Preparation of highly active CuCl catalyst for the direct process of methylchlorosilane production

W.-X. Luo,G.-R. Wang,J.-F. Wang

DOI: https://doi.org/10.1016/S0167-2991(06)81599-5

2006-01-01

Abstract:null

What problem does this paper attempt to address?

Activated Carbon Supported AlCl_3 Solid Acid Catalyst:Structural Characterization and Catalytic Properties for Redistribution Reaction of Methylchlorosilane

Bo‐Geng Li

2006-01-01

Abstract:Methyltrichlorosilane(M_1) and trimethylchlorosilane(M_3) are usually produced as byproducts in the direct synthesis process of dimethyldichlorosilane.The two chemicals could be converted into more valuable dimethyldichlorosilane through the redistribution technology.By using activated carbon as support, environmentally benign activated carbon supported AlCl_ 3 solid acid catalysts were prepared by the impregnation-evaporation-calcination method.The effects of acid-treatment conditions, AlCl_ 3 loading and activation(calcination)temperature on the catalytic activity were examined for the redistribution reaction of methyltrichlorosilane and trimethylchlorosilane in a 20 mm×800 mm fixed bed reactor under conditions of 310℃,n(M_1/M_3)=1.0 and LHSV=1.5 h~ -1 , and the stability of catalytic activity was investigated also.The structure and surface properties of catalysts were characterized with BET, XRD, TG-DSC and pyridine-adsorbed Raman spectroscopy.The results revealed that it would be better if the activated carbon was treated by hydrochloric acid of 2.0 mol·L~ -1 for 6 h,and suitable conditions for AlCl_ 3 loading and calcination temperature were 1.87 mmol·g~ -1 and 450—500℃ respectively.The stability of the activated carbon supported AlCl_3 catalyst was good for at least 100 h.The XRD and TG-DSC results indicated that AlCl_ 3 would no longer exist in the form of AlCl_ 3 crystal after it was supported on activated carbon and activated.The TG-DSC analysis showed that further heating of the catalyst at 485—600℃ resulted in decomposition and removal of active component from the catalyst surface.The pyridine-adsorbed Raman spectroscopy revealed that the active component of the catalyst behaved as Lewis acid.
CONVERSION AND UTILIZATION OF BYPRODUCTS IN DIRECT SYNTHESIS OF METHYLCHLOROSILANES

卜志扬,范宏,李伯耿,任不凡,邵月刚,陈为新

DOI: https://doi.org/10.3321/j.issn:0438-1157.2004.05.031

2004-01-01

Abstract:The direct synthesis of methylchlorosilanes by reacting metallic silicon with methyl chloride in the presence of a copper catalyst yields low-boiling component, high-boiling component and methyltrichlorosilane as by-products. The process was proposed for preparing monosilanes from the HBC fraction by reacting it with hydrogen chloride in the presence of an amine or amide catalyst. The conversion of disilanes into monosilanes is above 80% in general and the best is 86%. A method is also proposed for preparing dimethyldichlorosilane from methyltrichlorosilane, reacting simultaneously with the LBC components having a high content of methyl groups and with the HBC non-cleavable components, in the presence of a catalyst, in which the best conversion is 66.2%, and the best content of dimethyldichlorosilane in final products is 46.4%.
Preparation of dimethyldichlorosilane by redistributing methyltrichlorosilane and trimethylchlorosilane with AlCl3 supported catalysts

Xue-Fei WANG,Jun TAN,Hong FAN,Zhi-Yang BU,Bo-Geng LI

DOI: https://doi.org/10.3969/j.issn.1005-9954.2006.01.018

2006-01-01

Chemical engineering

Abstract:Several AlCl_3 supported catalysts were prepared and used in the redistribution reaction of methyltrichlorosilane and trimethylchlorosilane to produce dimethyldichlorosilane.The features of the catalysts were investigated.Also L_(16)(4~5) orthogonal experiments were carried out to study the effects of reaction temperature,reaction time,catalyst quantity and mol ratio of reaction materials on the yield of dimethyldichlorosilane.The results show that the most predominated factors for the yield are reaction temperature and catalyst quantity.Under the optimum reaction conditions,the yield of dimethyldichlorosilane can reach to 60.6%.
A Bi-component Cu Catalyst for the Direct Synthesis of Methylchlorosilane from Silicon and Methyl Chloride

