Abstract:This paper focuses on the reaction technique of converting methyltrichlorosilane, the main by-product in the direct synthesis of dimethyldichlorosilane, to more valuable methylchlorosilanes.The conversion reaction of methyltrichlorosilane in a stirred bed reactor by the methylaluminumchloride method with aluminum powder and methylchloride as raw materials was systematically investigated.It was found that after an introduction period of about 100 min, the reaction reached a steady state with good activity in the absence of catalysts by the aid of mechanical stirring in the reactor which promoted the elimination of oxidized layer on the surface of the aluminum powder and speeded up the surface renewal process.Increasing the stirring speed and raising the reaction temperature to the optimum levels were favorable to the conversion reaction.The molar proportion of methyl chloride to methyltricholrosilane (m) in the feed had great effect on the reaction conversion and product composition.The concentrations of dimethyldichlorosilane and trimethylchlorosilane in the product were relatively higher while the reaction conversion of methyltrichlorosilane was lower when m2.0,the trimethylchlorosilane was the main conversion product when m=2.0, and tetramethylsilane became the main product at a higher reaction conversion of methyltrichlorosilane when m2.0.The reaction mechanism was discussed by analysing the SEM surface morphology of the aluminum powder before and after reaction.

CONVERSION AND UTILIZATION OF BYPRODUCTS IN DIRECT SYNTHESIS OF METHYLCHLOROSILANES

Development of Comprehensive Utilization by Redistribution and Convertion of Methyltrichlorosilane

Conversion of Methyltrichlorosilane in Stirred Bed Reactor by Methylalumminumchloride Method

Advances in synthetic technology of organosilicon monomer

Synthesis of Dihydromyrcenoi-type Silane Coupling Agent

Preparation of dimethyldichlorosilane by redistributing methyltrichlorosilane and trimethylchlorosilane with AlCl3 supported catalysts

Study on Redistribution of Methyltrichlorosilane and Low-boiling Residues Using Activated Carbon Supported AlCl3 Catalysts

Study on Redistribution of Methyltrichlorosilane and Trimethylchlorosilane over AlCl3 Supported Catalyst

A Bi-component Cu Catalyst for the Direct Synthesis of Methylchlorosilane from Silicon and Methyl Chloride

Process characteristics of Cu-based catalyst in direct synthesis of methylchlorosilanes

Hydrosilylation of C–C Π-Bonds

Mechanistic investigations of the disproportionation reaction catalyzed by AlCl3/NH2-MIL-53(Al) to produce dimethyldichlorosilane

Exploration of photocatalytic chlorination combined simplified distillation to produce electronic grade high-purity trichlorosilane via microchannel reactor experiments, multiphase-flow simulation, ReaxFF MD, and DFT

Direct Synthesis of Trimethoxysilane in Orthogonal Experiment

Modification of CuCl catalyst used in the direct synthesis reaction of methyl chlorosilane monomer

Chlorination of trichlorosilane/chlorodimethylsilane using metal chlorides: experimental and mechanistic investigations

The Direct Synthesis of Methylchlorosilanes in A Fixed-Bed Reactor

The Synthesis of Triethoxysilane Using Organocopper Salts As Catalyst

Synthesis of methylchlorosilane by direct process and its gas chromatographic analysis

From silicon to silicones without dimethyldichlorosilane. Direct green mechanochemical synthesis of methylmethoxysilanes from silicon and dimethyl ether.

Highly Regioselective Sequential 1,1-Dihydrosilylation of Terminal Aliphatic Alkynes with Primary Silanes: Highly Regioselective Sequential 1,1-Dihydrosilylation of Terminal Aliphatic Alkynes with Primary Silanes†