Design of Rear Column Cornice of Vehicle Body

Zhao Yunmei,Zhao Fuquan

DOI: https://doi.org/10.3969/j.issn.1673-3142.2011.03.015

2011-01-01

Abstract:The design of rear column cornice structure of vehicle body is mainly introduced,as well as some structure and technology to prevent rain entering the vehicle body.Some attention points in design of cornice and the design plan to ensure their appearance are analyzed.

What problem does this paper attempt to address?

Analysis of Automobile Body Structure and Monocoque Body Welding Technology

Xiang Liu

DOI: https://doi.org/10.1088/1742-6596/1852/4/042063

2021-04-01

Journal of Physics: Conference Series

Abstract:Abstract Is the main purpose of the car body by passenger, cargo, safely and reliably protect passengers and cargo from wind, sand, rain, snow, etc., constitute a good air mechanics environment, body should guarantee reasonable structure, beautiful shape, color coordination, and can effectively reduce the car’s fuel consumption, air resistance and ensure the car driving stability and cooling condition of the engine, ensure the car ventilation, etc. The body parts mainly include body shell, surface meal gold, freight car and cab, door, window, frame and so on. The automobile body structure can be divided into three types: non-bearing, semi-bearing and bearing. There are many kinds of welding methods commonly used in body maintenance, and it is of great significance to research and formulate the welding repair process for body.
Structure Design of Dash-Panel Upper Assembly on a Vehicle

GUO Wen-zhi,LI Guo-lin,LI Hong-hua,ZHAO Fu-quan

DOI: https://doi.org/10.3969/j.issn.1673-3142.2012.09.003

2012-01-01

Abstract:The exterior styling of an automobile usually brings visually aesthetic feeling and sense of achievement to customers or users.However,a bodywork interior structure is not always emphasized.As a matter of fact,the bodywork interior structure has an important position in a vehicle,and is necessarily an integral part as well.The dash-panel upper assembly is one of the most important integral parts in the bodywork system.It plays an important role in bodywork torsional stiffness assurance,cockpit environment improvement,and safety increase during the collision.The structural form,function,design considerations,and important role in the bodywork are particularly discussed in respect of dash-panel upper assembly in this paper.Furthermore,the basic design process of dash-panel upper assembly is also introduced.
Structure Design of Deflector Channel of an Automotive Body

Guo Wenzhi,Li Honghua,Zhao Fuquan

DOI: https://doi.org/10.3969/j.issn.1673-3142.2012.02.010

2012-01-01

Abstract:Two different kinds of deflector channel structures on front body are discussed in this paper:closed-type deflector channel and single-plate deflector channel.And the water-guiding feature,mounting requirement,welding technique and overlapping relation with peripheral parts,etc.are explained.Taking the structure of deflector channel in the engine room as an example,the structure characteristics and categories of drain channel for deflector plate assembly in the engine room on a specific car,as well as key considerations in the design are described.Meanwhile,some examples of deflector channel structures are given,thereby providing reference for the design of deflector channel.
Brief Introduction to Structure Design of Front Bumper

YU Tian-yao,WU Cheng-ming,ZHAO Fu-quan

2011-01-01

Abstract:This article detailedly introduces the structure design of front bumper based on laws and regulations,assemblage with surrounding,and attentive matters in design.It is directive for designing work of front bumpers.
Research of Front-End Styling Design for a SUV Based on Pedestrian Protection

Lv Xiaojiang,Liu Weiguo,Zhou Dayong,Wang Chun,Zhao Fuquan

DOI: https://doi.org/10.3969/j.issn.1000-3703.2013.03.009

2013-01-01

Abstract:By analyzing the styling characteristic of head and leg impact areas,the styling control strategy is proposed with regard to engine hood,ventilation cover plate,engine hood leading edge,front bumper,fender and radiator grille.The front bumper support area concept is presented accordingly.Furthermore,the optimal position relationship of front bumper styling support area is obtained using the MADYMO under a given stiffness of bumper front-end components.The result indicates that the optimized front-end styling can control the injury value effectively and helps to improve performance of pedestrian protection.
Body Structure Optimization of a Car in the Frontal Crash

