Abstract:The gas-solid flow in a three-dimensional slot-rectangular spouted bed is numerically investigated under the parallel framework of the computational fluid dynamics-discrete element method coupling approach. The fluid phase is solved with the k-epsilon turbulence model at the computational grid level, while the solid phase is tracked individually with the discrete element method at the particle scale. Millions of particles are calculated using a total number of 112 CPUs in a cluster. The predicted pressure drop profiles and the minimum spouting velocities of the calculations under different bed heights agree well with the experimental data. The startup procedure and the solid flow pattern are identified. Then, wall effects on the distribution properties of the gas-solid hydrodynamics are explored. Moreover, the interaction between spout and annulus and the effects of the superficial velocity and bed height on the bed hydrodynamics are discussed. The results show that a larger pressure drop appears in the system with a higher bed height. A bubble with its shape influenced by the slot geometry is formed in the startup procedure. Moreover, the bed hydrodynamics show a strong 3-D behavior along the depth direction. Large vertical solid flux mainly concentrates in the central region of the spout. The spout-annulus interface is dramatically influenced by the slot shape and shows different evolutionary tendencies in the different directions, and this influence becomes weaker along the bed height. The larger the superficial velocity is, the higher the bed height and the larger the spouting height appear. Besides, solid flow patterns under different bed heights with the superficial velocity the same ratio to the corresponding minimum spouting velocity show a similar behavior.

Experimental and numerical simulation of discrete liquid flow in a packed bed

Novel Bubble–Emulsion Hydrodynamic Model for Gas–Solid Bubbling Fluidized Beds

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Numerical simulation for character of fluid flow through packed bed

Flow Regime Transition and Liquid Distribution in a 3D Concurrent Downflow Three-Phase Moving Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Experimental Study of Bubble Dynamics and Flow Transition Recognition in a Fluidized Bed with Wet Particles

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

Hydrodynamics of Gas–liquid Flow in Micropacked Beds: Pressure Drop, Liquid Holdup, and Two‐phase Model

A Generalized Coupled Level Set/volume-of-fluid/ghost Fluid Method for Detailed Simulation of Gas-Liquid Flows.

A quasi-three-phase approach for simulating gas-solid fluidized bed under different flow patterns

Liquid–liquid mass transfer and pressure drop behavior in micro‐packed beds with different shaped packings

Discrete particle simulation of two-dimensional fluidized bed

Dispersion behavior of liquid–liquid and gas–liquid two‐phase flow in micro‐packed beds

Particle-resolved simulations and measurements of the flow through a uniform packed bed

Three-Dimensional Modeling of Gas–Solid Motion in a Slot-Rectangular Spouted Bed with the Parallel Framework of the Computational Fluid Dynamics–Discrete Element Method Coupling Approach

Numerical Simulation of a Packed Bed Reactor with Novel Internals—Ⅰ. Flow Field and Residence Time Distribution of Gas Phase

Experiment and Simulation Using Diffusion Flux Model for Gas-Particle Two-Phase Flow in a Suspension Bed