Wang Chao,Wang Guangrun,Wang Jinfu

DOI: https://doi.org/10.1016/s1004-9541(14)60034-3

2014-01-01

Abstract:A bi-component catalyst comprising CuCl and metallic copper was used in the direct synthesis of methylchlorosilane to study the catalytic synergy between the different copper sources. The catalyst exhibited high activity and high selectivity of dimethyldichlorosilane (M2) in the stirred bed reactor. The effect of the proportion of CuCl used was studied and 10%-30% CuCl gave the best yield of M2. The use of CuCl decreased the induction period of reaction, improved the selectivity in the induction stage, and gave a longer stable stage. These results suggest that bi-component catalyst has advantages in the direct synthesis reaction.
Process characteristics of Cu-based catalyst in direct synthesis of methylchlorosilanes

Chao Wang,WANG Guang-run,WANG Jin-fu

2011-01-01

Abstract:The copper-based catalyst promoted by a small quantity of zinc, tin and phosphorus was applied in the reaction between silicon powder and methyl chloride to synthesize methylchlorosilanes in a stirred bed. The effects of temperature, pressure and content of catalyst on the reaction rate and product selectivity were investigated. Under the conditions of 320°C and 0.1 MPa, the reaction rate of 210 g/(kg·h) and the selectivity of 87.7% for dimethyldichlorosilane could be achieved in the steady period. Raising the temperature increased the reaction rate remarkably, while the selectivity began to decline above 330°C. The reaction rate obeyed first-order kinetic model to methyl chloride and the selectivity was hardly affected by the pressure below 0.3 MPa. Increasing the content of catalyst benefitted the reaction rate within limits, yet the steady period was shortened and the utilization efficiency of silicon reduced.
Study on Redistribution of Methyltrichlorosilane and Trimethylchlorosilane over AlCl3 Supported Catalyst

Jun Tan,Hong Fan,Zhiyang Bu,Bogeng Li

DOI: https://doi.org/10.3969/j.issn.1001-7631.2005.04.005

2005-01-01

Abstract:Several AlCl_3 supported catalysts were prepared and used in redistribution of methyl- trichlorosilane and trimethylchlorosilane,which byproduct were produced from the direct synthesis of dimethyl-dichlorosilane,and dimethyldichlorosilane.The activity of catalysts were investigated in the fixed-bed reactor(length 800 mm,ID 30 mm).The test results showed that AlCl_3 supported on activated carbon catalyst was best in yield of 70%.Optimum reaction conditions of redistribution were determined,in which the molor ratio of reactants was 1.0,LHSV was 0.66 mL/(h·g-cat), reaction temperature was 320℃.The stability of the AlCl_3 supported on activated carbon catalyst was good within 100 h.
Modification of CuCl catalyst used in the direct synthesis reaction of methyl chlorosilane monomer

Wu-xi LUO,Guang-run WANG,Jin-fu WANG,Yong JIN

DOI: https://doi.org/10.3969/j.issn.1005-9954.2006.02.011

2006-01-01

Abstract:A new method to modify the CuCl catalyst,used in the direct synthesis reaction of methylchlorosilane monomer,with methyltrichlorosilane(M_1),was proposed.The CuCl catalyst was prepared by wet-deposited method and on its surface bore much hydroxyl.The hydroxyl decreased largely,determined by IR technique,after the M_1 modification.Reaction-TG method was introduced to evaluate the reaction between CuCl and silicon particles to form the catalytic centers,and the results show that the modified catalyst can reduce the induced temperature for forming the catalytic centers.A more convenient way to evaluate the monomer synthesis reaction was also found.The experimental results obtained from the evaluated reactor of methylchrolosilane synthesis show that the modified CuCl catalyst can markedly enhance the reaction rate,selectivity and silicon conversion.
Efficient Ullmann C–X coupling reaction catalyzed by a recoverable functionalized-chitosan supported copper complex

Xuemin Liu,Shuo Chang,Xinzhi Chen,Xin Ge,Chao Qian

DOI: https://doi.org/10.1039/c8nj02677g

IF: 3.3

2018-01-01

New Journal of Chemistry

Abstract:Three different types of functionalized-CS were prepared and anchored with copper salts for use as the catalyst for the Ullmann C-X coupling reaction. The Schiff-basic chitosan supported copper complex (PCCS@CuI) exhibits the highest catalytic activity. The structure of the catalyst was characterized by FTIR spectroscopy, TG, XRD, SEM, EDS and XPS. This catalyst exhibited high applicability for the C-N and C-S coupling reactions, in which good to excellent yields were obtained. Its easy separation, good reusability and stability were notable.
Conversion of Methyltrichlorosilane in Stirred Bed Reactor by Methylalumminumchloride Method