隋军,赵天丽,宋叶红,王志涛,赵福全

DOI: https://doi.org/10.3969/j.issn.1674-6546.2013.03.007

2013-01-01

Abstract:In order to solve the body structure problems of a certain car in a frontal crash, the acceleration, velocity curves and deformation mode of key body components are analyzed, the problems and causes relating to body structure in the frontal crash are also summarized in this paper. Furthermore, the optimized solution is presented related to energy absorption, left longitudinal beam structure, sub-frame and battery support based on vehicle safety development target and body structure requirement. The simulation analysis is performed in terms of the proposed solution. The post-processing of simulation result is executed using HyperGraph. The optimized results are analyzed and solution feasibility is verified. Thereby shortening the development cycle for vehicle safety performance and reducing the development cost of test validation in the full-scale crash are achieved. It can provide a theoretical basis for later actual vehicle validation.
Platform Design of Front Cross Member Structure on Front Floor Seat

Chen Chunlong,Jin Aijun,Li Honghua,Wei Xingmin,Wu Chengming,Zhao Fuquan

DOI: https://doi.org/10.3969/j.issn.1673-3142.2011.10.007

2011-01-01

Abstract:A solution to platform design of front cross member structure on third generation front floor seat is analyzed in this paper. The advantages and disadvantages are compared between an integral structure of seat cross member and a structure with fitted bracket on seat cross member, thus selecting an optimal structure to solve the development of component structure design of different vehicles on the same platform. Also, the result of engineering analysis indicates that this structure can fully satisfy the design requirements. The other component structures of body can be also compared with reference to this paper to seek the structure for platform development, thereby shortening the development and validation time, improving the design efficiency and reducing the development cost.
optimized design of radiator frame based on modified vehicle

Sun Fengwei,Xu Hao,Chen Jielong,Chen Jun,Li Guolin,Li Honghua,Zhao Fuquan

DOI: https://doi.org/10.3969/j.issn.2095-1469.2013.03.11

2013-01-01

Abstract:By introducing a modified vehicle, the paper expounds the common problem of the modified vehicle, i.e., the inadequate stiffness of radiator frame. It is obtained that an effective solution is to increase joined plank in the corner of radiator frame structure because of inadequate joined strength in the corner. Simultaneously, considering production and management of modified vehicles and the reassembly problem of radiator frame each time, the paper briefly introduces a design idea of treating radiator frame as a whole, i.e., the front-end modularization. A design concept of taking different front-end modules to assemble for different modified vehicles is introduced as well.
Optimization Design of Body Structure in Offset Crash

周丽,隋军,王志涛,金爱君,李国林,李宏华,赵福全

DOI: https://doi.org/10.3969/j.issn.1674-6546.2012.11.028

2012-01-01

Abstract:In order to improve vehicle safety performance in offset crash,the paper has adopted a lot of methods,including strengthening the structure of front cross member,front wall stringer,inner panel of A-pillar and reinforcement panel of A pillar as well as optimizing middle framework of front wall,threshold,floor stringers and connections among different parts.By combing CAE safety analysis of offset crash,the body structure has been optimized so as to reduce deformation and intrusion of cabin,which provides a safer and more comfortable driving environment.Finally,the target to improve body safety has reached,which greatly improves safety performance of vehicle during offset crash and provide better protection for occupants.
Design and optimisation of vehicle frontal bumper beam with alternative carbon fibre-reinforced plastics in corrugated sandwich structure

