Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Performance Of Concrete Filled Steel Tube Reinforced Concrete (Cfstrc) Columns Subjected To Cyclic Bending

Low Cyclic Fatigue Performance of Concrete-Filled Steel Tube Columns

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Research on CFRP confined circular concrete-filled steel tubular columns subjected to cyclic lateral forces

Flexural behavior of concrete-filled circular steel tubes under high-strain rate impact loading

Experimental Behavior of Concrete-Filled Stainless Steel Tubular Columns under Cyclic Lateral Loading

Experimental Performance of Recycled Aggregate Concrete-Filled Circular Steel Tubular Columns Subjected to Cyclic Flexural Loadings

Combined Axial and Flexural Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Seismic Behavior of Steel Tube Confined RC Columns under Compression-Bending-torsion Combined Load

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Tests on cyclic performance of FRP–concrete–steel double-skin tubular columns

Influence of long-term loading on the performance of concrete-filled double skin steel tubular columns: Experiments

Concrete-filled Double Skin Steel Tubular (CFDST) Beam–columns Subjected to Cyclic Bending

Experimental research on concrete filled steel tube columns under combined compression-bending-torsion cyclic load

Performance Of Cfrp-Strenghtened Concrete Filled Steel Tubes Under Axial Compression

Axial Loading Behavior of Cfrp Strengthened Concrete-Filled Steel Tubular Stub Columns

Performance of Concrete-Filled Steel Tubes Subjected to Eccentric Tension

Experimental Studies On The Strength With High Slenderness Ratio Concrete Filled Steel Tubular Columns

Tests on elliptical concrete filled steel tubular (CFST) beams and columns

Cyclic and monotonic behaviour of steel-reinforced concrete-filled steel tubular columns

Analytical Behavior of Concrete-Encased CFST Columns under Cyclic Lateral Loading