Abstract:For applications in optics, energy storage, and semiconductors etc., spherical non-aggregated particles are desired for better flowability, molding capability and homogeneous densification. Spray flame synthesis has attracted widespread attention with its excellent ability for atomic-level mixing/doping and good potential for scale-up production. However, spray flame synthesis usually produces aggregates due to the known collision-coalescence growth. In this paper, we propose a two-step strategy of suspension-fed spray-flame synthesis. The first step involves the synthesis of aggregated nanoparticles, followed by a second step where these aggregates are reconstructed into spherical non-aggregated particles while retaining the advantage of atomic-level homogeneous mixing. It is found that for aggregated Y2O3 nanoparticles, the critical point for reconstructing into spherical particles occurs when the flame temperature exceeds the melting point. The spherical particle size increases with the solid concentration of the suspension by a power of about 0.28. Assuming that droplets do not undergo micro-explosions and instead follow a one droplet to one particle route results in an overestimation of particle size by a factor of 6 to 8. This discrepancy suggests that micro-explosions may play certain role in the new suspension-fed flame synthesis, and largely reduces the final particle size. Furthermore, the Al2O3-Y2O3 and MgO-Y2O3 particles are selected for the multicomponent suspension-fed synthesis, representing the miscible and immiscible systems, respectively. The results show that for the Al2O3-Y2O3 system, uniformly mixed spherical non-aggregated particles are obtained. For the MgO-Y2O3 system, both composite spherical particles with pinning structure and MgO nanoparticles are identified, indicating that for obtaining spherical multi-component non-aggregated particles, the flame temperature needs to be higher than not only the eutectic component's melting point but also any single component's melting point. Overall, suspension-fed spray flame synthesis opens up a new pathway for the low-cost industrial-scale production of spherical non-aggregated multi-component particles.

Suspension combustion synthesized SiO2 and its spherical shaping mechanism

Floating combustion synthesis of spherical vitreous silica nano-powder

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

In‐situ combustion synthesis of spherical Si@Si3N4 granules

Studies of synthesizing the SiC nanometer powders by chemical vapor reaction

Preparations of SiS and SiO2 nanospheres

Synthesis of Spherical Si3N4 Powders by Liquid‐phase Modified Carbothermal Reduction and Nitridation

In situ combustion synthesis of spherical Si@Si<sub>3</sub>N<sub>4</sub> granules

Preparation of hollow SiC spheres by combustion synthesis

A Two-Step Strategy for Production of Spherical Non-Aggregated Multi-Component Particles by Suspension-Fed Spray Flame

Synthesis of spherical SiO2 powders from water glass and colloidal Sol through ultrasonic spray pyrolysis

Preparations and Characterizations of New Mesoporous ZrO2 and Y2O3-stabilized ZrO2 Spherical Powders

In‐situ combustion synthesis of spherical Si@Si <sub>3</sub> N <sub>4</sub> granules

Crystal Growth In The Combustion Synthesis Of -Si3n4 Using Si With Different Particle Sizes

Oxidation Behavior of Β-Sialon Powders Fabricated by Combustion Synthesis

Fabrication of yttrium-stabilized α -SiAlON powders with rod-like crystals by combustion synthesis

Preparation of Y-SiAlON rod-like crystals and whiskers by combustion synthesis

Combustion synthesis of rod-like Yb alpha-sialon powders

Novel rod-like yttrium α-sialon crystalline powders prepared by combustion synthesis

Preparation, Characterization and Catalytic Activity for Co Oxidation of Sio2 Hollow Spheres Supporting Cuo Catalysts

Combustion synthesis of α-Si3N4 powders using in-situ nano-SiO2 coated Si and Si3N4 reactants