TAN Jun,FAN Hong,BU Zhiyang,LI Bogeng

DOI: https://doi.org/10.3321/j.issn:0438-1157.2006.12.015

2006-01-01

Abstract:This paper focuses on the reaction technique of converting methyltrichlorosilane, the main by-product in the direct synthesis of dimethyldichlorosilane, to more valuable methylchlorosilanes.The conversion reaction of methyltrichlorosilane in a stirred bed reactor by the methylaluminumchloride method with aluminum powder and methylchloride as raw materials was systematically investigated.It was found that after an introduction period of about 100 min, the reaction reached a steady state with good activity in the absence of catalysts by the aid of mechanical stirring in the reactor which promoted the elimination of oxidized layer on the surface of the aluminum powder and speeded up the surface renewal process.Increasing the stirring speed and raising the reaction temperature to the optimum levels were favorable to the conversion reaction.The molar proportion of methyl chloride to methyltricholrosilane (m) in the feed had great effect on the reaction conversion and product composition.The concentrations of dimethyldichlorosilane and trimethylchlorosilane in the product were relatively higher while the reaction conversion of methyltrichlorosilane was lower when m2.0,the trimethylchlorosilane was the main conversion product when m=2.0, and tetramethylsilane became the main product at a higher reaction conversion of methyltrichlorosilane when m2.0.The reaction mechanism was discussed by analysing the SEM surface morphology of the aluminum powder before and after reaction.
Effect of Copper Content on the Direct Process of Organosilane Synthesis from Silicon and Methyl Chloride

Luo Wuxi,Zhang Guoliang,Wang Guangrun,Wang Jinfu

DOI: https://doi.org/10.1016/s1007-0214(06)70185-7

2006-01-01

Abstract:The effect of copper concentration on the performance of the catalytic reaction between silicon and methyl chloride was investigated using online gas chromatogram. The catalyst concentration greatly influences various aspects of the direct organosilane synthesis process, including the reaction rate, the selectivity, and the silicon conversion. The reaction activity and the silicon conversion increase as the catalyst concentration increases. However, the reaction selectivity decreases for the catalyst concentrations more than 9 wt.%. The cross-sections of deactivated contact mass particles were observed by optical microscopy and analyzed by scanning electron microscope combined with energy dispersive X-ray detector (SEM-EDX). The observations showed that a textured substance formed on the original flat surface of the silicon particles after deactivation with copper only in a shallow surface layer of the contact mass. This indicates that the copper diffusion is the rate limiting step which causes the reaction deactivation.
Effect Of Cucl Particle Size On The Reduction Reaction By Silicon In Preparation Of Contact Mass Used For Methylchlorosilane Synthesis

Wx Luo,Gr Wang,Jf Wang

DOI: https://doi.org/10.1021/ie058044+

2006-01-01

Industrial & Engineering Chemistry Research

Abstract:Effect of CuCl particle size on the reduction reaction by silicon has been investigated with a purpose of studying the formation of Si-Cu alloy, which can catalyze the direct synthesis of methylchlorosilanes. It has been found that the reaction rate is proportional to the contact area between CuCl and Si, indicating that the reaction is controlled by solid diffusion. After the reduction reaction, the detectable copper-containing species in X-ray diffraction (XRD) spectra are less for the finer CuCl particles. This result proves that the Si-Cu active species is highly dispersed. The CuCl catalyst prepared by introduction of different dispersants in the traditional process has been studied experimentally and by means of XRD analysis. Furthermore, it has also been evaluated for the final direct synthesis reaction. The experimental results sketched an affinitive correlativity of the reaction effect of the direct process with the reduction reaction.
Facile and Flexible Preparation of Highly Active CuCe Monolithic Catalysts for VOCs Combustion

Xiao Chen,Qinqi Xu,Ying Zhou,Qiulian Zhu,Haifeng Huang,Zhiyan Pan,Pengfei Zhang,Sheng Dai,Hanfeng Lu

