Abstract:Lead-acid batteries need to evolve to keep up with the electrification of vehicles and not lose ground to other technologies. The grid designed using a lead alloy thus plays a very important role in the performance of the battery, as, in the course of the various cycles, this component undergoes a natural corrosion process at positive potential, while immersed in a sulfuric acid solution. The aim of this study is therefore to examine the effect of the addition of calcium and bismuth on the microstructure, mechanical behavior and corrosion resistance of the Pb1.5%Sn alloy, with a view to using this in the positive grid of lead-acid batteries. The alloys developed during this study were evaluated using optical microscopy and scanning electron microscopy. Mechanical properties were investigated using universal tensile and hardness tests. Electrochemical tests of cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy were carried out in a 5M sulfuric acid solution at 25 °C to simulate the behavior of the alloy when in operation. The composition of the corrosion products formed were subsequently characterized by morphological analysis using scanning electron microscopy and the composition was determined using energy dispersive X-ray spectroscopy and X-ray diffraction analysis. The results indicate that the Pb1.5Sn0.12Bi alloy presented better corrosion resistance characteristics than the Pb1.5Sn0.05Ca alloy, making it suitable for inclusion in the composition of the positive electrode of a lead-acid battery. Further investment is however required to compensate for the shortcomings in relation to the mechanical properties of the material.

Modification Research on the Influence on Corrosion Film Properties of Pb‐Ca‐Sn Alloys of with Addition of Bi, Ag and Zn

Investigation on properties of anodic corrosion films formed on Pb-Ce and Pb-Ca-Sn alloys

Study on the structure of corrosion film and the performance of the Pb-Ca-Sn-Ce alloy

Bismuth addition affecting the microstructure evolution and anti-corrosion performance of Sn-3.0Ag-0.5Cu-xBi solder alloy

Influences of Temperature, H2SO4 Concentration and Sn Content on Corrosion Behaviors of PbSn Alloy in Sulfuric Acid Solution

The Influences of Silver and Zinc Addition on the Electrochemical Performances of the Pb–Ca–Sn Grids for Lead Acid Batteries

Corrosion Behaviour of New Pb-Ca Alloy in Sulfuric Acid Solution

Investigation on Properties of Anodic Film of Pb-Ca Alloy

Effects of Intermetallic-Forming Element Additions on Microstructure and Corrosion Behavior of Sn–Zn Solder Alloys

Effect of Combined Addition of La and Sm on Mechanical Properties, Microstructure Evolution, and Electrochemical Behavior of Mg-3Zn-1Mn/Sn-0.5Ca Alloy

Effect of Ag addition on the microstructure and corrosion properties of Sn–9Zn lead-free solder

Anodic Behaviors of Pb-Ca-Sn-Re Alloy and Tradditional Pb-Ca-Sn Alloy in Sulfuric Acid Solutions

Effect of Sn Content on the Properties of Passive Film on PbSn Alloy in Sulfuric Acid Solution

Effect of lanthanum, cerium and other elements on the electrochemical corrosion properties of Pb–Ca–Sn–Al alloy in lead–acid batteries

The effects of Sn content on the corrosion behavior and mechanical properties of Mg–5Gd–3Y– x Sn–0.5Zr alloys

The effect of Ca and Bi addition on the mechanical strength, corrosion resistance, and Rechargeability of Pb1.5Sn alloy for the positive grid of lead-acid batteries

Microstructure, Mechanical Properties and Corrosion Behaviors of Al–Li–Cu–Mg–Ag–Zn Alloys

Corrosion Behavior of Zn-Al Alloys in Saturated Ca(Oh)(2) Solution

EFFECT OF Sb AND Mn ADDITIONS ON THE CORROSION BEHAVIOUR OF Zn

Microstructure, Tensile Properties, and Corrosion Behavior of Die-Cast Mg-7Al-1Ca- X Sn Alloys

Effect of minor Cu addition on corrosion behavior of Sn-Zn-xCu touch-up solder alloys