Abstract:As optical networks advance toward a dynamic multiwavelength all-optical structure, all optical wavelength conversion technologies become vital in the efficient utility of available fiber bandwidth. Experimental demonstrations of optical wavelength conversion usually involves a nonlinear element to transfer the information from the signal wavelength to that of a local laser source. In the case of Non-return-to-zero (NRZ) signals, the local laser source is usually a CW narrow linewidth semiconductor laser. For Return to Zero (RZ) signals, the local laser sources commonly employ a modelocked fiber laser or a modelocked semiconductor laser or a gain switched DFB to generate low jitter optical clock. Various materials and devices can be used as the nonlinear element for wavelength conversion, with the two most common being the optical fiber and semiconductor optical amplifier, though Lithium Niobate has also attracted attention in recent years as a switching element. The advantage of using optical fiber for wavelength conversion is that it is relatively cheap and has low levels of noise. However, the switching energy required to generate the nonlinearity in optical fiber is high compared to that of the SOA [1]. Wavelength conversion using SOA typically uses either four-wave mixing or crosses gain/phase modulation, with the latter method often used in conjunction with an interferometric topology [2]. The advantages of cross phase modulation of SOA in interferometers are the relatively low switching energy required, the fast switching speed, and the ability to integrate the whole structure on a single substrate.

Simultaneous Clock Component Extraction and Wavelength Conversion of NRZ Signal Using an SOA Loop Mirror

Experimental Demonstration of Clock Component Extraction of NRZ Signal Using SOA Loop Mirror

Wavelength Conversion Using SOAs: Simulations and Experiment

All-optical High Performance Microwave Oscillator with Enhanced Modulation Efficiency Based on SOAs

All-optical Format Conversion from NRZ to CSRZ and Between RZ and CSRZ Using SOA-based Fiber Loop Mirror

All-optical NRZ Wavelength Conversion Based on a Single Hybrid III-V/Si SOA and Optical Filtering.

Simulation And Design Of Monolithically Integrated Tunable Wavelength Converter Based On V-Cavity Laser And Delayed Mach-Zehnder Interferometer

Patterning Effect Mitigation Using Complementary Data for NRZ Wavelength Conversion with a SOA-MZI

Numerical Simulation of All-Optical Wavelength Conversion of DPSK Signal Based on SOA in a Mach-Zehnder Configuration

All- Optically Doubling Clock Frequency of NRZ Signal Based on Nonlinear Fiber- Loop Mirror

Low-Phase-Noise Clock Recovery from NRZ Signal and Simultaneous NRZ-to-RZ Format Conversion

Optical Signal Processing Based on Semiconductor Optical Amplifier and Tunable Delay Interferometer

All-optical Clock Extraction for CSRZ Modulation Data

Optical Clock Extraction And Self-Routeing Using A Semiconductor Nonlinear Multilayer Structure

All-optical frequency multiplication/recovery based on the semiconductor optical amplifier ring cavity

Optimizing Clock Enhancement to Achieve Modulation-Format-Independent All-Optical Clock Recovery

100-GHz wavelength-tunable all-optical clock recovery with Fabry-Perot filter and semiconductor optical amplifier

Using Signal Pre-Distortion to Enhance the Performance of All-Optical Clock Recovery

Optimization and Evaluation of an All-Optical NRZ-to-CSRZ Format Converter Using SOA-based Fiber Loop Mirror

All-optical wavelength conversion of short pulses and NRZ signals based on a nonlinear optical loop mirror

All-Optical Clock Recovery from Non-Return to Zero Data Stream Based on Semiconductor Optical Amplifier and Stimulated Brillouin Scattering