DOI: https://doi.org/10.1002/slct.201701850

2017-01-01

ChemistrySelect

Abstract:A novel and practical strategy of preparing mixed oxides/monolithic catalysts for exhaust gas purification is presented in this work. Highly active nano-CuCe catalyst dispersion liquid is synthesized through solvothermal method, and then various CuCe monolithic catalysts are prepared just by a simple spraying method. The as-prepared catalysts showed excellent activity and stability for volatile organic compounds (VOCs) destruction, which can be attributed to the good structural and chemical properties of the well-dispersed CuCe active species on the carrier surface. This strategy provides a very facile and flexible way for preparation of monolithic catalysts with versatile shapes to accommodate VOCs combustion facilities. It shows great potential in practical applications.
Effects of CuCl Source and Content on Direct Synthesis of Triethoxysilane from Silicon and Ethanol

Zhang Lei,Li Ji,Yang Kai,Hu Chenfa,Ge Shibin,Yang Chunhui

DOI: https://doi.org/10.4028/www.scientific.net/amr.233-235.1534

2011-01-01

Advanced Materials Research

Abstract:Effect of CuCl source and content on formation of triethoxysilane in the direct process is described and discussed. The two sources of CuCl and the contact masses from the reduction reaction by silicon and CuCl have been investigated by X-ray diffraction, scanning electron microscope and N2 adsorption-desorption with a purpose of studying the reasons that different CuCl sources cause different reaction effect. We found Si-Cu intermetallics in proportion to the contact area between CuCl and Si. So CuCl with the characteristics of finer particles and high specific surface area is beneficial to form vast scale active Si-Cu intermetallics. The CuCl concentration on the performance of the catalytic reaction between silicon and ethanol was investigated by online gas chromatogram. The catalyst concentration greatly influences various aspects of the direct synthesis of triethoxysilane, including the induction time, the reaction rate, the selectivity and the silicon conversion. The reaction activity and yield of triethoxysilane increase as the catalyst concentration increases. However, the reaction selectivity decreases when the catalyst concentration is more than 5%, in this case the yield of triethoxysilane is slightly lower than 10% catalyst concentration.
Synthesis of Methylphenyldichlorosilane with a Homogeneous Catalyst

Tiefeng Wang

2011-01-01

Abstract:Methylphenyldichlorosilane was synthesized using methyldichlorosilane and chlorobenzene as raw materials and chloroform as the catalyst by an adaptation of the gas phase catalytic condensation method.The reaction yield and selectivity were measured by gas chromatography.The influence of the temperature,pressure and space time on the yield and selectivity was studied.The optimal reaction conditions were:temperature=600 ℃,pressure≥0.5 MPa,and space time=46.9～70.4 s.The highest product yield and selectivity were,respectively,32.8% and 34.3%,which were obtained with the reaction conditions of 0.56% CHCl3,600 ℃,0.7 MPa and 56.3 s space time.
Highly Selective Catalytic Oxidation of Methane to Methanol Using Cu-Pd/Anatase

Liqun Wang,Jingting Jin,Wenzhi Li,Cunshuo Li,Leyu Zhu,Zheng Zhou,Lulu Zhang,Xia Zhang,Liang Yuan

DOI: https://doi.org/10.1039/d4ee02671c

IF: 32.5

2024-01-01

Energy & Environmental Science

Abstract:Direct conversion of methane into high value-added products is of great practical significance. The synergistic effect in catalysts with dual-active components show potential to increase the methanol yield and selectivity. In this work, Cu-Pd/anatase is in situ generated and exhibits a relatively high methanol yield rate of similar to 31 800 mu mol gcat-1 h-1 and near-exclusive selectivity of liquid products (methanol). The reaction mechanism behind the heterogeneous catalysis process has been investigated. It is confirmed that copper ions hold the ability to produce hydrogen peroxide which can be further promoted by anatase. Chlorine ions can promote the stable adsorption of CO and the formation of *CH3 intermediates, facilitating high activity and selectivity for methanol production. Pd and Cu cooperatively dissociate methane, which promotes the formation of key configuration metal-CH3. The (center dot)CH3 intermediate desorption will be facilitated on Cu-Pd/anatase through the manner of electron regulation, which is proved by the combination of density functional theory calculations and in situ infrared spectroscopy. Methanol is formed when a (center dot)CH3 is desorbed from a copper site and combines with a hydroxyl radical. Cu-Pd/anatase is highly efficient in converting methane to methanol, exhibiting a relatively high methanol yield rate of similar to 31 800 mu mol gcat-1 h-1 and near-exclusive selectivity of liquid products (methanol).
Synthesis of methylchlorosilane by direct process and its gas chromatographic analysis

