Effect of Zirconium Content on the Microstructure and Corrosion Behavior of As-Cast Ti-Al-Nb-Zr-Mo Alloy
Baoxian Su,Binbin Wang,Liangshun Luo,Liang Wang,Yanqing Su,Yanjin Xu,Fuxin Wang,Baoshuai Han,Haiguang Huang,Jingjie Guo,Hengzhi Fu
DOI: https://doi.org/10.1016/j.jmrt.2021.10.102
IF: 6.267
2021-01-01
Journal of Materials Research and Technology
Abstract:Investigation about how to enhance the corrosion properties of Ti alloys is essential to their actual applications in corrosive environments. Herein, the specific influences of Zr content on the corrosion behavior of Ti-6Al-3Nb-xZr-1Mo alloys (x = 2, 6, 10, 20 and 40 wt%) are systematically investigated using microstructure characterization, electrochemical and weight loss measurements. The results signify that all investigated alloys are composed of α and β phases; however, the increase of Zr content endows alloys with the refined thickness of lamellar α phase and enhanced volume fraction of intergranular retained β phase. Meanwhile, the corrosion resistance monotonously improves along with increasing the Zr content, directly characterized by the decreased corrosion current density, improved polarization resistance as well as reduced corrosion rate. The improvement in corrosion performance is a result of the alleviated micro-galvanic corrosion formed between α and β phases, increased volume fraction of corrosion-resistant β phase and modified composition of oxide film. One should note that the corrosion mode changes from the uniform corrosion to the mixed pitting and uniform corrosion with the Zr addition up to 40 wt%. Besides, surface analysis of samples after immersion tests reveals that the lamellar α phase is more susceptible to corrosion compared to the adjacent intergranular β phase, attributed to its higher concentration of Ti and Al elements. The current findings provide data that can be referenced for designing high-corrosion resistance materials for marine, biomedical applications and hydrochloric acid industries through composition optimization.