Abstract:Highlights • A novel super wear-resistant coating for mg alloys was achieved via the new strategy of discontinuous deposition. • The wear resistance was exceptionally 5500 times superior to the base PEO coating. • The wear resistance was surprisingly 20 times superior to conventional continuous deposition. • The inducements of rolling friction, nano lubrication and the mixed wear of soft matrix and hard point result in the super wear resistance. Magnesium alloys are lightweight materials with great potential, and plasma electrolytic oxidation (PEO) is effective surface treatment for necessary improvement of corrosion resistance of magnesium alloys. However, the ∼14 μm thick and rough PEO protection layer has inferior wear resistance, which limits magnesium alloys as sliding or reciprocating parts, where magnesium alloys have special advantages by their inherent damping and denoising properties and attractive light-weighting. Here a novel super wear-resistant coating for magnesium alloys was achieved, via the discontinuous sealing (DCS) of a 1.3 μm thick polytetrafluoroethylene (PTFE) polymer layer with an initial area fraction (A f ) of 70% on the necessary PEO protection layer by selective spraying, and the wear resistance was exceptionally enhanced by ∼5500 times in comparison with the base PEO coating. The initial surface roughness (Sa) under PEO+DCS (1.54 μm) was imperfectly 59% higher than that under PEO and conventional continuous sealing (CS). Interestingly, DCS was surprisingly 20 times superior for enhancing wear resistance in contrast to CS. DCS induced nano-cracks that splitted DCS layer into multilayer nano-blocks, and DCS also provided extra space for the movement of nano-blocks, which resulted in rolling friction and nano lubrication. Further, DCS promoted mixed wear of the PTFE polymer layer and the PEO coating, and the PTFE layer (HV: 6 Kg/mm 2 , A f : 92.2%) and the PEO coating (HV: 310 Kg/mm 2 , A f : 7.8%) served as the soft matrix and the hard point, respectively. Moreover, the dynamic decrease of S a by 29% during wear also contributed to the super wear resistance. The strategy of depositing a low-frictional discontinuous layer on a rough and hard layer or matrix also opens a window for achieving super wear-resistant coatings in other materials.

A Protective Coating Formed in-situ on the Cylinder Bore in Presence of Mg<sub>6</sub>Si<sub>4</sub>O<sub>10</sub>(OH)<sub>8</sub>

Phase Structure and Lubricity of In-Situ Generated Protective Layer on Worn Metal Surfaces in Presence of Mg6Si4O10(OH)8

Multi-functional superhydrophobic coatings on mg Li alloys via SiO 2 nano particles assembled surface modification

Simultaneously Improved Corrosion/wear Resistances of Mg Alloy Through an Ultra-Thin Mg(OH)2/graphene-APTES Coating

Mineralogical Mechanochemical Agent Assisted Reconditioning Effects and Mechanism on Worn Ferrous Surfaces

Superior tribological and anti-corrosion performance of corrosion inhibitors intercalated LDH-MAO coating on AZ31 Mg alloys

Novel Mg2Zr5O12/Mg2Zr5O12–ZrO2–MgF2 Gradient Layer Coating on Magnesium Formed by Microarc Oxidation

Superlow Wear Realizable Tribofilms from Lubricant Oil Containing Hydrothermally Synthesized Magnesium Silicate Hydroxide/Carbon Core-Shell Nanoplates.

A super wear-resistant coating for Mg alloys achieved by plasma electrolytic oxidation and discontinuous deposition

Designing Organic-Inorganic Hybrid Coating from Composite and Structures for the Tribological Property and Corrosion Resistance of Mg Alloys

Sequentially Bridged Biomimetic Graphene-Based Coating Via Covalent Bonding with an Effective Anti-Corrosion/wear Protection for Mg Alloy

Generation and characterization of a protective layer on steel tribosurfaces in presence of Mg6Si4O10(OH)8

The auto-reconditioning protective layer on worn metal surface generated by internal oxidation under serpentine action

Design and in situ prepare a novel composite coating on Mg alloy for active anti-corrosion protection

A Robust Bno/Siloxane Composite Coating on Mg-Nd-Zn-Zr Alloys with Simultaneous Enhancement of Anti-Wear and Anti-Corrosion

Multi-layer Formation by Oxidation and Solid-State Crystallization of Cold Sprayed Amorphous Coatings During Dry Sliding Wear

Octadecyltrimethoxysilane modified freeze-drying magnesium silicate hydroxide towards high-performance wear-resistance: Synthesis, characterization, and tribological evaluation

Strengthening Mechanism of Nanosized Magnesium Silicate Hydroxide on the Tribological Properties of Phosphate-Bonded Solid Coatings

Nano Magnesium Silicate Hydroxide as Synergistic Lubricant Additive With Micro Carbon Sphere for Enhanced Tribological Properties

Friction and self-repairing behaviour of magnesium silicate hydroxide-MoS2 lubricant additives on gray cast iron with Cr-coated steel ball friction pairs

Competitive Surface Interactions of Critical Additives with Piston Ring/Cylinder Liner Components under Lubricated Breaking-In conditions