Abstract:With the advent and development of power semiconductor switches like IGBT or MOSFET, high-speed switching devices have sprung up and sped up dynastic response of converters. However, these devices in operation will produce very large dv/dt and di/dt, which result in sever electromagnetic interference(EMI). In a variable-frequency drive(VFD) system, due to the coupling common-mode(CM) noise, communication between programmable logic controller(PLC) and VFD will be affected by CM current at the motor side if communication cables get too close to the motor ones. This paper emphatically analyzes the effect of common-mode interference on communication performance of a motor drive system. It introduces the generation mechanism of CM voltage and current at the motor side in a VFD system first and briefly illustrates how it couples to the communication cables. At the same time, some certain influence factors of CM current in communication system are respectively explained. Then it elaborates the detailed mechanism how CM current on communication cables affects the error rate which is employed to evaluate the communication quality. Besides, the numerical relationship between CM current on communication cables and the error rate is also discussed and confirmed by series of experiments. Finally, some software or hardware solutions are put forward to achieve the aim of interference suppression and decreasing the error rate when CM current on communication cables is constant.

The VVVF Timing of Multi Asynchronous Motors Based on PLC Network

The host-control system development of logistics control device based on PLC

Design and Accomplishment of VVVF Drive System Based on Network Control

Evaluation of Communication Error Rate Induced by Common-mode Interference of a Motor Drive System

Design of TCP/IP Network Communication between Host Computer and PLC Based on Serial Server

Implementation of Serial Communication between PLC and Single-chip Microcomputer

Solutions for PLC Intelligent Industrial-Control Network Based on TTE

The Design and Realization of PLC Remote Monitoring and Diagnosing System

Modeling and Realization of Multiphase Permanent Magnet Synchronous Motor Variable Speed System

Study on the Real-Time Serial Communication Based on Windows

The Communication Design of PLC Industrial Control System Based on VB and Mitsubishi Programming Interface Protocol

Design of Communication Among Vision System, PLC and Industrial Robot based on Modbus-TCP protocol

The implementation and application of programming port communication between industry PC and Mitsubishi FX series PLC

Application of PLC Communication in Transformation of Electric Control System of 4m Vertical Lathe

Effect of Common-Mode Interference on Communication Performance of a Motor Drive System

The Design and Development of OMRON Multi-PLC Control System Based on Multi-Net

The Remote Fan Control Based on Real-Time Ethernet

Remote Closeloop Feedback Control of Step-Motor Based on Communication Between PLC

Communication Between PC and PLC Based on FX Programme Port

Design of Multi-speed Motor Control System Based on S7-1200 PLC and Frequency Converter

Control and communication of a multi-motor system based on LAN