Abstract:The deterioration process and deterioration mechanism of magnesium oxychloride cement (MOC) in an alkaline environment were studied using a scanning electron microscope (SEM), an X-ray diffractometer (XRD), a Fourier transform infrared spectrometer (FT-IR) and a micro-electro-hydraulic servo pressure testing machine to investigate the effects of soaking time in 10 wt.% NaOH solution on the macro- and micro-morphology, phase composition and compressive strength of MOC samples. The results show that the deterioration of MOC samples under an alkaline environment is mainly caused by the alkaline environment providing more OH- ions, which can react with 5Mg(OH)2·MgCl2·8H2O (P 5) in the sample. The resulting reaction gives rise to a faster decomposition of 5Mg(OH)2·MgCl2·8H2O (P 5) and a substantial reduction in the strength of the sample, and finally leads to a gradual deterioration of MOC samples. Meanwhile, immersion time exhibits a significant effect on MOC samples. The extension of immersion time coincides with more OH- ions entering the sample, and the greater presence of OH ions increases the likelihood that more P 5 will produce a hydrolysis reaction, further resulting in the increased deterioration of the sample. After soaking for 6 h in alkaline media, the main phase composition of the surface layer of an MOC sample changes to MgO and Mg(OH)2, and its microscopic morphology is also dominated by round sheets, giving rise to a sharp decrease in its compressive strength (52.2%). When the immersion time is prolonged to 72 h, OH- ions have already immersed into the inner core of the sample, causing the disappearance of P 5 from the whole sample. At the same time, both the surface and inner core of the sample exhibit a disc-shaped morphology, and chalking phenomena also appear on the surface of the sample. This reduces the compressive strength of the sample to 13.5 MPa, only 20% of its compressive strength in water. The compressive strength of the sample after 120 h of immersion is as low as 8.6 MPa, which is lower than that of the sample dipped in water for 21 days (9.5 MPa). As a result, the MOC samples studied in alkaline environments exhibit a faster deterioration rate, mainly because of a faster hydrolysis reaction by P 5, caused by more OH- ions.

Degradation Behavior of Pure Magnesium Immersed in Different Corrosive Media

Biodegradation of Az31 and We43 Magnesium Alloys in Simulated Body Fluid

Corrosion behavior of biomedical AZ91 magnesium alloy in simulated body fluids

Influence of Aggressive Ions on the Degradation Behavior of Biomedical Magnesium Alloy in Physiological Environment

Corrosion Products on Biomedical Magnesium Alloy Soaked in Simulated Body Fluids

Degradation Behavior Of Micro-Arc Oxidized Zk60 Magnesium Alloy In A Simulated Body Fluid

Degradation Mechanisms of Chloride Contaminated Cast-in-Situ Concrete Partially Exposed to Magnesium-Sulfate Combined Environment

Magnesium degradation influenced by buffering salts in concentrations typical of in vitro and in vivo models

The Corrosion Behavior of AZ91D Magnesium Alloy in Simulated Haze Aqueous Solution

Preparing Ca-P Coating on Biodegradable Magnesium Alloy by Hydrothermal Method: in Vitro Degradation Behavior

The Effects of ECAP, Mn and Ca Elements on the Microstructure and Corrosion Properties of Magnesium Alloys Were Investigated

CORROSION BEHAVIOR OF PURE MAGNESIUM IN NEUTRAL 1.0mass. % NaCI SOLUTIONS

Corrosion behavior of magnesium in aqueous sulfate-containing electrolytes

Exploring the degradation behavior of MgXAg alloys by in vitro electrochemical methods

Comparative Studies on Degradation Behavior of Pure Zinc in Various Simulated Body Fluids

Unveiling the Effect of Grain Size on Biodegradation of Magnesium

In Vivo Simulation of Magnesium Degradability Using a New Fluid Dynamic Bench Testing Approach

Study on the Deterioration Mechanism of Magnesium Oxychloride Cement under an Alkaline Environment

Influence of Heat Treatment on Degradation Behavior of Bio-Degradable Die-Cast AZ63 Magnesium Alloy in Simulated Body Fluid

Corrosion Behavior of Pure Mg Based on Generation/Collection and Feedback Modes of Scanning Electrochemical Microscopy

Corrosion Activity of Ultrafine-Grained Pure Magnesium and ZK60 Magnesium Alloy in Phosphate Buffered Saline Solution