Abstract:For the manufacture of frost-resistant oil and petrol-resistant rubber products, one of the most widely used rubbers is nitrile-butadiene rubber (NBR) with a low acrylonitrile content of 17–20 %. However, the technical properties of its vulcanizates do not always meet all high performance requirements. Therefore, the study of the possibility of improving the technical characteristics of vulcanizates based on frost-resistant NBR is an urgent task. This paper presents the results of studying nitrile-butadiene rubber BNKS‐18AMN filled with ultra-high molecular weight polyethylene (UHMWPE). A feature of this work is the study of the possibility of increasing the technical properties of the obtained elastomeric composites by increasing the interaction between chemically inert UHMWPE and BNKS‐18AMN using the chemical modification of UHMWPE. The modification of UHMWPE was carried out by chemical etching in a solution of chromic acid for 3 and 20 hours. A complex of laboratory studies of the obtained samples was carried out. The influence of the duration of chemical etching of UHMWPE on the rheological and vulcanization properties has been studied on the analyzer of the processing of rubber. It is shown that the filling of UHMWPE into BNKS‐18AMN, in general, leads to an increase in the viscosity of the rubber compound. Chemical etching of UHMWPE leads to a decrease in the rate of vulcanization and the density of the three-dimensional spatial structure of the vulcanizate. The study of the physical and mechanical properties in tension, wear resistance during abrasion and swelling in standard hydrocarbon liquid for testing rubbers SZR‐3 showed that chemical etching of UHMWPE leads to a decrease in strength characteristics, but at the same time leads to an increase in resistance to abrasion and has no significant effect on swelling. The study of changes in the properties of samples after heat exposure showed that chemical etching of UHMWPE significantly reduces the resistance to thermal oxidative destruction in the presence of atmospheric oxygen, but does not affect the resistance to thermal aging in the SZR‐3 hydrocarbon environment

Application of hydrogenated butadiene-nitrile rubbers for products operated at high temperatures and in aggressive environments

Research on Mechanical Properties, Compatibility, Flame Retardancy, Hot-Air Ageing Resistance of Hydrogenated Nitrile-Butadiene Rubber/Chloroprene Rubber Blends

Modification of hydrogenated nitrile rubber with N,N′‐bismaleimide‐4,4′‐diphenylmethane to improve its resistance to heat aging and reduce its compression set

Investigation of Mechanical Properties and Oil Resistance of Hydrogenated-Butadiene-Acrylonitrile-Rubber-Based Composites Across Various Temperatures

Hydrogenation of New Butadiene-Acrylonitrile-Butylacrylate Rubber and Its Heat Resistance

HYDROGENATED BUTADIENE-ACRYLONITRILE-BUTYLACRYLATE RUBBER AND ITS PROPERTIES

Thermal Aging of Hydrogenated Nitrile Rubber – Loss of Additives and Its Influence on Elasticity Maintenance

Synthesis of Low Temperature Resistant Hydrogenated Nitrile Rubber Based on Esterification Reaction

Influence of Silica (SiO2) Loading on the Thermal and Swelling Properties of Hydrogenated-Nitrile-Butadiene-Rubber/Silica (HNBR/Silica) Composites

Effect of Hydrothermal Aging on the Tribological Performance of Nitrile Butadiene Rubber Seals

Solvent Swelling-Induced Halogenation of Butyl Rubber Using Polychlorinated N-Alkanes: Structure and Properties

Quantitative exploration of the swelling response for carbon black filled hydrogenated nitrile rubber with three-dimensional solubility parameters

Morphological investigations on silica and carbon-black filled acrylonitrile butadiene rubber for sealings used in high-pressure H 2 applications

Effect of high-pressure hydrogen environment on the physical and mechanical properties of elastomers

Influence of Chemically Modified Ultra-High Molecular Weight Polyethylene on the Properties of Butadiene Nitrile Rubber

Thermomechanical properties of zirconium tungstate/hydrogenated nitrile butadiene rubber (HNBR) composites for low-temperature applications

Hydrogenation of Carboxyl Nitrile Butadiene Rubber Latex Using a Ruthenium-Based Catalyst

EFFECT OF HEATING ON STRUCTURAL PARAMETERS OF NITRILE BUTADIENE RUBBER IN THE PRESENCE OF CHLORINE-CONTAINING COMPOUNDS

Development of halloysite nanotubes reinforced chlorinated ethylene propylene diene monomer/chlorinated acrylonitrile butadiene rubber blends

Molecular chain orientation and mechanical properties of hydrogenated nitrile-butadiene rubbers with different acrylonitrile content and crosslink density

Hydrogenated Nitrile Butadiene Rubber and Hindered Phenol Composite. I. Miscibility and Dynamic Mechanical Property