Abstract:Molten lead (Pb) and its alloys (PbBi and PbLi) are of immense interest for various nuclear engineering applications, including but not limited to advanced Lead-cooled Fast Reactors (LFRs), tritium Breeding Blankets (BBs) of fusion power plants and spallation targets for Accelerator-Driven Systems (ADS). Owing to their attractive thermophysical properties, these advanced fluids assert their candidacy to address the critical requirements of neutron multiplication, neutron moderation, high temperature coolants and tritium breeders, enabling the operation of next generation nuclear systems at high temperatures with better efficiencies. However, for numerous reasons such as a compromise of structural integrity at the heat transfer interface, presence of an inert cover gas during charging of molten metal in the loop, and the fusion fuel cycle itself may lead to molten metal-gas two-phase flows with high density ratios. At present, no effective diagnostics exist to detect such operational and accidental occurrences in high temperature molten metal systems resulting in a severe lack of relevant experimental studies. To address these limitations and to advance the current understanding toward two-phase regimes in high temperature Pb-based melts, the present work focuses on the design and assembly aspects of an electrical conductivity-based two-phase detection sensor array, utilizing high purity α-Al 2 O 4 coatings with AlPO 4 binder as electrical insulation layers. This paper discusses the design considerations, thermal analysis, systematic selection of structural/functional components along with preliminary results from the probe performance tests in very high temperature (600°C) static molten Pb column for real time detection of argon gas bubbles rising within the melt. Quantitative estimations of time-averaged void fraction, average bubble impaction frequency and average bubble residence time are presented from the preliminary experimental investigations.

Experimental Investigation on Contact Angles of Molten Lead–Lithium on Silicon Carbide Surface

Contact Angle Measurement of Molten Lead-Lithium on Silicon Carbide Surfaces

Laminar mixed convection heat transfer of SiC-EG nanofluids in a triangular enclosure with a rotating inner cylinder: simulations based on the measured thermal conductivity and viscosity

Consideration of Alumina Coating Fabricated by Sol-gel Method as MHD Coating against PbLi

Electrical insulation test of alumina coating fabricated by sol–gel method in molten PbLi pool

Consideration of Alumina Coating Fabricated by Sol–Gel Method for PbLi Flow

Ultrasonic Doppler Velocimetry Experiment of Lead-Lithium Flow with Oroshhi-2 Loop

Experimental Investigation on Liquid-Metal Flow Distribution in Insulating Manifold under Uniform Magnetic Field

Experimental Measurements for the Effective Thermal Conductivity of Pebble Beds with Uncertainty Analysis

Experimental Investigation on the Leidenfrost Phenomenon of Droplet Impact on Heated Silicon Carbide Surfaces

ACOUSTIC PROPERTIES OF Pb-17Li ALLOY FOR ULTRASONIC DOPPLER VELOCIMETRY

ICONE19-43372 Numerical Simulation of Opposing Mixed Convection Heat Transfer of Lithium-Lead in a Vertical Square Channel with Heat Source

Design, fabrication and validation of an electrical conductivity principle based two-phase detection sensor array for molten lead (Pb) based heavy metal coolants up to 600^∘C

Experimental Study of Molten Lithium Droplet and Coolant Interaction at Different Temperatures

Wetting and Interfacial Behavior of Molten Al on Mo-Ni(Co)-Si Coated SiC Ceramic

Numerical Investigation of Buoyant Effect on Flow and Heat Transfer of Lithium–Lead Eutectic in DFLL–TBM

A sessile drop approach for studying 4H-SiC/liquid silicon high-temperature interface reconstructions

MEASUREMENTS OF FINE STRUCTURES IN THE LEAD-BISMUTH EUTECTIC ALLOY MELTS BY DIFFERENTIAL SCANNING CALORIMETRY

Numerical Analysis Of Forced Convection Heat Transfer In First Wall Rib-Roughened Channels For Liquid Lithium Lead Blanket

Magnetohydrodynamic Effects on Liquid Metal Film Flowing along an Inclined Plate Relating to Plasma Facing Components

Experimental Study on Molten Corium-Concrete Interaction with Simulant Metal and Oxide