Abstract:This work describes a new electrochemical biosensor for the simultaneous determination of catechol and hydroquinone. A laccase biorecognition layer was deposited using an innovative soft plasma polymerization technique onto a multiwalled carbon nanotube (MWCNT)-modified glassy carbon electrode (GCE) to sufficiently separate catechol (CT) and hydroquinone (HQ) oxidation peaks. The electrochemical analysis carried out for MWCNTs with various morphologies was supported by density functional theory (DFT) calculations showing differences in the electronic structures of both dihydroxybenzene isomers and the MWCNTs forming the biosensor interlayer. The best biosensor peak separation and biosensor analytical parameters were observed for the device containing 75 μg of MWCNTs with a higher internal diameter. For this laccase-based biosensor, a linearity range from 0.1 to 57 μM for catechol and 0.5 to 57 μM for hydroquinone as well as a sensitivity of 0.56 and 0.54 μA/μM for catechol and hydroquinone was observed, respectively. The limit of detection (LOD) values were 0.028 and 0.15 μM for CT and HQ, respectively. This biosensor was also characterized by good selectivity, stability, and reproducibility. It was successfully applied for the quantification of contaminants in the analysis of natural water samples.

Study of carbon nanotube modified biosensor for monitoring total cholesterol in blood.

Study of Carbon Nanotube Modified Biosensors for Monitoring Uric Acid and Total Cholesterol in Blood

The Application of Carbon Nanotubes in Biosensor

A Pyrrole Quinoline Quinone Glucose Dehydrogenase Biosensor Based on Screen-Printed Carbon Paste Electrodes Modified by Carbon Nanotubes

Potassium-doped carbon nanotubes toward the direct electrochemistry of cholesterol oxidase and its application in highly sensitive cholesterol biosensor

Effect of Modification of a Laccase-Based Electrochemical Biosensor with Carbon Nanotubes on Signal Separation of Dihydroxybenzene Isomers

Carbon Nanotubes Modified Amperemetric Glucose Biosensor

Study on the determination of the bioactive constituents in traditional Chinese medicines based on carbon nanometrials

Electrochemical Biosensing Based On Carbon Nanotubes

Electrochemically deposited nanocomposite of chitosan and carbon nanotubes for biosensor application.

Carbon Nanotubes Based Glucose Needle-type Biosensor

Study of glucose and Uric Acid Biosensors Based on Screen-Printed Carbon Paste Electrodes Modified by Carbon Nanotubes

A layer-by-layer assembled and carbon nanotubes/gold nanoparticles-based bienzyme biosensor for cholesterol detection

A New Application of Carbon Nanotubes Constructing Biosensor

Recent Advances in Carbon Nanotube-Based Biosensors for Biomolecular Detection

Hive-shaped carbon nanotubes coated with MoSe2as an electrochemical sensor for cholesterol

Glucose biosensor based on multi-wall carbon nanotubes and screen printed carbon electrodes.

Non-Covalent Functionalization of Carbon Nanotubes for Electrochemical Biosensor Development

Biosensors Based on Carbon Nanotubes/Nickel Hexacyanoferrate/Glucose Oxidase Nanocomposites

Based on ionic liquid mediated carbon nanotube modified glassy carbon electrode

Capillary electrophoresis microchip with a carbon nanotube-modified electrochemical detector.