Mingzhi Li,Lin Sang,Zhihua Xiong,Wenbin Hou

DOI: https://doi.org/10.1080/13588265.2021.1981189

IF: 1.472

2021-10-27

International Journal of Crashworthiness

Abstract:Bumper beam is the key structure to protect the vehicle from impact collision. The aim of this paper is to propose a novel bumper beam consisting of continuous carbon fibre-reinforced plastic (CFRP) bumper beam, which is assembled by carbon fibre-reinforced epoxy (EP/CF) skin panels and carbon fibre-reinforced polycarbonate (PC/CF) corrugated sandwich cores. First, the proposed bumper structure is compression molded and then the crashworthiness performance is evaluated via impact experimental test and numerical analysis. It is demonstrated that the numerical results are in good agreement with the experimental data. Then, the effect of the thickness of panel and core on the intrusion, impact force and specific absorption on the impact performance is investigated by using the sensitivity analysis. Based on this, the Kriging proxy model is adopted for design of experiment (DOE), and a multi-objective optimisation with NSGA-II genetic algorithm is used to optimise the thickness (layers) of the skin panels and sandwich core. Results show that the impact performance meet the requirement of crashworthiness with a mass reduce of 35.57%. Accordingly, the proposed bumper beam exhibit superior impact performance, reduced weight to the traditional integrated counterpart. Furthermore, the structure-material-performance integration is an effective method to design CFRP as structural parts.

engineering, mechanical, manufacturing
Study on the Crashworthiness Performance of A Cargo Hold Support Column of A Civil Aircraft

Guiqiang Yang,Weiming Yin,Yi Wang

DOI: https://doi.org/10.1088/1742-6596/2450/1/012012

2023-03-09

Journal of Physics: Conference Series

Abstract:With the continuous development of China's general aviation industry, there are urgent requirements for research on aircraft crashworthiness to provide better safety for aircraft occupants. According to the results of long-term crash investigations, if crash safety design is taken into account at the earliest stages of aircraft design, most accidents will become viable or partially survivable, which can greatly improve the survival rate of aircraft passengers after an accident. In this paper, the design criteria and design methods for crash resistance technology of aircraft cargo uphold pillars are studied, and the crash simulation analysis of a certain type of aircraft is analyzed. First, a feasible design method and optimization principle are formulated according to the specific characteristics of a certain type of aircraft; Then, the crash resistance characteristics of a certain type of aircraft are analyzed, and the finite element model of the fuselage and cargo uphold pillars structure is established based on the three-dimensional electronic prototype of the aircraft. By the crash conditions specified in the relevant specifications, a mechanical simulation study of the aircraft is carried out, and the results are analyzed. Finally, constructive comments are given based on the simulation results. The reliability of the design is verified using simulation analysis, which provides a reference for the simulation and analysis of the anti-crash design of the aircraft cargo uphold pillars structure.
Concept Analysis and Optimization of Lower Leg Impact for Car Pedestrian Protection

WEI Dong-lai,NI Rui-yang,JIN Ye-jun,WANG Tao,WANG Jing,ZHAI Ming-li

DOI: https://doi.org/10.3969/j.issn.1672-545X.2013.08.001

2013-01-01

Abstract:Concept analysis and optimization of pedestrian protection is a key factor for the front-end structure design of a new car body in the initial phase.In order to assess the front-end exterior surface and deformation space of a new car,a MADYMO multi-body model is built with the information of exterior surfaces and sections of the car.Then Hyper Study is utilized to construct an optimization model which objective function is to minimize the deformable spaces of bonnet leading edge,bumper and spoiler supporter.The constraint function is demands of Global Technical Regulation on pedestrian protection.Optimization results indicate that the bumper should have enough deformable space and the spoiler supporter should have enough strength.Based on optimized stiffness curve,the front-end structure design of a car is more reasonable.
The Improvement of Front Cross Member in Vehicle Offset Impact

