Abstract:The hydrogenation of nitrile butadiene rubber (NBR) has shown great potential for improving its physical, thermal, mechanical, and chemical stability. Hydrogenation process of NBR in this work involved the utilization of diimide produced from the interaction between hydrazine hydrate (N2H4) and hydrogen peroxide (H2O2), with the addition of boric acid as a promoter. Attenuated total reflectance Fourier transform infrared (ATR-FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and X-ray diffraction (XRD) were used to evaluate the degree of hydrogenation, glass transition, thermal stability, and rubber crystallinity, respectively. The highest hydrogenation degree was 99%, which resulted in a 57% gel content. Upon hydrogenation, both the glass transition temperature (Tg) and decomposition temperature (Td) increased. The hydrogenated rubber samples generally showed an amorphous state, except for the 99% hydrogenated sample, which displayed a semi-crystalline state. However, using diimide for direct hydrogenation yields a side reaction from the free radicals in the system, which leads to gel formation. Optimization was accomplished by employing the response surface methodology (RSM), which entailed manipulating parameters such as the total solid content (TSC) of NBR, reaction time, and the mole ratio of H2O2 to N2H4, to reduce the percentage of gel content. The RSM analysis identified the optimum reaction conditions as a 1:1 mole ratio of H2O2: N2H4 and 25% TSC, with a reaction time of 8 h, which yielded 32% gel content percentage, where a mole ratio of H2O2 to N2H4 and reaction time indicated a synergistic effect, whereas TSC denoted an antagonistic effect.

Hydrogenation of New Butadiene-Acrylonitrile-Butylacrylate Rubber and Its Heat Resistance

HYDROGENATED BUTADIENE-ACRYLONITRILE-BUTYLACRYLATE RUBBER AND ITS PROPERTIES

Hydrogenation of Carboxyl Nitrile Butadiene Rubber Latex Using a Ruthenium-Based Catalyst

New Method for Hydrogenating Nbr Latex

Direct Hydrogenation of Nitrile Butadiene Rubber Latex Using M41 Catalyst

Selective hydrogenation of nitrile-butadiene rubber catalyzed by thermoregulated phase transfer phosphine rhodium complex

Homogeneous catalytic hydrogenation of hydroxyl-terminated liquid nitrile rubber

Mechanism aspects of the hydrogenation of acrylonitrile on Ni and Pd surfaces

Homogeneous Hydrogenation Art of Nitrile Butadiene Rubber: A Review

Selective hydrogenation of nitrile butadiene rubber latex using Catmetium®RF 4 catalyst

Diimide-Mediated Hydrogenation of Nitrile Butadiene Rubber

Application of hydrogenated butadiene-nitrile rubbers for products operated at high temperatures and in aggressive environments

Selective Hydrogenation of Nitrile Butadiene Rubber (nbr) with Rhodium Nanoparticles Supported on Carbon Nanotubes at Room Temperature

Research on Mechanical Properties, Compatibility, Flame Retardancy, Hot-Air Ageing Resistance of Hydrogenated Nitrile-Butadiene Rubber/Chloroprene Rubber Blends

Modification of hydrogenated nitrile rubber with N,N′‐bismaleimide‐4,4′‐diphenylmethane to improve its resistance to heat aging and reduce its compression set

Effect of Carboxyl Group Introduction and Graft Modification on the Thermal Properties and Fe Wall Adsorption Performance of HNBR

Preparation of diene-based nanoparticles by semibatch microemulsion polymerization and their catalytic hydrogenation

Reaction Kinetic and Mechanistic Studies on Hydrogenation of NBR Catalyzed by Hydrogen Storage Alloy

Structure and Performance of Hydrogenated Natural Rubber Prepared by the Latex Method

Research progress of blending modification of hydrogenated acrylonitrile butadiene rubber

A Ternary Rh Complex Catalyst Highly Active and Stable in the Hydrogenation of Acrylonitrile–butadiene Rubber