Abstract:The trade-off between the safety and effectiveness of NiTi wire in practical applications has consistently hindered its advancement. This underscores the significance of adjusting its microstructure via appropriate heat-treatment techniques. This study systematically investigates the evolution of the constitution phases of the matrix and the grain size as the aging time increases from three minutes to three hours at 550 °C for Ni50.9Ti49.1 wire, and highlights the significant role of the R phase in static/cyclic tensile failure behavior. When aged for thirty minutes, the matrix consists mainly of the B2 phase, similar to the as-received wire, while it tends to transform into the R phase during loading (intermediate-R phase). In contrast, aging for three hours leads to the formation of the R phase as the matrix phase (matrix-R phase). The two types of R phase are discussed and compared in detail with regard to their contribution to the static/cyclic tensile failure behaviour. The longest fatigue life was obtained in wires with the R phase as the matrix phase, which was due to the combined effect: (i) the rapid attainment of a stable state so as to minimise the extent of phase transformation; (ii) coordination deformation of twin and dislocation to alleviate stress concentration; (iii) and the strong bonding between Ti2Ni and the matrix that reduces the occurrence of the "stretching into the hole-coalescence-microcrack process". The enhanced flexibility observed in the wire with matrix-R phase is due to its reduced elastic modulus and lower transformation plateau. The increase in plasticity is linked to changes in the wire's fracture behavior resulting from grain growth. Such microstructural changes allow the alloy wire to exhibit a more uniform plastic deformation under stress, which in turn postpones the onset of significant fracturing.

Strain Aging of Heavily Drawn Pearlitic Steel Wires

The influence of aging on the mechanical property of a cold drawn pearlite steel

Characterization of the Microstructure in Drawn Pearlitic Steel Wires

Microstructural Evolution, Strengthening Mechanisms and Strength Structure Relationship in Cold-Drawn Pearlitic Steel Wire

Effect of Microstructure and Microtexture on the Mechanical Properties of Small-Strain Cold-Drawn Pearlite Steel Wires

INTERNAL FRICTION STUDY ON THE AGING PROCESS OF DRAWN PEARLITE STEEL

The Influence of Strain Aging at Different Temperatures on the Mechanical Properties of Cold-Drawn 10B21 Steel Combined with an Electron Microscope Study of the Structures

Relating Residual Stress and Microstructure to Mechanical and Giant Magneto-Impedance Properties in Cold-Drawn Co-based Amorphous Microwires

Experimental Analysis of Wire Drawing Influence on Microstructure, Texture, and Mechanical Properties of High‐Carbon Steel for Prestressing Strand

Dislocation-Based Plasticity and Strengthening Mechanisms in Sub 20 Nm Lamellar Structures in Pearlitic Steel Wire

Unveiling Thermal and Athermal Effects in Strain Hardening Removal of A6061 Aluminum Alloy

Microstructural Dependence of Anisotropic Fracture Mechanisms in Cold-Drawn Pearlitic Steels

Cementite Deformation and Dissolution in a Cold-Drawn Pearlitic Steel Wire

EFFECTS OF HIGH-DENSITY CURRENT PULSES ON WORKHARDENING BEHAVIORS OF AUSTENITE STAINLESS STEELIN WIRE-DRAWING DEFORMATION

Factors Affecting Kinetics of Strain Aging in S275JRC Steel

Microstructure and Properties of Pearlitic Steel during Cold Wire Drawing: A Residual Stress Perspective*

Residual Stress in the Cementite Phase of Cold Drawn Pearlite*

EVOLUTIONS OF MICROSTRUCTURE AND FERRITIC MICRO--ORIENTATION AND TEXTURE IN A PEARLITIC STEEL WIRE DURING COLD DRAWING

Influence of Tempering on Macro- and Micro-Residual Stresses and Yield Stress of Ferritic-Pearlitic Drawn, Coiled, and Straightened Wires

Investigation of the Ageing-Induced R-phase and Its Impact on Static/cyclic Tensile Failure in Ni50.9Ti49.1 Wire

Hardening and Softening Behavior of Caliber-Rolled Wire