Abstract:Methyltrichlorosilane(M_1) and trimethylchlorosilane(M_3) are usually produced as byproducts in the direct synthesis process of dimethyldichlorosilane.The two chemicals could be converted into more valuable dimethyldichlorosilane through the redistribution technology.By using activated carbon as support, environmentally benign activated carbon supported AlCl_ 3 solid acid catalysts were prepared by the impregnation-evaporation-calcination method.The effects of acid-treatment conditions, AlCl_ 3 loading and activation(calcination)temperature on the catalytic activity were examined for the redistribution reaction of methyltrichlorosilane and trimethylchlorosilane in a 20 mm×800 mm fixed bed reactor under conditions of 310℃,n(M_1/M_3)=1.0 and LHSV=1.5 h~ -1 , and the stability of catalytic activity was investigated also.The structure and surface properties of catalysts were characterized with BET, XRD, TG-DSC and pyridine-adsorbed Raman spectroscopy.The results revealed that it would be better if the activated carbon was treated by hydrochloric acid of 2.0 mol·L~ -1 for 6 h,and suitable conditions for AlCl_ 3 loading and calcination temperature were 1.87 mmol·g~ -1 and 450—500℃ respectively.The stability of the activated carbon supported AlCl_3 catalyst was good for at least 100 h.The XRD and TG-DSC results indicated that AlCl_ 3 would no longer exist in the form of AlCl_ 3 crystal after it was supported on activated carbon and activated.The TG-DSC analysis showed that further heating of the catalyst at 485—600℃ resulted in decomposition and removal of active component from the catalyst surface.The pyridine-adsorbed Raman spectroscopy revealed that the active component of the catalyst behaved as Lewis acid.

Development of Comprehensive Utilization by Redistribution and Convertion of Methyltrichlorosilane

Advances in synthetic technology of organosilicon monomer

CONVERSION AND UTILIZATION OF BYPRODUCTS IN DIRECT SYNTHESIS OF METHYLCHLOROSILANES

Conversion of Methyltrichlorosilane in Stirred Bed Reactor by Methylalumminumchloride Method

Study on Redistribution of Methyltrichlorosilane and Low-boiling Residues Using Activated Carbon Supported AlCl3 Catalysts

Activated Carbon Supported AlCl_3 Solid Acid Catalyst:Structural Characterization and Catalytic Properties for Redistribution Reaction of Methylchlorosilane

Synthesis of Polyether-grafted Polysiloxanes and Its Application in Metal Cleanser

Preparation of dimethyldichlorosilane by redistributing methyltrichlorosilane and trimethylchlorosilane with AlCl3 supported catalysts

Study on Redistribution of Methyltrichlorosilane and Trimethylchlorosilane over AlCl3 Supported Catalyst

Study on Synthesis and Analysis of Methyltriacetoxysilane

The Application of Hydrosilylation in Functional Organosilicon Compounds and Materials

Analysis and pathway exploration of high-boiling residues for methyl-chlorosilane-monomers production

Mechanistic investigations of the disproportionation reaction catalyzed by AlCl3/NH2-MIL-53(Al) to produce dimethyldichlorosilane

Mechanism of dimethyldichlorosilane preparation by NH2-MIL-53(Al)@γ-Al2O3 core-shell catalyst before and after AlCl3 modification

Exploration of photocatalytic chlorination combined simplified distillation to produce electronic grade high-purity trichlorosilane via microchannel reactor experiments, multiphase-flow simulation, ReaxFF MD, and DFT

Purification of Organosilicon Waste Silicon Powder with Hydrometallurgy

Thermodynamic analysis and process optimization of organosilicon distillation systems

Preparation of 1,3-bis (γ-chloropropyl)-1,1,3,3-tetramethyldisiloxane

From silicon to silicones without dimethyldichlorosilane. Direct green mechanochemical synthesis of methylmethoxysilanes from silicon and dimethyl ether.

Research Progress in Synthesis of 1,1,1,3,5,5,5-Heptamethyltrisiloxane

Synthesis of sodium silicate using industrial by-products glauber’s salt and microsilica: Effective reuse of the waste