Abstract:We have attempted to apply the computer-based finite element analysis (FEA) method to accurately measure the mechanical properties (e.g., hardness and elasticity) of a soft material by an indentation test. First, an axisymmetric model has been developed using commercially available FEA code ANSYS. The FEA model consisted of a thin Al-film resting on Si-substrate. A spherical indenter has been used to indent the Al-film, which traveled a predefined depth during the loading and unloading cycles. First, numerical simulations were conducted to get the force vs. displacement plot, which was later used to determine the modulus of elasticity and hardness of Al-film. The effects of substrate modulus and indentation depth were thoroughly investigated to determine the modulus and hardness of Al-film. The effect of friction, considered at the interface of indenter and Al-film, was found to offer minimum impact for relatively small indentation depth. The induced force on the Al-film by the indenter has been found to be higher with increasing indentation depth when friction was considered. However the contact stiffness, represented by the slope of the unloading curve, has been found almost the same with and without considering friction. The variation of substrate modulus has been found to be ineffective to capture the Al-film modulus for relatively small indentation depth. However for higher indentation depth, the substrate modulus has been found to offer profound effect to capture the film modulus. The hardness of the Al-film has also been found to be relatively unaffected with variation of substrate modulus. However, the hardness of the Al-film has been found to be higher with friction for relatively high indentation depth. Results obtained from this preliminary research are important to continue further investigation and to characterize the mechanical properties of other soft-materials, e.g., biofilms to minimize its detrimental effects and utilize its favorable aspects in industrial and biomedical applications.

Analysis of Continuous Stiffness Data Measured During Nanoindentation of Titanium Films on Glass Substrate

Determination of the Thickness of Titanium Films on Glass Substrate by Nanoindentation Tests

Measuring elastoplastic properties of thin films on an elastic substrate using sharp indentation

Identifying the elastoplastic properties of ductile film on hard substrate by nanoindentation

In Situ Nanoindentation Mechanical Property of Films by Atomic Force Microscope

Correction of Substrate-Induced Thin-Film Modulus Deviations in Nanoindentation Measurements

Relationship of Stiffness-Based Indentation Properties Using Continuous-Stiffness-Measurement Method

Description of the Nanoindentation Unloading Curves with a Universal Function: Theoretical Consideration and Applications to Brittle Materials

Indentation stress–strain analysis and finite element simulation to determine elastoplastic properties of thin films decreasing the substrate contribution

Finite Element Analysis of the Nanomechanics of Hard Coatings on a Soft Polymer Substrate by a Spherical Indenter

A Universal Function for the Description of Nanoindentation Unloading Data: Case Study on Soda-Lime Glass

Finite Element Analysis of Nanoindentation Responses in Bi2Se3 Thin Films

Nano-Indentation for Characterizing Mechanical Properties of Soft Materials

Determining the constitutive behavior of nonlinear visco-elastic-plastic PMMA thin films using nanoindentation and finite element simulation

Accurate measurement of thin film mechanical properties using nanoindentation

Mechanical responses and plastic rheological behavior of Ti–Zr-Hf-Co-Ni-Cu metallic glass thin films deposited with different substrate temperatures during nanoindentation and nanoscratch process

Effects of surface energy and substrate on modulus determination of biological films by conical indentation

Effect of Surface Roughness on Nanoindentation Test of Thin Films

Identifying the Viscoelastic Properties of Soft Matter from the Indentation Response of a Hard Film-Soft Substrate System

Effect of Grain Curvature on Nano-Indentation Measurements of Thin Films

Microstructure Evolution-Dominated Mechanical Properties of Pure Titanium under Nanoindentation