Chen Rong,Wang Jiajun,Tian Lulu,Gu Xueping,Feng Lianfang,Shao Yuegang

DOI: https://doi.org/10.3969/j.issn.1000-1255.2007.02.002

2007-01-01

Abstract:Two preparation methods of contact mass were used to mix ZnO promoters with copper powder formed by oxidation and reduction reaction from CuSO4 in order to synthesize methylchlorosilane by direct process. The contact mass prepared with ultrasonic dispersion method was proved to hold higher activity than that of prepared with simple mixing method. Both the selectivity of dimethyldichlorosilane and the silicon powder conversion in the reaction process were much higher. In addition, methylchlorosilanes were analyzed quantitatively with gas chromatogram. Methyltrichlorosilane, dimethyldichlorosilane and trimethylchlorosilane were analyzed quantitatively by OV-210 capillary column with flame ionization detector as well as benzene was adopted as the internal standard. And the analysis method was proved to be precise and accurate.
Synthesis of CuI-modified thiol-functionalized MCM-41 silica-based materials and their catalytic tetralin performance

Chengqiang Wu,Yingping Li,Yongping Ma,Yuexiang Lei,Meijing Wang,Zhen Chen

DOI: https://doi.org/10.1007/s10934-024-01560-5

2024-02-20

Journal of Porous Materials

Abstract:A novel loaded copper ion catalyst, Cu/MCM-41-SH, was synthesized using CuI-modified thiol-functionalized MCM-41 silica-based materials, and the prepared catalysts were characterized by XPS, FT-IR, SEM and N 2 adsorption–desorption techniques. The XPS results indicated that the chemical valence of the copper that adsorbed on the CuI/MCM-41-SH surface was + 1 valence. N 2 adsorption–desorption showed that the adsorption–desorption isotherms of both MCM-41 and CuI/MCM-41-SH materials were type IV with H4-type hysteresis loops, and the pore size and specific surface area of the materials were reduced. This work demonstrates that that when the reaction time was 2 h, the reaction temperature was 80 °C and the catalyst dosage was 100 mg, the conversion of tetralin was obtained as 92.63% and the selectivity of α-tetralone was 84.84%. The catalyst showed good reusability in the three recovery experiments. These results show that the catalyst has potential applications for green and sustainable development.

materials science, multidisciplinary,chemistry, physical, applied
Partially Reduced CuO Nanoparticles As Multicomponent Cu-Based Catalysts for the Rochow Reaction

Wuyuan Liu,Lihua Jia,Yingli Wang,Lianying Song,Yongxia Zhu,Xin Chen,Ziyi Zhong,Fabing Su

DOI: https://doi.org/10.1021/ie400369z

2013-01-01

Abstract:We report the application of partially reduced CuO nanoparticles as Cu-based catalysts for dimethyldichlorosilane (M2) synthesis via the Rochow reaction. The CuO nanoparticles (50–100 nm) were synthesized by a simple precipitation method and partially reduced in a H2/N2 mixture gas to obtain the Cu-based catalyst containing different Cu species of CuO, Cu2O, and Cu. It was found that the composition of the samples could be tailored by varying the volume ratio of H2/N2 at the given reduction temperature and time. Compared to the synthesized CuO and Cu nanoparticles, as well as the commercial CuO microparticles, these multicomponent Cu-based catalysts, particularly for the CuO–Cu2O–Cu catalyst, showed much higher M2 selectivity and Si conversion in the Rochow reaction. The enhanced catalytic performance is attributed to the smaller particle size and the synergistic effect among the different components. The work would help to develop novel ternary Cu-based catalysts for organosilane synthesis.
Enhancing Dimethyldichlorosilane Production in Rochow-Müller Reaction by Adding ZnO-Sn-P Co-promoter in CuO/SiO2

Jing Xu,Shaojia Song,Yongxia Zhu,Baofang Jin,Yongjun Ji,Zhenxing Li,Dongxing Fu,Ziyi Zhong,Guangwen Xu,Fabing Su