Wang Zhitao,Men Yongxin,Tang Zhihong,Wang Zelong,Zhao Fuquan

DOI: https://doi.org/10.3969/j.issn.1000-3703.2010.07.013

2010-01-01

Abstract:In view of the requirements of the project "Improvement Development of Front Cross Member",vehicle impact FE model is established in the paper,and by using CAE technology,the paper analyzed and identified the problems existed in the current body structure,and an effective improvement plan was proposed,which can effectively ensure vehicle safety performance,guide body structural design and avoid structure defect in new vehicle development.
Improving Design for Crashworthiness of a Minibus

Shilin Huang,Fengwu Liu,Jinhuan Zhang,Yonghua Zhu

DOI: https://doi.org/10.1504/ijvs.2005.007536

2005-01-01

International Journal of Vehicle Safety

Abstract:There has been concern for the crash safety of one kind of minibus in China because of its short, flat front-end structure. The minibus did not have enough crushable space for a frontal impact, and it had, in fact, failed to pass the Chinese vehicle safety regulations in frontal impact tests. This paper presents a method to improve the crashworthiness and occupant safety of this minibus. The design method, consisting of component tests and finite element analysis, focused both on the crashworthiness of the vehicle structure and occupant safety. An optimised design was obtained. The improved structural design has been implemented for the minibus. The time and cost of the redesign has been lowered substantially with the help of component tests and finite element analyses. We have shown that these procedures were effective for improving the crash safety of this minibus for the Chinese market.
Impact on Automotive Body Styling Dust Pollution

Xiu Jun Chen,Yu Long Wu,Xiao Sun,Shang Wu,Wei Lin Hu

DOI: https://doi.org/10.4028/www.scientific.net/amr.915-916.448

2014-01-01

Advanced Materials Research

Abstract:Use of aerodynamics, air flow spectrum and gives the car body surface of the vehicle surface pressure distribution of the site prone to dust contamination was analyzed, designed body structure, and reduce eddy current flow separation zone, the body surface can be reduced dust pollution, body structure designed to provide a reference.
Design of XX123 Auto Front Door Structure

Ding Hong

Abstract:As to the design of auto body,auto door is the most complicated auto body in structure.The degree of complexity of auto body structure and level of difficulties in design were determined by the door cover,which had great influence on manufacturing cost.The design process in structure of one conventional hinge type auto door was introduced mainly,and it was validated by analysis.

Engineering
Application of hot-formed sheet steel to front cross member of vehicle

Zhao Fu-quan

2011-01-01

Abstract:The structure of front cross member of a vehicle was analyzed and studied.It is concluded that there are two methods based on the vehicle structure at present.An appropriate structure design was carried out with two materials respectively aimed at the two methods of double structure and veneer structure,and then a crash performance test and CAE analysis were conducted.The test results indicate that the front cross member designed with hot-formed sheet steel BTR165 that compares to the double structure with common steel B340/590 can not only improve crash safety performance,but also reduce the vehicle weight.For this reason,it has an important significance in practical application.
A basic design for automotive crash boxes using an efficient corrugated conical tube

Alireza Mortazavi Moghaddam,Atefeh Kheradpisheh,Masoud Asgari

DOI: https://doi.org/10.1177/0954407021990921

2021-02-05

Abstract:Frontal vehicle structure is of high importance through crash energy managements and crash boxes are the fundamental structural component for vehicle safety as well as after sales issues. Similar to many other vehicle components, the detail design of crash box is usually part of manufacture knowhow. However, some guide lines are always available. In this article a general procedure is introduced for designing of crash box with the aid of novel thin walled structures and according to conventional crash scenarios. The problem is followed through some basic steps. Firstly, the crash box idea is selected through a wide range of previous investigated elements and is packaged in a real bench vehicle. Then thanks to the protection provided by the new crash box on the other more expensive components (e.g. headlamp, cooling pack, etc.), the effectiveness of this element are acknowledged through the low speed offset crash. Further on the robustness of new proposed crash box is approved by high speed crash simulations. The quasi-static simulations implemented during the analyses are carried out by finite element explicit code (Abaqus) and the FE modeling and dynamic simulation through the next steps are also performed in ANSA and PAM CRASH respectively. Finally in addition to the general crash box design proposed procedure, the achieved results demonstrated that the corrugated conical thin walled tubes deforms in regular and rather stable shape under both axial and oblique loadings. They also produced a reasonable reaction force versus deformations which leads to stiff and crashworthy energy absorber in comparison to traditional rectangular and even some special models like as origami shapes, and so they could be a valuable selection for crash box implementations in passenger cars.
Structural Analysis of Agricultural Truck Frame Based on the Finite Element Method

