Abstract:<span>Multiwalled carbon nanotube (MWCNT) are widely used as reinforcing fillers for rubber materials due to their excellent mechanical, thermal and electrical properties. However, the MWCNT dispersion in the rubber matrix is normally poor owing to their high aspect ratio and agglomeration characteristics. In this paper we describe our research on natural rubber latex (NRL) composites filled with noncovalent modified multiwalled carbon nanotube (MWCNT), prepared by sodium methylene bis-naphthalene sulfonate (NNO) as an anionic surfactant. The high-performance NRL/NNO/MWCNT composites were prepared by a liquid latex blending method. Transmission electron microscopy (TEM) showed the dispersion of MWCNT modified by NNO in water was significantly improved. The original MWCNT dispersion state in the water was not sufficient, with a range of small to big agglomerates. On the other hand, the entangled bundles of NNO/MWCNT were reduced in size or eliminated. The NNO's interface interaction with the MWCNT was further studied by Raman spectroscopy and thermogravimetric analysis (TGA) which indicated the NNO was capable of modifying the surface of the MWCNT. In addition, the effects of the modified MWCNT on the mechanical and dynamic mechanical properties of rubber composites were also characterized. NNO was absorbed on the surfaces of the MWCNT through noncovalent action, which enabled the MWCNT to more evenly disperse in the rubber matrix, forming a good filler structure in the NRL and improving their composites mechanical properties. We note our approach is an easy and eco-friendly method to enhance the NRL composites.</span>

Enhanced Mechanical, Dielectric, Electrical and Thermal Conductive Properties of HXNBR/HNBR Blends Filled with Ionic Liquid-Modified Multiwalled Carbon Nanotubes

Synergistic Effects of Hybridization of Carbon Black and Carbon Nanotubes on the Mechanical Properties and Thermal Conductivity of a Rubber Blend System

Effect of ionic liquid modified carbon nanotubes on the properties of nitrile butadiene rubber and nitrile butadiene latex nanocomposites

Thermal Conductivity of Natural Rubber Nanocomposites with Hybrid Fillers

Enhanced Mechanical Properties of Natural Rubber by Block Copolymer-Based Porous Carbon Fibers

Influence of Partial Substitution for Cb with Mwnts on Performance of Cb-Filled Nr Composites

Elastomer nanocomposites containing MXene for mechanical robustness and electrical and thermal conductivity

Preparation and Characterization of High-Performance Natural Rubber Latex Composites with Sodium Methylene Bis-naphthalene Sulfonate Modified Multiwalled Carbon Nanotubes

Natural rubber nanocomposites: effect of carbon black/multi-walled carbon nanotubes hybrid fillers on the mechanical properties and thermal conductivity

Study on the Effect of Halloysite Nanotubes on the Mechanical Properties and Swelling Resistance of Ethylene-Propylene Diene Monomer (EPDM)/Nitrile Butadiene Rubber (NBR) Blend Nanocomposites

Carbon Nanotubes- Filled Thermoplastic Polyurethane- Urea And Carboxylated Acrylonitrile Butadiene Rubber Blend Nanocomposites

The Effect of High Loaded Multiwall Carbon Nanotubes in Natural Rubber and Their Nonlinear Material Constants

Effects of Amino‐functionalized Carbon Nanotubes on the Properties of Amine‐terminated Butadiene–acrylonitrile Rubber‐toughened Epoxy Resins

Enhancing properties of natural rubber nanocomposites with hybrid fillers and ionic liquid

New Fabrication and Mechanical Properties of Styrene-Butadiene Rubber/Carbon Nanotubes Nanocomposite

Conductive epoxidized natural rubber nanocomposite with mechanical and electrical performance boosted by hybrid network structures

Effect of HNTs and Modified HNTs Nanotubes on the Mechanical Properties and Swelling Resistance of EPDM/SBR Rubber Blend Nanocomposites

Development of halloysite nanotubes reinforced chlorinated ethylene propylene diene monomer/chlorinated acrylonitrile butadiene rubber blends

Effect of complex of resorcinol and hexamethylenetetramine modified halloysite nanotubes (RH-HNTs) on the mechanical and swelling characteristics of NR/EPDM nanocomposites

Morphology and Microwave-Absorbing Performances of Rubber Blends with Multi-Walled Carbon Nanotubes and Molybdenum Disulfide

Influence of halloysite nanotubes on mechanical and swelling properties of silicone rubber compound