Abstract:Silver isotopes have been extensively used in environment, archaeology, and economic geology. Nevertheless, accurate analysis of Ag isotope ratios faces challenges caused by the presence of matrix elements ( e.g. Zn, Cu, and Pb) in most sulfide samples due to isobaric and polyatomic interferences during multi-collector inductively coupled plasma mass spectrometry (MC-ICPMS) routines. Most of these elements, such as Cu and Pb, can be effectively removed after the first column through a tandem column setup. However, the complete removal of Zn from Ag remains a significant unresolved issue, particularly given their common coexistence in sulfide minerals. Combining previous studies and the chemical principle of ion exchange resin, we optimized a two-stage ion exchange procedure by meticulously adjusting solution volumes and the column separation process. A condensed Zn-doped NIST SRM (silver international standard reference material) 978a was tested for AG50W-X8 resin following our modified procedure, resulting in distinct elution curves of Ag and Zn. Subsequently, three sphalerite samples were selected for the optimized two-stage ion exchange procedure, and ICP-MS results of silver elution fractions demonstrated complete separation of Ag and Zn. The whole procedure achieved an Ag yield exceeding 98.1 ± 2.3% (2SD, n = 4). NIST SRM 978a and IAEA-S-1 (an in-house standard) were tested for long-term reproducibility with −0.001 ± 0.030‰ (2SD, n = 25) and 0.054 ± 0.023‰ (2SD, n = 22) of δ 109 Ag, respectively, indicating the high accuracy in MC-ICPMS routines. Zn-doped NIST SRM 978a and sphalerite samples were further subjected to the modified procedure, and they exhibited values of 0.004 ± 0.014‰ (2SD, n = 3) and −0.214 ± 0.033‰ (2SD, n = 12), respectively, for δ 109 Ag. Moreover, we selected eight sphalerite samples from several hypogene deposits in China and obtained δ 109 Ag values from −0.229‰ to 2.227‰, indicating the significant Ag isotopic fractionation between Ag-bearing and Zn-rich minerals in hypogene deposits. In conclusion, this study shows the feasibility of accurately measuring Ag isotopes in Zn-rich samples and reveals their application potential in related Ag-bearing and Zn-rich deposits.

Determination of Trace Se and Te in High Purity Silver by Inductively Coupled Plasma Mass Spectrometer

Highlights from Recent Literature

Determination Of Trace Elemental Inpurities In High Purity Trimethylgallium By Inductively Coupled Plasma-Atomic Emission Spectrometry

Determination of Platinum in Serum Samples by Inductively Coupled Plasma Mass Spectrometry with Microscale Flow Injection Based on a Heated Spray Chamber

Determination of Trace Elements in Sulfide Samples by Inductively Coupled Plasma-Mass Spectrometry

Determination of hydride-forming elements in high purity coppers by inductively coupled plasma atomic emission spectrometry

Determination of Mercurial Species in Fish by Inductively Coupled Plasma Mass Spectrometry with Anion Exchange Chromatographic Separation

Determination of Rare Impurities in High-Purity Germanium and Germanium Oxide by Inductively Coupled Plasma Atomic Emission Spectrometry

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Coupling of an electrodialyzer with inductively coupled plasma mass spectrometry for the on-line determination of trace impurities in silicon wafers after surface metal extraction

Determination of Trace Indium in Geochemical Samples Using Electrothermal Atomization/Laser-Excited Atomic Fluorescence Spectrometry after a Solvent Extraction

Determination Of Ultra-Trace Amounts Of Selenium In Environmental Samples By Sequential Injection-Hydride Generation-Nondispersive Atomic Fluorescence Spectrometry

Evaluation of internal standardization for the determination of semivolatile analytes in difficult matrices by simultaneous multielement atomic absorption spectrometry

THE DETERMINATION OF Se ENVIRONMENTAL BACKGROUND VALUE IN NATURAL RIVER WATER USING MIXED MATRIX MODIFIER-STPF

Accurate determination of stable silver isotopes in zinc-rich samples through effective separation of silver and zinc

Electrodeposition as a Preconcentration and Sample Preparation Technique for Trace Selenium and Tellurium Determination by X-Ray Fluorescence Spectrometry

Analysis of High-Purity Germanium Dioxide by Inductively Coupled Plasma Atomic Emission Spectrometry with Reaction Distillation of the Matrix

Determination of 14 trace rare earth impurities in high-purity CeO2 by inductively coupled plasma mass spectrometry with membrane desolvation

Simultaneous speciation of inorganic arsenic, selenium and tellurium in environmental water samples by dispersive liquid liquid microextraction combined with electrothermal vaporization inductively coupled plasma mass spectrometry