Abstract:This work focused on the preparation of chlorinated nitrile rubber (Cl-NBR)/hydroxyapatite (HA) nanocomposites by an open two-roll mixing mill. The formation of nanocomposites was characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). The dielectric properties and flame retardancy of polymer nanocomposites were analyzed with special attention to the loading of HA nanoparticles. Diffusion and permeation properties of petroleum solvents through the prepared Cl-NBR/HA composites were also investigated in detail as a function of filler content, different temperatures and nature of solvent. The incorporation of HA in Cl-NBR has been endorsed by FTIR analysis. The XRD showed the crystalline peaks of HA in the polymer chain. SEM images revealed that the nanoparticles were uniformed distributed in the polymer network with spherically shaped particles. TGA results indicated that the thermal stability of nanocomposites was remarkably higher than the pure Cl-NBR and the thermal stability increases with the loading of nanoparticles. The dielectric study observed a decreasing dielectric constant with increasing frequency, and the maximum property was obtained for 7 phr HA filling in Cl-NBR. The flame resistance of the polymer composites was greatly enhanced by the incorporation of nanoparticles. The diffusion, sorption and permeation constants were found to decreased with increase in HA content. The solvent uptake decreases with the size of the penetrant molecules, and the mechanism of transport of Cl-NBR composite was anomalous in nature. The enthalpy and entropy changes of the nanocomposites were analyzed from the diffusion data. The composite containing 7 phr HA sample showed higher dielectric properties and better solvent resistance properties.

Development of halloysite nanotubes reinforced chlorinated ethylene propylene diene monomer/chlorinated acrylonitrile butadiene rubber blends

Study on the Effect of Halloysite Nanotubes on the Mechanical Properties and Swelling Resistance of Ethylene-Propylene Diene Monomer (EPDM)/Nitrile Butadiene Rubber (NBR) Blend Nanocomposites

Effect of complex of resorcinol and hexamethylenetetramine modified halloysite nanotubes (RH-HNTs) on the mechanical and swelling characteristics of NR/EPDM nanocomposites

Halloysite Nanotubes (HNTs)-Filled Ethylene-Propylene-Diene Monomer/Styrene-Butadiene Rubber (EPDM/SBR) Composites: Mechanical, Swelling, and Morphological Properties

Effect of HNTs and Modified HNTs Nanotubes on the Mechanical Properties and Swelling Resistance of EPDM/SBR Rubber Blend Nanocomposites

Studies on the role of hydroxyapatite nanoparticles in imparting unique thermal, dielectric, flame retardancy and petroleum fuel resistance to novel chlorinated EPDM/chlorinated NBR blend

Enhancement of Mechanical Performance and Swelling Resistance in Silicone Rubber Through Reinforcement with γ-Methacryloxypropyltrimethoxysilane-Modified Halloysite Nanotubes

Acrylic Rubber-Reinforced Halloysite Nanotubes/Carbon Black Hybrid Fillers for Oil Seal Applications: Thermal Stability and Dynamic Mechanical Properties

Influence of halloysite nanotubes on mechanical and swelling properties of silicone rubber compound

Morphology, Interfacial Interaction and Properties of Styrene-Butadiene Rubber/Modified Halloysite Nanotube Nanocomposites

Influence of APTES Modified HNTs on Properties of NR/EPDM Nanocomposites

Styrene-Butadiene Rubber/Halloysite Nanotubes Composites Modified by Epoxidized Natural Rubber

Influence of Modified Nanosilica on the Performance of NR/EPDM Blends: Cure Characteristics, Mechanical Properties and Swelling Resistance

Expanded bentonite clay by bio-adhesive resins and its impact on the mechanical, adhesion, and ultrasonic properties of NR/SBR/polyester cords systems

The use of a hybrid consisting of tubular clay and graphene as a reinforcement for elastomers

Investigation of preparation for reactive halloysite loading ZDMA and its thermo-oxidative resistance on the HNBR/FKM composites

Interfacial Mechano-Chemical Grafting in Styrene-Butadiene Rubber/halloysite Nanotubes Composites

Preparation, structure and properties of nitrile–butadiene rubber–organoclay nanocomposites by reactive mixing intercalation method

Fabrication, characterization, dielectric properties, thermal stability, flame retardancy and transport behavior of chlorinated nitrile rubber/hydroxyapatite nanocomposites

Manufacturing and Joining PP/NBR Blends in the Presence of Dual Compatibilizer and Halloysite Nanotubes

Co-Compatibilising Effect of Carbon Nanotubes and Liquid Isoprene Rubber on Carbon Black Filled Natural Rubber/Polybutadiene Rubber Blend