Abstract:Silicon and germanium are waveguide core materials for Si-based Group-IV integrated photonic circuit applications in the mid-infrared (MIR) wavelength range defined here as 2 to 15 um. In particular, Si and Ge are transparent up to 8 and 15 μm respectively, thus offering applications in communications and the sensing of biochemical, medical, and environmental variables [1]. The major problem with the MIR transition is that the most dominant platform of SOI can be used only up to 4 μm due to the high absorption loss of silicon dioxide. Therefore alternative material platforms have to be utilized for longer wavelengths. Presently, the Ge-on-Si platform (known as GOS) has been demonstrated to be workable to 15 μm-thereby offering potential for MIR applications. However, the refractive index contrast between Ge (n=4.1) and Si (n=3.4) is considerably less than that of SOI. As a result, the bend radii in GOS must be considerably larger than those in SOI, causing the footprint of GOS on-chip sensor circuits to be generally larger than those of SOI, an unwanted increase in “real estate.” What is wanted is a better alternative Ge-waveguide platform that will provide a larger core-clad index contrast than GOS as well as useful transparency and smaller channel-bend radii. To achieve those goals, the new structure proposed and realized here is Germanium on Silicon Nitride (Ge-on-Si3N4) which is referred-to here as GON. The refractive index of silicon nitride is 2.4 and it is transparent up to ~7 μm. So the index contrast in GON is 1.7 compared to 0.7 in GOS. Our simulation results show that this structure can provide a more compact integrated network whose bend radii are only a few μm. Most importantly, we have developed a new and practical wafer bonding and layer transfer technique, reported here, to realize GON.

Subwavelength Silica-Based Optical Waveguide with a Multilayered Buffer for Sharp Bending

Waveguide Bends from Nanometric Silica Wires

Subwavelength-diameter Silica Wire for Light In-Coupling to Silicon-Based Waveguide

Subwavelength-diameter Silica Wires for Microscale Optical Components

Single-mode Guiding Properties of Subwavelength-Diameter Silica and Silicon Wire Waveguides.

Deeply Etched $\hbox{sio}_{2}$ Ridge Waveguide for Sharp Bends

A Minimized SiO $_{2}$ Waveguide with an Antiresonant Reflecting Structure for Large-Scale Optical Integrations

Low-Index-Material-Based Nano-Slot Waveguide with Quasi-Bragg-Reflector Buffer

Silicon-on-Insulator Waveguide Devices for Broadband Mid-Infrared Photonics

Modeling and Fabrication of Ge-on-Si3N4 for Low Bend-Loss Waveguides

Mid-infrared Nonlinear Silicon Hybrid Waveguide with High Figure of Merit

Low Loss Sharp Bend for Silicon Nanophotonic Slow-Light Waveguide

A Small Polymeric Ridge Waveguide with a High Index Contrast

Low-loss 3-dimensional waveguide crossing with a parabolic taper interlayer coupler based on a SiN-SiN-Si three-layer platform

Ultra-thin silicon-on-insulator waveguide bend based on truncated Eaton lens implemented by varying the guiding layer thickness

SiN-SOI Multilayer Platform for Prospective Applications at 2 Μm

Very Sharp Adiabatic Bends Based on an Inverse Design.

Bent silicon slot waveguides with both low loss and low nonlinearity

Ultra Sharp Curved Waveguide Design Based on Topology Optimization

Analysis of 90° bend photonic crystal waveguide: an application to optical interconnect

Ultra-Compact Silicon-Based 180-Degree Waveguide Bend Using Digital Metamaterials