Abstract:The electrochemical properties of the anodic films formed on PbCaSnCe and PbCaSn alloys at 0.9V (versus Hg/Hg2SO4 electrode) in 4.5mol/L sulfuric acid solution were investigated by linear sweeping voltammetry (LSV), ac voltammetry (ACV), electrochemical spectroscopy impedance (EIS), capacitance measurement and X-ray photoelectron spectroscopy (XPS) technology. Based on Mott–Schottky analysis, the effect of cerium on the semiconductor properties of anodic film is discussed as well in this paper. The experimental data shows that cerium can significantly decrease the impedance of the anodic film on PbCaSn alloy, and can improve the corrosion resistance of the alloy. It can be inferred from the capacitance measurement result that the passive film should be an n-type semiconductor. The addition of cerium can decrease the slope of M–S plot, which indicates the increasing of defect density in the film, and this can contribute to improve the conductivity of the anodic film on PbCaSn alloy. XPS results shows that the anodic film formed on PbCaSnCe alloy is consisted of PbO1+x (0<x<1) and PbSO4, while for the anodic film formed on PbCaSn alloy, PbO and PbSO4 are the major component. Considering the better conductivity of PbO1+x (0<x<1) than that of PbO, it is concluded that PbCaSnCe may serve as the candidate of the new grid material for maintenance-free lead acid battery.

Investigation on Properties of Anodic Film of Pb-Ca Alloy

Investigation on properties of anodic corrosion films formed on Pb-Ce and Pb-Ca-Sn alloys

Anodic Behaviors of Pb-Ca-Sn-Re Alloy and Tradditional Pb-Ca-Sn Alloy in Sulfuric Acid Solutions

Investigation on characteristics of anodic film formed on PbCaSnCe alloy in sulfuric acid solution

Corrosion Behaviour of New Pb-Ca Alloy in Sulfuric Acid Solution

Investigation on Mechanical Properties and Anodic Film of Pb-Sb-Ce Alloy

Anodic layer of Pb-Ca-Sn-Ce alloy for maintenance-free lead/acid batteries

Corrosion Behavior of Lead Alloy Anodes for Copper Electrowinning

INVESTIGATION OF ELECTROCHEMICAL PROPERTIES OF ANODIC FILM FORMED ON Pb-Ca-Re ALLOY

PROPERTIES OF ANODIC SCALE OF NEW Pb- Ca GRID ALLOY

The Effect of Cerium on the Anodic Behavior of Pb-Ca-Sn Alloy in Sulfuric Acid Solution

INVESTIGATION ON PROPERTY OF Pb-Ca-Sn-Re ALLOY

Investigation on properties of Pb-Sb-Re alloy

An electrochemical study on corrosion behavior of three alloys in artificial saliva with different pH

Performance of Anodic Films Formed on Lead Based-Rare Earth Alloys As Positive Grid

Comparison of the Anodic Films Formed on Pb-Ce Alloy and on Common Grid Alloys in Sulfuric Acid Solution

MECHANICAL RROPERTIES AND CORROSION PERFORMANCE OF A NOVEL Pb-Ca-RE ALLOY

Modification Research on the Influence on Corrosion Film Properties of Pb‐Ca‐Sn Alloys of with Addition of Bi, Ag and Zn

Anodic Behavior of Lead Alloy with Rare Earth Additive in Sulfuric Acid Solution

Anodic Behavior of Pb-Ag-Ca-Sr Alloy in Zinc Electrowinning

Effect of Sn Content on the Properties of Passive Film on PbSn Alloy in Sulfuric Acid Solution