Abstract:Most existing buildings are not equipped with long-term monitoring system. For the structural model updating and damage detection of this type of structures, ambient vibration test is popular as artificial excitation is not required. This article presents in detail the full-scale ambient vibration test, operational modal analysis, and model updating of a tall building. To capture the dynamic properties of the target 20-story building with limited number of sensors, a 15-setup ambient vibration test was designed to cover at least three measurement points (each consists of a vertical and two orthogonal horizontal measured degrees of freedom) for each selected floor. The modal parameters of each setup were extracted from the measured acceleration signals using a frequency domain decomposition method and were combined to form the global mode shape through the least-squares method. Due to the regularity of the building, a simple class of shear building models was employed to capture the dynamic characteristics of the building under lateral vibration. The identified modal parameters of the building were employed for the model updating of the shear building model to identify the distribution of inter-story stiffness. Since the “amount” of the measured information is small when compared to the “amount” of required information for identifying the uncertain parameters, the model updating problem is unidentifiable. To handle this problem, the Markov chain Monte Carlo–based Bayesian model updating method is employed in this study. The identified modal parameters revealed interesting features about the dynamic properties of the building. The well-matched results between model-predicted and identified modal parameters show the validity of the shear building model in this case study. This study provides valuable experience in the area of structural model updating and structural health monitoring.

Model updating experiment of space truss using global and local dynamic information

An experimental study on large-span spatial cable-truss tensile structure model

The model experimental research on rib-patterned large-span spatial cable-truss tensile structure with annular plane

Vulnerability Assessment and Failure Scenarios Identification of Truss Structures

New judgment method on dynamic instability of truss structures: stress rate method

Influence of torsion stiffness of spatial truss string system on structural stability

Structural modal identification and MCMC-based model updating by a Bayesian approach

Model Updating and Damage Detection Using Cross Model Cross Mode Method for 3D Frame Structures

Bayesian model updating of a 20-story office building utilizing operational modal analysis results

Assessing Key Structural Stiffness of Existing Space Trusses Based on Optimized Simple Static Loadings

Experimental Study Of Nonlinear Dynamics Of A Space Deployable Truss Structure With Clearance Connections

A Two-Stage Model Updating Method for the Linear Parts of Structures with Local Nonlinearities

Vibration-based Bayesian model updating of an actual steel truss bridge subjected to incremental damage

Bio-based hybrid planar truss: Experimental testing, FE modeling and Bayesian model updating

Research on systemic method of dynamic model updating concerning aerospace structural

Finite Element Model Updating of Canton Tower Using Regularization Technique

A Substructure-based Model Updating Method to Damage Detection for Large-scale Structures

Finite Element Model Updating of Guangzhou Television and Sightseeing Tower Using Regularization Technique

Hierarchical Model Updating Strategy of Complex Assembled Structures with Uncorrelated Dynamic Modes

Numerical Model Updating and Validation of a Truss Railway Bridge considering Train‐Track‐Bridge Interaction Dynamics

Updating numerical models towards time domain alignment of structural dynamic responses with a limited number of sensors