DOI: https://doi.org/10.1016/j.jcat.2022.04.026

IF: 7.3

2022-04-01

Journal of Catalysis

Abstract:Commercial nonsupported Cu-based catalysts have to be mixed with various promoters to enhance their catalytic performance in the Rochow-Müller reaction. However, considerable debates still exist at a fundamental level on how these promoters function. Herein, we systematically investigated the effects of ZnO, Sn, and P promoters on the catalytic property of the CuO/SiO2 catalyst for synthesizing dimethyldichlorosilane (M2) via the Rochow-Müller reaction. A series of CuO/SiO2 catalysts containing these promoters were prepared by the ball-milling method. The CuO/SiO2 catalyst with the coexistence of ZnO, P, and Sn promoters showed the highest catalytic activity, even superior to the commercial nonsupported Cu-based catalysts. Detailed characterizations showed the increased capability for oxygen adsorption on the CuO surface and dissociative chemisorption of methyl chloride led to the improved catalytic performance. This work deciphers the promoter mechanism and demonstrates a promising strategy for the efficient synthesis of M2.

chemistry, physical,engineering, chemical
Complete Liquid Phase Preparation and Characterization of CuZnAlSi Catalysts for DME Synthesis in Slurry Reactor

LI Zhihong,HUANG Wei,FAN Jinchuan,ZUO Zhijun,XIE Kechang

2009-01-01

Abstract:A series of CuZnAlSi bifunctional catalysts with different SiO2 contents were prepared by a complete liquid phase method,and the catalysts were characterized by using in-situ XPS,XRD,BET and NH3-TPD.The catalytic performance was evaluated in a slurry reactor.Based on these results,it was deduced that SiO2 in the CuZnAlSi catalyst could interact with AlOOH resulting in the change of some physicochemical properties,such as the pore structure and surface acidity,thus the catalytic activity for DME synthesis has got improved.It was found from the in-situ XPS characterization that the surface active species for the methanol synthesis in the process of DME production is composed by the reduced Cu0 species and ZnO.However,the stability of the catalyst decreased owing to the introduction of SiO2,which may due to a lower interaction among the components of Cu,Zn and Al.

Preparation of highly active CuCl catalyst for the direct process of methylchlorosilane production

Activated Carbon Supported AlCl_3 Solid Acid Catalyst:Structural Characterization and Catalytic Properties for Redistribution Reaction of Methylchlorosilane

CONVERSION AND UTILIZATION OF BYPRODUCTS IN DIRECT SYNTHESIS OF METHYLCHLOROSILANES

Preparation of dimethyldichlorosilane by redistributing methyltrichlorosilane and trimethylchlorosilane with AlCl3 supported catalysts

A Bi-component Cu Catalyst for the Direct Synthesis of Methylchlorosilane from Silicon and Methyl Chloride

Process characteristics of Cu-based catalyst in direct synthesis of methylchlorosilanes

Study on Redistribution of Methyltrichlorosilane and Trimethylchlorosilane over AlCl3 Supported Catalyst

Modification of CuCl catalyst used in the direct synthesis reaction of methyl chlorosilane monomer

Efficient Ullmann C–X coupling reaction catalyzed by a recoverable functionalized-chitosan supported copper complex

Conversion of Methyltrichlorosilane in Stirred Bed Reactor by Methylalumminumchloride Method

Effect of Copper Content on the Direct Process of Organosilane Synthesis from Silicon and Methyl Chloride

Effect Of Cucl Particle Size On The Reduction Reaction By Silicon In Preparation Of Contact Mass Used For Methylchlorosilane Synthesis

Facile and Flexible Preparation of Highly Active CuCe Monolithic Catalysts for VOCs Combustion

Effects of CuCl Source and Content on Direct Synthesis of Triethoxysilane from Silicon and Ethanol

Synthesis of Methylphenyldichlorosilane with a Homogeneous Catalyst

Highly Selective Catalytic Oxidation of Methane to Methanol Using Cu-Pd/Anatase

Synthesis of methylchlorosilane by direct process and its gas chromatographic analysis

Synthesis of CuI-modified thiol-functionalized MCM-41 silica-based materials and their catalytic tetralin performance

Partially Reduced CuO Nanoparticles As Multicomponent Cu-Based Catalysts for the Rochow Reaction

Enhancing Dimethyldichlorosilane Production in Rochow-Müller Reaction by Adding ZnO-Sn-P Co-promoter in CuO/SiO2

Complete Liquid Phase Preparation and Characterization of CuZnAlSi Catalysts for DME Synthesis in Slurry Reactor