Abstract:The flue gas desulfurization reactor by spray drying adsorption plays a crucial role in the process of gas purification. This study employed the multi-phase particle-in-cell method to accurately model the three-dimensional motion of particles of different sizes in the flue gas desulfurization reactor. The double-film theory was utilized to simulate the heat and mass transfer processes of desulfurization slurry droplets. Additionally, this study conducted a comprehensive analysis of various factors affecting gas-solid flow and mass transfer processes, including flue gas inlet velocity and temperature, Ca/S molar ratio, slurry particle size, and slurry temperature. The results demonstrate that the simulated and experimental results are in good agreement, validating the reliability of the developed model. The axial mass fluxes of gas and particles exhibit contrasting distributions in the central part and near the wall, with the turbulent viscosity being particularly pronounced in the top nozzle region. The inlet velocity of flue gas has a limited effect on the axial mass flux of particles, whereas the Ca/S molar ratio exerts a more significant influence. Furthermore, the Ca/S molar ratio has a substantial impact on the spatial distribution of flue gas temperature. The inlet velocity of flue gas and slurry particle size are negatively and positively correlated with particle residence time, respectively. Based on the mass transfer characteristics, the reactor interior can be divided into three zones: a high-efficiency desulfurization zone, a low-efficiency desulfurization zone, and a partial desulfurization zone. For the investigated operating conditions, the desulfurization efficiency is most strongly influenced by the slurry particle size, followed by the flue gas inlet velocity, Ca/S molar ratio, flue gas inlet temperature, and slurry temperature.

Study on Gas–liquid Two-Phase Spraying Characteristics of Nozzles for the Humidification of Smoke

EMULATIONAL AND EXPERIMENTAL STUDY OF NEW WATER MIST SPRAY NOZZLE FOR FIRE SUPPRESSION

Measurement of Atomization Characteristics on Water Mist Fire Suppression Nozzle

Study on Spray Condensation Performance of Desulfurization Wet Flue Gas

Experimental Study of the Atomizing Performance of a New Type of Nozzle for Coal Water Slurry

Experimental Study of the Removal of Fine Particulate Matter and Moisture from Flue Gas

Experimental Study of the Effect of Nozzle Structure on Atomizing Performance of a Novel Coal Water Slurry Nozzle

Study on Parameter Optimization of Desulfurized Wet Flue Gas in Spray Condensation Process

Experimental Study of Atomization and Spray Characteristics of Air-Assisted Coal Water Slurry Nozzle of High Fluid Loading

Experimental study on influence of multi-stage humidification on semi-dry flue gas desulfurization

Experimental Study on Combustion Desulfurization of Sludge Coal Water Slurry

The study of a lime slurry atomization nozzle and its characteristics

Atomization and Spray Characteristics of a Multi-Stage Airblast Nozzle for Coal-Water Slurry

Study on basic features of sludge coal water slurry

Study on the Atomization Characteristics of High-pressure Nozzle with an In-line Distributor

Numerical analysis of SO 2 removal characteristics in industrial flue gas desulfurization reactor by spray drying adsorption

Experimental and Numerical Simulation Studies on the Atomization Characteristics of the Internal Mixing Nozzle and Its Field Application

TEST AND RESEARCH OF IMPACT TYPE MUTISTAGE ATOMIZING NOZZLE FOR COAL-WATER SLURRY

Mass transfer process intensification for SO2 absorption in a commercial-scale wet flue gas desulfurization scrubber

Characteristic Study on Calcium and Sodium Based Spray-dry Desulfurization of Coke Oven Gas

Study on Spray Evaporation Treatment of Desulfurization Wastewater