Preparation of Zeolite X Membrane on Porous Stainless Steel Substrate
XU Zhongqiang,CHEN Qingling,LU Guanzhong,MA Yi-Hua
DOI: https://doi.org/10.3321/j.issn:0253-9837.2000.02.016
IF: 16.5
2000-01-01
Chinese Journal of Catalysis
Abstract:Porous stainless steel (PSS) tubes have a property of high strength, and are easy to be equipped as a membrane module. In this paper, a method for zeolite X growing on the surface of PSS cylinder on the basis of the classic synthesis has been developed. The recipe of crystallization solution for synthesis of zeolite X membrane is (1 3~6 0)Na 2O SiO 2 (0 20~0 33)Al 2O 3 (120~500)H 2O, the crystallization temperature is 85~100 ℃, and the crystallization time is 40~84 h. Instead of ceramic ones, PSS substrate can not release aluminium ion in in situ synthesis, therefore, the composition of synthesis solution can be controlled by the starting recipe. It is especially important when the zeolite membranes with high ratio of Si/Al are needed. The experimental results indicated that a continuous and crackfree toplayer of zeolite X membrane with a thickness of 5~20 μm can be grown on PSS tubes by 4 coating times and more, and the morphology of toplayer on the substrate depends on the recipe of coating solution, crystallization condition, coating times and pore size of the substrate. The permeance of pure He and N 2 through zeolite X/PSS decreased to 0 03%~0 50%, compared with that through PSS. n Butane, i butane and neopentane have nearly the same permeance of 13 nmol/(m 2·s·Pa) at 25 ℃, showing no preferential permeation to n butane. And further, the ratio of permeance of (C 4H 9) 3N to (C 4F 9) 3N reaches up to 57 3 at 350 ℃ after 6 coating times. It is indicated that there still exist non zeolite apertures as gas pathways on the toplayer of zeolite X/PSS.