Abstract:In this study, we investigated the effects of modified aging treatments on the microstructures and hardness in a commercial 6016 Al alloy through hardness tests and transmission electron microscopy (TEM) observations. The results demonstrate that many fine needle-like β′′ phases contribute to the high hardness of peak-aged (T6) alloys. Over-aging treatments lead to the precipitation of lath-like β′, β′′/disordered, or B′/disordered composite phases. Moderate over-aging treatment results in the coarsening of grain boundary precipitates (GBPs) and widening of the precipitate-free zone (PFZ), while heavy over-aging treatment triggers the re-precipitation of Cu-containing GBPs and increases the number density of GBPs. A retrogression and re-aging (RRA) treatment precipitates β′′, lath-like β′, and disordered phases, while a two-step aging (T78) treatment precipitates β′′, B′, and disordered phases. Both the T78 and the RRA treatments lead to the coarsening of GBPs and the widening of PFZs. The decreased hardness during over-aging treatments is attributed to a combination of coarsening intragranular precipitates and/or wider PFZs. The T78 and RRA tempers achieve 95.5% and 94% of the hardness values of the T6 treatment, respectively. The hardness values of the RRA and T78 treated alloys are related to the finer nano-sized precipitates formed during the high temperature process. These precipitates can compensate for the loss of hardness caused by the increase in the widths of the PFZs and the coarsening of the matrix precipitates. The relationship between the hardness and microstructures such as PFZs and precipitates in the matrix during various heat treatments is elucidated.

Aging Behavior of Sub-Micron Al2O3P/2024Al Composites

Age-Hardening Behavior in the Noble Metal Dental Casting Alloys

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Aging and Thermal Expansion Behavior of Si3N4p/2024Al Composite Fabricated by Pressure Infiltration Method

Rare-earth modification of sub-micron Al2O3 particle surface and its effect on the aging behavior of 6061Al composite

Effect of Aging Treatment on the Mechanical Properties of 45 vol.% SiCp/6061Al Composite

Effect of the interfacial reaction of aluminum and yttrium oxide on aging behavior of aluminum–magnesium–silicon alloy reinforced with yttrium oxide modified sub-micron alumina

In situ processing and aging behaviour of an aluminium/Al2O3 composite

Aging behavior and tensile properties of 6061Al–0.3 μm Al2O3p particle composites produced by reciprocating extrusion

Two-stage aging treatment to accelerate aging kinetics without impairing strength in B4C/7A04Al composite

Microstructures, mechanical properties, and aging behavior of hybrid-sized TiB2 particulate-reinforced 2219 aluminum matrix composites

The aging behavior, microstructure and mechanical properties of AlN/AZ91 composite

Study of changes in the aging process, microstructure, and mechanical properties of AA2024-AA1050 nanocomposites created by the accumulative roll bonding process, with the addition of 0.005 vol.% of alumina nanoparticles

Effect of aging treatment on microstructure and mechanical properties of Al matrix composite reinforced by in-situ intragranular Al 2 O 3

Effect of aging treatment on the microstructure and mechanical properties of TiO2@CNTs/2024 composite

Age-hardening behavior of the extruded Al 7075/Mg EW75 composite

Effects of Aging Treatments on the Age Hardening Behavior and Microstructures in an Al-Mg-Si-Cu Alloy

High strength Al<SUB>2</SUB>O<SUB>3p</SUB>/6061 Al composites: effect of particles, subgrains and precipitates

Microstructure and Mechanical Properties of Al–B 4 C Composite at Elevated Temperature Strengthened with in Situ Al 2 O 3 Network

The Influence of TiB2 Particles on the Artificial Aging Behavior of TiB2/Al–5Cu Composite

High Strength Al(2)O(3)P/6061 Al Composites: Effect Of Particles, Subgrains And Precipitates