Abstract:Metal matrix composites reinforced with discontinuous reinforcement (short fiber, whisker or particle) are attractive for applications requiring higher stiffness and strength than traditional alloys. Unlike continuously reinforced composites, where the properties are mainly influenced by fibers, the properties of the discontinuously reinforced composites seem to be influenced more by matrix properties. Most of the discontinuously reinforced composites are based on age-hardenable light alloys, so that aging treatments can be applied to develop the optimum properties of the composites. The aging behavior of discontinuously reinforced composites has been a subject of great interest both from scientific and technological view points. Recently developed NZ30K (Mg-3wt.%Nd-0.5wt.%Zn-0.5wt.%Zr) alloys exhibit higher specific strength at both room and elevated temperatures, better strength and creep resistance than the existing commercial magnesium alloys. Accordingly, this alloy can be considered as a candidate material for potential automobile applications, such as engine blocks and pistons, which experience high service temperature. Its use could save considerable mass weight in powertrain systems. However, low elastic modulus and wear resistance of magnesium alloys limit their widespread applications. Metal matrix composites have been proposed as the feasible and economical solution. The aim of this study is to investigate the effect of alumina fibers on the aging hardening kinetics and age-hardening efficiency of squeeze cast NZ30K/Saffil/15p magnesium matrix composite. The aging behavior has been examined using Vickers, combined with microstructure observation developed during heat treatment by optical microscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

Microstructure and Properties of M40 Carbon Fibre Reinforced Mg-Re-Zr Alloy Composites

Microstructure and Mechanical Properties of M40/AZ91 Composites Fabricated by Pressure Infiltration Method

Effect of SiC Particle on Microstructure and Properties of M40/ZM6 Composites

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Mechanical Properties, Aging Behavior and Microstructure Evolution of Mg-Nd-Zn-Zr Based Magnesium Matrix Composite Reinforced with Alumina Fibers

Microstructure of C fibre reinforced AZ91D composites

Achieving high strength in graphene nanoplatelets reinforced Mg-Zn-Mn matrix composites via liquid-state molding technology and low temperature deformation process

Study of the C/ Mg Interface in Magnesium Matrix Composites Reinforced by Carbon (Graphite) Fiber

Mechanical Behavior of a Hybrid Reinforced Magnesium Composite Fabricated by Pressure Infiltration Method

Microstructure and mechanical properties of steel wire reinforced Mg matrix composites fabricated by composite extrusion

Effect of Mg Content on the Mechanical Properties and Microstructure of Gr(F)/Al Composite

Microstructure and mechanical behavior of Mg ZK60/Al 1100 composite plates fabricated by co-extrusion

Micro-structural and tensile strength analyses on the magnesium matrix composites reinforced with coated carbon fiber

Mg/ZrO2 Metal Matrix Nanocomposites Fabricated by Friction Stir Processing: Microstructure, Mechanical Properties, and Corrosion Behavior

Interfacial microstructure and strengthening mechanisms of Cf/Mg composite with double-layer interface

Microstructure and Properties of a Nano-Zro2-reinforced AlSi10Mg Matrix Composite Prepared by Selective Laser Melting

Microstructure and mechanical properties of extruded ZK60 magnesium alloy containing rare earth

Microstructure and mechanical properties of Mg–4Al–4Nd–0.5Zn–0.3Mn alloy

Effect of Reinforcement Spatial Distribution on Mechanical Properties of MgO/ZK60 Nanocomposites by Powder Metallurgy

Microstructure, mechanical properties and thermal conductivity of the short carbon fiber reinforced magnesium matrix composites

Interface microstructure and mechanical property of (Al2O3-SiO2)sf/AZ91D composite