Abstract:The self-pressurization process of cryogenic propellant storage under a normal gravity condition often involves turbulent mixing in the liquid region and complex flow fields in the vapor region caused by heat leak into a cryogenic tank. Over time, the cryogenic tank pressurizes due to a temperature increase in the vapor phase and the heat and mass transfer across the liquid-vapor interface. A nodal simulation approach was employed to study the long term transients of tank self-pressurization. In this paper, mechanistic models and correlations were implemented to simulate the self-pressurization of Multipurpose Hydrogen Test Bed experiments with a commercial nodal code, namely, Systems Improved Numerical Differencing Analyzer with Fluid Integrator (SINDA/FLUINT). A lump number sensitivity study on the prediction of tank pressure and temperature was performed to determine the number of lumps appropriate for a 50% initial liquid fill level. Uniform heat flux boundary conditions were implemented on both phases during the tank self-pressurization with an estimated heat leak provided by NASA. Numerical simulation showed that the predicted pressure profiles of the 50% and 90% fill level cases agreed well with experimental data. In the liquid region, temperatures were primarily uniform and close to saturation due to turbulent natural convection mixing. Findings show the current model overestimates the temperature profiles in the vapor region when assuming heat conduction transfer.

Numerical Simulation of Liquefied Gas Self-Pressurization for Small Spacecraft Propulsion Systems

Experimental study of self-pressurizing transfer system for cryogenic liquid

Modeling and Simulation of Cryogenic Propellant Tank Pressurization in Normal Gravity

Numerical Simulation on Interface Evolution and Pressurization Behaviors in Cryogenic Propellant Tank on Orbit

Simulation of heat transfer and mass transfer in cryogenic propellant tank pressurization process

Appropriate Formulations for Velocity and Pressure Calculations at Gas-liquid Interface with Collocated Variable Arrangement

Numerical Simulation of Sloshing in the Propellant Tank of Reusable Rocket Vehicle Using Meshfree Method

Numerical Simulation of Vapor Configuration and Bubbles Coalescence in Cryogenic Propellant Tank under Microgravity

Numerical simulation of cold helium filling procedure and pressurization system of oxygen tank

Numerical Simulation of Wall Liquid Film in Small Bipropellant Rocket Engine

Numerical simulation of three-dimensional flow in combustion chamber of solid propellant rocket engine

Numerical simulation of gas leakage in manned spacecraft cabin

Numerical analysis of pre-cooling and priming transients in cryogenic propellant feed systems

Finite Element Analysis of Propellants Slosh in Spherical Tank under Micro Gravity

Dynamic Modeling and Analysis of LNG Fuel Tank Pressurization under Marine Conditions

Numerical Study on Pressure Variation of Marine Liquefied Natural Gas (LNG) Fuel Tanks under Sinusoidal Sloshing Excitation

Numerical simulation of reacting flow and fuel regression rate in N 2O/htpb hybrid rocket motor

Numerical Simulation Of The Gas Dynamics Of Nitrogen Jets Exhausting Into A Rarefied Space

Three-dimensional numerical simulation of liquid sloshing in spacecraft containers in low-gravity environments

Three-dimensional Numerical Simulation of Cryogenic Cavitating Flows of Liquid Nitrogen Around Hydrofoil

Numerical Investigation of Gas Models for Retropropulsion Flows for Future Mars Missions