH PROGRESS OF SELF-REINFORCED Α - SIALON CERAMICS

Effects of mechanically alloying Al2O3 and Y2O3 additives on the liquid phase sintering behavior and properties of SiC

Preparation, structure and mechanical properties of Sialon ceramics by transition metal-catalyzed nitriding reaction

Microstructure and high temperature mechanical properties of liquid-phase-sintered $α$-SiC with Y$_2$O$_3$-Al$_2$O$_3$ additions

Microstructure and Room-Temperature Mechanical Properties of Β Sialon/sic Nanocomposites

Effects of crystallization of inter-granular glassy phase on the mechanical performance of alumina ceramics

Internal Friction Study of Neodymium-Modified Bismuth Titanate Ceramic

A Study on the Effects of Liquid Phase Formation Temperature and the Content of Sintering Aids on the Sintering of Silicon Nitride Ceramics

Study on Thermal Conductivity of Spark-Plasma-Sintered Silicon Nitride Ceramics

Microstructural evolution and enhanced mechanical properties of 95Al2O3–Yb/Mg/Si ceramics by optimizing sintering temperature