Yun Wang,Bin Lin

DOI: https://doi.org/10.4028/www.scientific.net/amm.37-38.1236

2010-01-01

Applied Mechanics and Materials

Abstract:Frame is an important truck part to connect and support engine, transmission, carriage and cab etc. It is important to analyze strength, stiffness and dynamic characteristics for frame design. This paper developed static analysis of a specific agricultural truck frame under two conditions of full load bending and reverse. The corresponding suggestions of structural modification were proposed. Then the dynamic response of truck frame caused by the external incentives was studied, namely harmonic response analysis and transient dynamic analysis. The paper not only analyzed whether the truck frame met the strength requirements, but also proposed the corresponding solutions for the possible cases of fatigue fracture and stress overloaded of the frame.
SUBSTANTIATION OF THE STRENGTH OF THE CAR BODY BEARING STRUCTURE TAKING INTO ACCOUNT CRITICAL STRESSES IN FLUTES

Elena Sorokina,Sergey Korshunov,Dmitriy Goncharov,Aleksandr Zhukov

DOI: https://doi.org/10.30987/2782-5957-2023-10-55-61

2023-10-12

Transport engineering

Abstract:The issues are considered that are connected with substantiating the strength and stability of the metal structure of a double-deck passenger car body under the influence of both compressive loads and the effects of excessive solar radiation and other external factors. A computational and experimental method is proposed for assessing the stability of corrugated sections of the roof slopes of passenger car bodies. Five variants of the structural design of the double-deck car roof covering are proposed. The stability of the covering for the accepted variants was evaluated by an analytical method using a tabular and rod finite element model. Based on the results of the calculation, a rational variant of the structural design of the car roof was determined. The results of theoretical studies are confirmed by the data of full-scale bench tests of the metal structure of a new double-deck car body.

Design of Rear Column Cornice of Vehicle Body

Analysis of Automobile Body Structure and Monocoque Body Welding Technology

Structure Design of Dash-Panel Upper Assembly on a Vehicle

Structure Design of Deflector Channel of an Automotive Body

Brief Introduction to Structure Design of Front Bumper

Research of Front-End Styling Design for a SUV Based on Pedestrian Protection

Body Structure Optimization of a Car in the Frontal Crash

Platform Design of Front Cross Member Structure on Front Floor Seat

optimized design of radiator frame based on modified vehicle

Optimization Design of Body Structure in Offset Crash

Design and optimisation of vehicle frontal bumper beam with alternative carbon fibre-reinforced plastics in corrugated sandwich structure

Study on the Crashworthiness Performance of A Cargo Hold Support Column of A Civil Aircraft

Concept Analysis and Optimization of Lower Leg Impact for Car Pedestrian Protection

The Improvement of Front Cross Member in Vehicle Offset Impact

Improving Design for Crashworthiness of a Minibus

Impact on Automotive Body Styling Dust Pollution

Design of XX123 Auto Front Door Structure

Application of hot-formed sheet steel to front cross member of vehicle

A basic design for automotive crash boxes using an efficient corrugated conical tube

Structural Analysis of Agricultural Truck Frame Based on the Finite Element Method

SUBSTANTIATION OF THE STRENGTH OF THE CAR BODY BEARING STRUCTURE TAKING INTO ACCOUNT CRITICAL STRESSES IN FLUTES