Abstract:Background: Solid phase extraction (SPE) is a standard sample preparation technique in HPLC workflows. Inline cartridges are high-performance alternatives to manual or robotic systems but at long term, they suffer from irreversible sorption of matrix components and sorbent compaction. Bead injection (BI) is a niche fluidic technique that allows renewing a sorbent bed through the manipulation of its suspension. However, there is a need for a versatile and reliable tool in HPLC that can exchange the inline sorbent automatically, resorting to inexpensive and assorted bulk sorbents. Results: We present a new flow path for a liquid chromatographic injector to perform inline micro-solid phase extraction. The sample is processed at real time, trapping the analytes and discarding the matrix. Cleaning the matrix and injecting 10 μL of sample takes 70 s, comparable with the injection in commercial HPLC systems. If the aim is to preconcentrate the analytes, average enrichment factors of 250 have been obtained after processing sample volumes of 3200 μL in 16 min (interleavable with the chromatographic step), keeping the peak position and width independent of the injected volume (compared to large volume direct injection). The desired bed mass is automatically and pressure-driven manipulated in the valve, retained by an inline frit, and optionally, after the analysis, removed by forward flow. The chromatographic performance of the new design is compared to the standard 6-port, 2-position HPLC injector. As a case study, we have monitored the extraction kinetics of a cyclodextrin-based bioaccessibility extraction test of persistent organic contaminants in soil, by extracting several fractions in valve, process them with inline SPE with a balanced hydrophilic-hydrophobic reversed-phase sorbent, and inject the bioaccessible compounds into HPLC. Aiming at avoiding carryover, the sorbent bed (ca. 3 mg) is exchanged before every run. It should be noted that this contribution focuses on HPLC, but other non-separative techniques, such as Flow Injection Analysis, can equally benefit from this injection platform. Significance: This contribution reports the first use of inline BI-solid phase extraction in HPLC workflows, without heart-cut eluate injection, in which the sorbent can be exchanged automatically by forward flow. This performance is enabled by prototyping a valve that can autonomously swap sorbents in real-time for diverse samples, as a cartridge exchanger, but using cost-effective and environmentally friendlier bulk sorbents (bed masses from sub-mg to 5 mg) without requiring additional hardware.

Sequential Injection–bead Injection–lab-on-valve Schemes for On-Line Solid Phase Extraction and Preconcentration of Ultra-Trace Levels of Heavy Metals with Determination by Electrothermal Atomic Absorption Spectrometry and Inductively Coupled Plasma Mass Spectrometry

On-line sample-pre-treatment schemes for trace-level determinations of metals by coupling flow injection or sequential injection with ICP-MS

On-Line Ion Exchange Preconcentration in A Sequential Injection Lab-On-Valve Microsystem Incorporating A Renewable Column with Etaas for the Trace Level Determination Bismuth in Urine River Sediment

Optimized ultrasound-assisted dispersive liquid–liquid microextraction for simultaneous trace multielement determination of heavy metals in environmental water samples by ICP-MS

Sequential/bead Injection Lab-on-valve Incorporating a Renewable Microcolumn for Co-Precipitate Preconcentration of Cadmium Coupled to Hydride Generation Atomic Fluorescence Spectrometry

Online coupling of bead injection lab-on-valve analysis to gas chromatography: application to the determination of trace levels of polychlorinated biphenyls in solid waste leachates.

Application of a macrocycle immobilized silica gel sorbent to flow injection on-line microcolumn preconcentration and separation coupled with flame atomic absorption spectrometry for interference-free determination of trace lead in biological and environmental samples

Flow Injection On-Line Separation and Preconcentration for Electrothermal Atomic Absorption Spectrometry. Part 1. Determination of Ultratrace Amounts of Cadmium, Copper, Lead and Nickel in Water Samples

Simultaneous determination of trace amounts of nickel, copper and mercury by liquid chromatography coupled with flow-injection on-line derivatization and preconcentration

On-line Separation and Preconcentration in Flow Injection Analysis

Bead Injection Extraction Chromatography Using High-Capacity Lab-On-Valve As A Front End To Inductively Coupled Plasma Mass Spectrometry For Urine Radiobioassay

High Efficiency Low Sample Consumption On-Line Ion-Exchange Pre-Concentration System for Flow Injection Flame Atomic Absorption Spectrometry

Flow injection on-line solid phase extraction for ultra-trace lead screening with hydride generation atomic fluorescence spectrometry.

Simultaneous On-Line Preconcentration and Determination of Trace Metals in Environmental Samples by Flow Injection Combined with Inductively Coupled Plasma Mass Spectrometry Using a Nanometer-Sized Alumina Packed Micro-Column

New Developments in Flow Injection/Sequential Injection On-line Separation and Preconcentration Coupled with Electrothermal Atomic Absorption Spectrometry for Trace Metal Analysis

Mesoporous Titanium Dioxide As a Novel Solid-Phase Extraction Material for Flow Injection Micro-Column Preconcentration On-Line Coupled with ICP-OES Determination of Trace Metals in Environmental Samples.

Versatile injector for inline renewable solid-phase extraction: Application to cyclodextrin-based bioaccessibility assessment in environmental solids

Time-based and volume-based sampling for flow-injection on-line sorbent extraction graphite furnace atomic absorption spectrometry

An Efficient Flow-Injection System with On-Line Ion-Exchange Preconcentration for the Determination of Trace Amounts of Heavy Metals by Atomic Absorption Spectrometry

Flow Injection On-Line Solid Phase Extraction Coupled with Inductively Coupled Plasma Mass Spectrometry for Determination of (ultra)trace Rare Earth Elements in Environmental Materials Using Maleic Acid Grafted Polytetrafluoroethylene Fibers As Sorbent