Abstract:The Pd–Cu–Clx/Al2O3 catalysts were prepared by an NH3 coordination-impregnation (CI) method in water and organic solvents, and exhibited much higher activity for CO oxidation than the catalyst prepared by conventional wet impregnation (WI) method. Their chemical and physical properties were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), temperature-programmed reduction (TPR), X-ray photoelectron spectroscopy (XPS) and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The results show that in the process of preparing the catalysts by CI, different solvents affect obviously their catalytic performance and isopropanol is the most suitable solvent among water, ethanol, acetone and isopropanol. The CO oxidation over Pd–Cu–Clx/Al2O3 catalyst (CI) can be accelerated remarkably with an increase of H2O concentration in the reactant gas, and it is weakly dependent on the CO and O2 concentrations. Compared with the catalyst prepared by WI, the catalyst prepared by CI possesses the higher dispersion and lower-temperature reducibility of copper phase, much more active Cu2+ species, and easier re-oxidation of Cu+. The Pd+ active site on the catalyst (CI) is more active than Pd2+ on the catalyst (WI), and the rate-determining step is the re-oxidation of Pd0 to Pd+ by Cu2+ on the catalyst (CI) instead of the re-oxidation of Cu+ to Cu2+ by O2 on the catalyst (WI).

Preparation of Co/Cu/γ-Al_2O_3 catalysts and its properties

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Effect of γ-Al2O3 Pore Structure on Activity of Supported Pd Catalysts in C9 Petroleum Resin Hydrogenation

Surface Properties of CoMg/Al2O3 Catalysts Evaluated in Aerobic Oxidation of P-Cresol

Preparation,Characterization and Catalytic Performance of CuO/Mn_2O_3/γ-Al_2O_3 Catalysts over CO Oxidation

Preparation of p-Hydroxybenzaldehyde by Liquid Phase Catalytic Oxidation of p-Cresol

Effect Of Co Pre-Treatment On Properties Of Cuo/Gamma-Al2o3 Catalyst

Effect of CO Pre-treatment on Properties of CuO/γ-Al2O3 Catalyst

Preparation, Characterization and Catalytic Performance of CuO/Mn2O3/gamma-Al2O3 Catalysts over CO Oxidation

Study on the Catalytic Reaction Mechanism of Low Temperature Oxidation of CO over Pd–Cu–Clx/Al2O3 Catalyst

Effect of precursors on the structure and activity of CuO-CoOx/γ-Al2O3 catalysts for NO reduction by CO.

Preparation of macroporousα-Al2O3 support and its application in preparing catalyst for CO coupling reaction

Preparation, structural characterization and catalyst activity of CuO-MnO2/Al2O3 catalysts

Effect of cobalt precursors on the dispersion, reduction, and CO oxidation of CoOx/γ-Al2O3 catalysts calcined in N2

Insights into the Precursor Effect on the Surface Structure of Γ-Al2o3 and NO + CO Catalytic Performance of CO-pretreated CuO/MnOx/γ-Al2O3 Catalysts.

Influence of CO pretreatment on the activities of CuO/γ-Al2O3 catalysts in CO + O2 reaction

Effects of Preparation Methods on the Activity of CuO/CeO 2 Catalysts for CO Oxidation

Influence of Alpha-Al2o3 Properties on Co Catalytic Coupling Reaction over Pd Catalyst

Preparation of Cu/AC Catalyst and Its Application for Desulfurization

Influence of Calcination Temperature on the Dispersion Behavior and CO Oxidation Properties of CuO/γ-Al<SUB>2</SUB>O<SUB>3</SUB> Catalyst: Influence of Calcination Temperature on the Dispersion Behavior and CO Oxidation Properties of CuO/γ-Al<SUB>2</SUB>O<SUB>3</SUB> Catalyst

Investigation of Surface Synergetic Oxygen Vacancy in CuO–CoO Binary Metal Oxides Supported on Γ-Al2o3 for NO Removal by CO