Abstract:The influence that the atmosphere (N_2 or Ar) and sintering time have on microstructure evolution in liquid-phase-sintered alpha-sic and on its mechanical properties at high temperature was investigated. The microstructure of the samples sintered in N2 was equiaxed with a grain size of 0.70 {\mu}m and a density of 98% of the theoretical value regardless of the sintering time. In contrast, samples sintered in Ar had an elongated-grain microstructure with a density decreasing from 99% to 95% and a grain size increasing from 0.64 to 1.61 {\mu}m as the sintering time increased from 1 to 7 hours. The mechanical behaviour at 1450 °C showed the samples sintered in nitrogen to be brittle and fail at very low strains, with a fracture stress increasing from 400 to 800 MPa as the sintering time increased. In contrast, the samples sintered in Ar were quasi-ductile with increasing strain to failure as the sintering time increased, and a fracture stress strongly linked to the form and size of the grains. These differences in the mechanical properties of the two materials are discussed in the text. During mechanical tests, a loss of intergranular phase takes place in a region, between 50 and 150 {\mu}m thick, close to the surface of the samples--the effect being more important in the samples sintered in Ar

Effect of annealing treatments on microstructure and mechanical properties of liquid-phase-sintered silicon carbide

The Effect of Annealing Temperature on Micro-Structure and Mechanical Properties of C/Sic Composites

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Microstructure And Mechanical Properties Of The Alpha-Sialon/Alpha-Sic Composites: Effects Of Heat Treatment

Microstructure and mechanical properties of the α-SiAlON/α-SiC composites: Effects of heat treatment

Effect of Silicon Addition and Thermal History on the Thermal Expansion Behavior of Sic/Al Composites

Effects of Composition and Thermal Annealing on the Mechanical Properties of Silicon Oxycarbide Films

Effect of Annealing Conditions on Microstructural Development and Phase Transformation in Silicon Carbide

Microstructures and properties of in situ lamellar Al4SiC4 bonded SiC bricks: The effect of induction heating

Effect of atmosphere and sintering time on the microstructure and mechanical properties at high temperatures of $α$-SiC sintered with liquid phase Y$_2$O$_3$ and Al$_2$O$_3$

Effects of MgSiN2 Addition and Post-Annealing on Mechanical and Thermal Properties of Si3N4 Ceramics

Microstructural Evolution in Cold-Rolled Squeeze-Cast Sicw/Al Composites During Annealing

The effect of aluminum additive on pressureless sintering of SiC

Fabrication, Microstructure, and Properties of SiC/Al 4 SiC 4 Multiphase Ceramics Via an In-Situ Formed Liquid Phase Sintering

Sintering Behavior, Microstructure and Mechanical Properties of Silicon Carbide Ceramics Containing Different Nano-Tin Additive

Microstructure and high temperature mechanical properties of liquid-phase-sintered $α$-SiC with Y$_2$O$_3$-Al$_2$O$_3$ additions

Aqueous Processing, Hot-Pressing and Mechanical Properties of Silicon Carbide with Al2O3 and Y2O3

Effects of processing parameters and post-process heat treatment on selective laser melted SiC/AlSi10Mg composites

Study on the Performance for Silicon Carbide Ceramics by Hot-pressing Sintering

Influence of Annealing on Mechanical Properties of Al-20Si Processed by Selective Laser Melting

Phase-Separation and Toughening of Sic Ain Solid-Solution Ceramics